Instruction/ maintenance manual of the product CMN3000R HSM
Go to page of 16
Owner ’ s Operating Manual CMN SERIES CONTINUOUS POWER SYSTEM MODEL COVERED: CMN3000R CMN4000R Information contained herein is the property of Clary Co rporation, is proprietary, confidential, and not to be disclosed, disseminated or used exc ept for the purpose provided by CLARY CORPORATION P/N 510-14040 REV.
THE CONTINUOUS POWER COMPANY T ABLE OF CONTENTS TITLE PAGE TABLE OF CONTENTS……………………………………………………………………………… 2 INTRODUCTION……………………………………………………………………………………….
THE CONTINUOUS POWER COMPANY Page 3 INTRODUCTION ongratulations! You have selected the highest quality protection for your continuous power needs. This unit offers a quiet and compact package with superior performance you can depend on.
THE CONTINUOUS POWER COMPANY Page 4 TECHNICAL DESCRIPTION he Digital Technology-High Temperature CMN Series Continuous Power System (CPS) is a revolutionary new c oncept in total power protection and management. The CMN SERIES is a microproce ssor-based UPS that now allows the user to set most of the control feature parameters.
THE CONTINUOUS POWER COMPANY SIMPLIFIED SYSTEM INTERCONNECT DC IN CMN SERIES REAR PANEL AC IN + - + - BATTERY BANK + - + - + - + - + - + -.
THE CONTINUOUS POWER COMPANY Page 6 P ACKAGING our CMN SERIES has been carefully packaged to withstand most abuse sustained during shipment. The packing material has been specifically desi gned to protect this system for normal handling, using most shipping carriers.
THE CONTINUOUS POWER COMPANY Page 7 LOAD 50% 25% OVER 75% 100% (800)-44-CLARY WWW. CLARY.COM STATUS LOW BATTERY FULL SILENCE/ INV START AC IN OK ALARM COLD LOAD I LOAD II ALARM TEST PHYSICAL DESCRIPTION his section will point out and illustrate the various indicators, functions and controls of the CMN SERIES UPS.
THE CONTINUOUS POWER COMPANY Page 8 RACKMOUNT REAR PANEL VIEW 20 INPUT - AC Line Plug 24 SIGNAL – Open Collector 21 DC INPUT - Auxiliary battery connector 25 RS232 - RS232 communications signals 22 .
THE CONTINUOUS POWER COMPANY Page 9 SUMMARY OF INDICATORS AND CONTROLS SYSTEM POWER SWITCH - The main control switch that engages utility power to the entire unit. By activating this switch it initializes normal operation. Input circuit breaker must be on.
THE CONTINUOUS POWER COMPANY Page 10 INST ALLA TION he CMN Series unit is designed for installation in a protected environment. Units may be installed in a 19" rack system.
THE CONTINUOUS POWER COMPANY Page 11 OPERATION nce the system has been pr operly installed, it is ready to operate. The following procedures will explain how to start-up the system while plugged into rated electrical power and also how to start-up with no AC power available.
THE CONTINUOUS POWER COMPANY Page 12 SIGNALS AND INTERF ACING t the rear of the unit are two DB-9, subminiature, female connectors. These are provided for communications links to a computer or sophisticated monitoring device.
THE CONTINUOUS POWER COMPANY Page 13 SPECIFICA TIONS ELECTRICAL Input CMN3000R/CMN4000R Voltage 120V +10%, -20% (without Battery discharge) Power Factor Corrected IAW MIL STD.
THE CONTINUOUS POWER COMPANY Page 14 CARE AND MAINTENANCE his device is designed to be maintenance-free. It can be cleaned with a damp cloth or nonabrasive cleanser. WARNING : Do not use ACETONE-BASE cleaning solutions. Keep cleaning solutions out of the electrical receptacles on this device.
THE CONTINUOUS POWER COMPANY Page 15 SERVICE AND REP AIR our CMN SERIES is backed by one of the finest customer service teams available. Write or call them at any time to obtain more information about your unit. Clary Corporation 150 E. Huntington Dr.
THE CONTINUOUS POWER COMPANY Page 16 CLARY CORPORATION LIMITED WARRANTY STANDARD CMN SERIES DEPOT REPAIR Clary Corporation warrants the electronics of the Clary CMN Series UPS to be free from defects in material and workmanship for a period of tw o years from the Date of Purchase.
An important point after buying a device HSM CMN3000R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HSM CMN3000R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HSM CMN3000R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HSM CMN3000R you will learn all the available features of the product, as well as information on its operation. The information that you get HSM CMN3000R will certainly help you make a decision on the purchase.
If you already are a holder of HSM CMN3000R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HSM CMN3000R.
However, one of the most important roles played by the user manual is to help in solving problems with HSM CMN3000R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HSM CMN3000R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
