Instruction/ maintenance manual of the product ET100 InStep
Go to page of 6
1 Keep this manual for future reference. If you sell or give this stroller away , make sure you give this manual to the new owner . Ask them to read instructions completely . Elite ET100 STR OLLER Elite Operating Instructions Important: Read and follow these Safety Rules and Assembly Instructions before operating stroller .
2 IMPOR T ANT T ires are shipped deflated, DO NOT OVERINFLA TE. Please inflate slowly , with short bursts, to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child. We appreciate your purchase of one of our many fine products. W e are sure that you will be satisfied with your selection.
3 Step 3. Front Wheel Assembly T urn stroller upright onto its rear wheels and then tip stroller back so that the handlebar is down on the ground and the front fork is up. The front brake Quick Release lever (Q/R), located on the front fender , should be in the open position (Figure C).
4 Use Instructions T o close/ fold stroller: W ARNING: Always remove child from stroller before folding. Push canopy back and pull the seat back forward. Flip the latches from the lower bar . Push down on the handle, the stroller will automatically begin to fold, the front wheel will fold under frame and the handle will fold downward (Figure F).
5 J K PROPER USE OF SEA T BEL TS & SHOULDER STRAPS: W ARNING: Avoid Serious Injury . Always use seat belts 1. Place child in seat. Make sure T -Shield is between the child’s legs 2. When child is seated, place shoulder straps over the child’s shoulders.
6 Care and Maintenance Check fasteners After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary . Periodically check the stroller to ensure that it is in good operating condition.
An important point after buying a device InStep ET100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InStep ET100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InStep ET100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InStep ET100 you will learn all the available features of the product, as well as information on its operation. The information that you get InStep ET100 will certainly help you make a decision on the purchase.
If you already are a holder of InStep ET100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InStep ET100.
However, one of the most important roles played by the user manual is to help in solving problems with InStep ET100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InStep ET100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center