Instruction/ maintenance manual of the product WE26 Hotpoint
Go to page of 8
GB 1 Contents Installation, 2 Location and power connection T echnical information Product Description, 3 Interior Parts Using the Wine Cellar 4 Bottle ageing compartment Manual temperature contr ol T.
GB 2 Installation ! It is important that you keep this user guide handy so that you can refer to it at any time. Should you sell, give away , or move the wine cellar , please make sure that this user guide is with it. ! Read this user guide thoroughly .
GB 3 Product Description Interior Parts Control Panel CONTROL P ANEL DOOR SHEL VES BOTTLE AGEING COMP ARTMENT D ATA P L AT E LIGHT CURRENT TEMPERA TURE COOLING LIGHT INDICA T OR LIGHT PO WER CONNECTIO.
Bottle ageing compartment The ageing compartment's main function is that of guaranteeing that your wines are pr eserved in optimal conditions. The wine cellar's temperature was factory pre-set at 15° C, a temperature that is consider ed optimal for most wines.
GB 5 T able of ideal wine temperatures This table indicates the approximate temperatur es at which wine should be served. Should one of your wines need to be served at a temperature that is gr eater than the temperature inside your wine cellar , we suggest that you leave it wine out for the time that is necessary before you serve it.
Standard 36-bottle stock The 36-bottle stock (for standard, mixed, and r enana bottles) is recommended for wines that need to be visible and easily removed. Position each bottle into the slots on the 5 wooden shelves. 6 bottles can be placed on the bottom of the wine cellar .
Removing the wooden shelves Follow the instructions below to remove the wooden shelves: 1. Hold the front part of the shelf with one hand. 2. With the other hand push the back of the shelf upward. 3. Slowly remove the shelf by pulling it towar d you. Pull out the shelf by 1/3 of the way if you need to remove or replace bottles.
GB 8 Maintenance and troubleshooting Care and maintenance Disconnecting the wine cellar During cleaning and maintenance, it is imperative that you unplug the wine cellar T roubleshooting If you notice that your wine cellar is not working properly , check with the following list before you call your Service Centre.
An important point after buying a device Hotpoint WE26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint WE26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint WE26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint WE26 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint WE26 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint WE26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint WE26.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint WE26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint WE26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
