Instruction/ maintenance manual of the product YTH2242TDRF Husqvarna
Go to page of 48
YTH2242TDRF Owner's Manual 532 44 40-08 Rev . 17 Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty .
2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROW ING OBJECTS. F AIL URE TO OBSERVE THE FOLL OWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH.
3 SAFETY RULES Safe Operation Practices for Ride-On Mowers • Ensure the area is clear of bystanders before operating. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary . Al ways look down and behind before and while backing.
4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ....................................
5 UNAS SEMBLED P ARTS K eys (2) Keys Slope Sheet AS SEMBL Y Y our new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. Fig. 1 Fig. 2 TO CHECK BA TTERY (See Fig. 1) • Lift hood to raised position.
6 AS SEMBL Y CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be prop- erly leveled.
7 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only.
8 OPERA TION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING Y OUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference.
9 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs.
10 OPERA TION TO ADJUST MOWER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. TO MOVE FORWARD AND BACK WARD (See Fig. 7) The direction and speed of movement is controlled by the forward and reverse drive pedals.
11 OPERA TION Fig. 11 TO TRANSPORT (See Fig. 11) When pushing or towing your tractor , be sure to disengage transmission by placing freewheel control in free wheel ing po- si tion. Free wheel control is located at the rear drawbar of tractor . • Raise attachment lift to highest position with at tach ment lift control.
12 OPERA TION RESERVE FUEL VAL VE OPERA TION (See Fig. 13) 1. Raise seat to access reserve fuel valve. 2. In normal operation, valve should be set to primary (as shown in view) 3. If tractor runs out of fuel, rotate valve handle to reserve. 4. Drive tractor to be refueled.
13 OPERA TION TO ST ART ENGINE (See Fig. 3) When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. • Be sure freewheel control is in the transmission en gaged position.
14 OPERA TION MOWING TIPS • DO NOT use tire chains when the mower hous ing is attached to tractor . • Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.
15 MAINTENANCE ➀ General Purpose Grease ➁ Refer to Maintenance “ENGINE” Section 01965 ➁ ENGINE ➀ FRONT WHEEL BEARING ZERK ➀ STEERING SECTOR GEAR TEETH ➀ FRONT WHEEL BEARING ZERK ➀ SP.
16 MAINTENANCE TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERA TION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed.
17 MAINTENANCE V -BEL TS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able. Re place belts if they begin to slip from wear . ENGINE LUBRICA TION Only use high quality detergent oil rated with API service classification SG-SL.
18 AIR FIL TER Y our engine will not run properly using a dirty air filter . Ser - vice air cleaner more often under dusty conditions. MAINTENANCE MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage.
19 MAINTENANCE DECK WASHOUT PORT (See Fig. 21) Y our tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.
20 SERVICE AND ADJUSTMENTS WARNING: TO A VOID SERIOUS INJURY , BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • T urn ignition key to “STOP ” and remove key .
21 SERVICE AND ADJUSTMENTS E A M Q F B C C O H D D P Fig. 25 Fig. 26 • Install belt onto electric clutch pulley (M). Fig. 23 Fig. 24 • A TT ACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
22 SERVICE AND ADJUSTMENTS FRONT -TO-BACK ADJUSTMENT (See Figs. 30 & 31) IMPORT ANT : Deck must be level side-to-side. T o obtain the best cutting re sults, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.
23 SERVICE AND ADJUSTMENTS TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be serviced.
24 SERVICE AND ADJUSTMENTS TO ST ART ENGINE WITH A WEAK BA TTERY (See Fig. 37) WARNING : Lead-acid batteries gen- er ate ex plo sive gases. K eep sparks, flame and smoking ma te ri als away from bat ter ies. Always wear eye pro tec tion when around batteries.
25 07002 SERVICE AND ADJUSTMENTS TO REPL ACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood.
26 Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark.
27 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. W ait several minutes before attempting to start.
28 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine continues to run when operator leaves seat with attachment clutch engaged 1. F aulty operator-safety presence control system. 1. Check wiring, switches and connections. If not corrected, contact an authorized service center/ department.
