Instruction/ maintenance manual of the product H2XXXX-XXX-X Ingersoll-Rand
Go to page of 12
E 2001 D PRINTED IN U.S.A. & (419) 636-4242 D F AX (419) 633-1674 INGERSOLL-RAND COMP ANY P .O. BOX 151 D ONE ARO CENTER D BRY AN, OHIO 43506Ć0151 OPERA T OR’S MANUAL H2XXXX-XXX-X RELEASED: 1 1-20-87 REVISED: 1-26-01 (REV .
H Series Valves 2O F1 2 W arnings and Cautions APPLICA TION W ARNINGS: 1. ARO valves are designed for use only in industrial pneumatic (air) and / or vacuum systems applications and are NOT to be used for individual consumer use, application or service.
3O F1 2 H Series Valves NOT SHOWN 1 16343 LABEL n Y195-68-C SCREW (2) 1 15021 BODY 9020 PISTON SUB-BASE (SEE T ABLE) 1 15006 COVER Y109-428 NUT Y325-25 “ O ” RING Q PRESSURE RANGE: 30 - 150 p.
H Series Valves 4O F1 2 1 16218-XX COIL PRESSURE RANGE: 30 - 150 p.s.i. (2.1 - 10.4 bar) NOT SHOWN 1 16343 LABEL n Y195-68-C SCREW (2) l 1 16346 SCREW (2) l 1 18126 PIPE PLUG 1 15021 BODY 9020 PISTON .
5O F1 2 H Series Valves PRESSURE RANGE: 20 - 150 p.s.i. (1.4 - 10.4 bar) NOT SHOWN 1 16154 LABEL n Y195-68-C SCREW (2) 9020 PISTON (2) SUB-BASE (SEE T ABLE) 1 15007 COVER Y109-428 NUT (2) 9019 INSERT .
H Series Valves 6O F1 2 PRESSURE RANGE: 25 - 135 p.s.i. (1.7 - 9.3 bar) NOT SHOWN 1 16154 LABEL n Y195-68-C SCREW (2) Q Y325-10 “ O ” RING l 1 16346 SCREW (2) l 1 18126 PIPE PLUG 9020 PISTON (2) S.
7O F1 2 H Series Valves PRESSURE RANGE: 25 - 135 p.s.i. (1.7 - 9.3 bar) NOT SHOWN 1 16154 LABEL n Y195-68-C SCREW (2) l 1 16346 SCREW (4) l 1 18126 PIPE PLUG 9020 PISTON (2) SUB-BASE (SEE T ABLE) 1 15.
H Series Valves 8O F1 2 PRESSURE RANGE: 25 - 135 p.s.i. (1.7 - 9.3 bar) NOT SHOWN 1 16154 LABEL n Y195-68-C SCREW (2) 1 16346 SCREW (4) 1 18126 PIPE PLUG 9020 PISTON (2) SUB-BASE (SEE T ABLE) 1 15007 .
9O F1 2 H Series Valves 1A THRU 1E 23 4 5 6 “ O ” RING FOR SEALING BETWEEN V AL VE AND MANIFOLD PORTS. “ O ” RING T O BLOCK OUTLET IN BASE OF V AL VE, NO PORT IN MANIFOLD. INLET 1/2 - 14 N.P .T . OUTLET 1/2 - 14 N.P .T . NOTE: OUTLET ON V AL VE MUST BE USED.
H Series Valves 1 0O F1 2 5A THRU 5E 13 4 2 7 “ O ” RING FOR SEALING BETWEEN V AL VE AND MANIFOLD PORTS. INLET 1/2 - 14 N.P .T . OUTLET 1/2 - 14 N.
1 1 OF 12 H Series Valves.
H Series Valves 1 2O F1 2 PN 119999Ć37.
An important point after buying a device Ingersoll-Rand H2XXXX-XXX-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand H2XXXX-XXX-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand H2XXXX-XXX-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand H2XXXX-XXX-X you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand H2XXXX-XXX-X will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand H2XXXX-XXX-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand H2XXXX-XXX-X.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand H2XXXX-XXX-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand H2XXXX-XXX-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