29 SERVICE NOTES.
30 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 DECALS NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO . NO. DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-vgt WHEELS AND TIRES KEY P ART NO .
31 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 SCHEMA TIC NO TES M FUSE ST ARTER SOLENOID BA TTER Y ELECTRIC CLUTCH CLUTCH/BRAKE (PED AL UP) REVERSE SWITCH (NO T IN REVER.
32 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 ELECTRICAL 8 1 99 100 91 2 27 90 28 55 26 43 41 24 27 25 30 33 22 79 21 40 71 34 With Service Minder Option 46 46 With 12V .
33 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 16 34-65 Battery 2 874 76 04-12 Bolt Hex Head 1/4-20 x 3/4 8 532 18 64-91 .
34 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 CHASSIS 182 176 176 175 150 130 130 177 chassis-tex_GT HUSQ II_90_r1 178 165 68 217 194 228 228 236 236 235 180 235 183 183.
35 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 CHASSIS KEY P ART NO . NO . DESCRIPTION 2 532 41 22-82 Drawbar Lower 3 532 44 44-81 Applique 5 532 43 74-86 Dash 14 532 44 .
36 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 DRIVE 231 51 170 185 225 125 drive-tex_K46_pedal_71_r2 56 70 74 220 74 213 221 160 206 26 207 209 92 125 116 64 188 161 35 .
37 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 DRIVE 1 – – – – – – T ransaxle, TUFF TORQ K46CR (426121) (Order parts from transaxle manufacturer) 2 532 12 35-83 K ey 15 819 13 13-16 W asher 13/32 x 13/16 x 16 Ga.
38 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 ENGINE 1 84 12 11 41 42 85 29 SP ARK ARRESTER KIT 45 62 71 70 79 69 87 2 engine-te x_bs-2cyl_59 9 90 91 18 15 37 37 28 28 3.
39 KEY P ART NO . NO. DESCRIPTION 1 – – – – – – Engine Briggs Model No. 40H777-1575-G5 (442152) (Order parts from engine manufacturer) 2 532 14 97-23 Muffler 9 532 19 43-20 Keeper Belt Eng.
40 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 STEERING ASSEMBL Y 19 60 59 58 16 28 28 13 22 64 35 67 63 63 1 21 6 15 14 5 81 13 13 8 53 62 81 61 82 15 14 14 14 15 80 85 .
41 KEY P ART NO . NO. DESCRIPTION 1 532 43 97-40 Wheel, Steering 2 532 43 68-70 Axle Asm., Front 4 532 43 68-73 Spindle Asm., LH 5 532 43 68-74 Spindle Asm.
42 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 SEA T AS SEMBL Y 1 532 43 98-22 Seat 2 532 18 01-66 Bracket Pivot Fender 3 532 14 06-75 Strap, Asm Fender 6 873 80 06-00 Nut, Lock w/Ins.
43 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 MOWER LIFT KEY P ART NO . NO. DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO . NO. DESCRIPTION 2 532 42 20-27 Shaft Asm., Lift 3 532 19 52-30 Lever Asm.
44 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 MOWER DECK 3 4 5 8 9 10 12 13 14 18 19 22 23 25 26 27 28 29 30 31 33 34 40 41 42 43 44 45 46 50 51 52 53 54 56 1 2 6 7 11 1.
45 TRACTOR - MODEL NO . YTH2242TDRF (96041023700), PRODUCT NO . 960 41 02-37 MOWER DECK KEY P ART NO . NO. DESCRIPTION KEY P ART NO . NO. DESCRIPTION NOTE : All component dimensions given in U.
46 SERVICE NOTES.
47 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
01.22.14 JM Printed in the U.S.A..
An important point after buying a device Husqvarna YTH2242TDRF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna YTH2242TDRF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna YTH2242TDRF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna YTH2242TDRF you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna YTH2242TDRF will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna YTH2242TDRF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna YTH2242TDRF.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna YTH2242TDRF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna YTH2242TDRF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
