Instruction/ maintenance manual of the product Device View Intel
Go to page of 36
Intel ® Device V iew User Guide 713265-001.
Year 2000 Capable An Intel product, when used in accordance with its associated documentation, is “Year 2000 Capable” when, upon installation, it accurately stores, displays, processes, provides, .
Contents Quick Start 1 Chapter 1 – Installation 3 Overview ....................................................................................................................... ........................... 3 Choosing a version .....................
1 Quick Start For complete installation instructions and requirements, see Chapter 1. 1 2 Run the install program Put the Intel® Device View CD-ROM in your computer’s CD-ROM drive. The Intel Device View installation screen appears. If it doesn’t appear, run autoplay.
2 4 5 Device Tree Device image Run Intel Device View Windows version Click the Intel Device View – Windows icon in the Intel Device View program group. Web version • To run Intel Device View from the Web server, click the Intel Device View – Web icon in the Intel Device View program group.
Installation Overview This chapter explains how to install Intel Device View and lists system requirements for each version of the program. Intel Device View supports these Intel network devices: Hubs.
4 CHAPTER 1 INTEL DEVICE VIEW USER GUIDE Choosing a version When you install Intel Device View, you have three installation options: Install for Windows The Windows version of Intel Device View allows you to manage Intel networking devices from a single PC on the network.
5 INSTALLATION CHAPTER 1 System requirements Windows version Minimum hardware requirements Recommended 133 MHz or faster Intel Pentium®, Pentium Pro, processor or Pentium II Processor Memory At least 32 MB Disk space At least 25 MB Operating • Windows 95 or 98 system • Windows NT 4.
6 CHAPTER 1 INTEL DEVICE VIEW USER GUIDE Web client Recommended 133 MHz or faster Intel Pentium, Pentium Pro, or processor Pentium II Processor Memory At least 32 MB Disk space At least 25 MB Operating • Windows 95 or 98 system • Windows NT 4.0 or later (server or workstation) Web browser Internet Explorer 4.
7 INSTALLATION CHAPTER 1 Installing Intel Device V iew Before you install Intel Device View, make sure your PC meets the system requirements on pages 5-6. 1 Put the Intel Device View CD-ROM in your computer’s CD-ROM drive. The Intel Device View installation screen appears.
8 CHAPTER 2 INTEL DEVICE VIEW USER GUIDE Using Intel Device V iew Overview This chapter explains how to start Intel Device View and use some of its basic features. All the procedures described in this chapter are the same for the Windows, Web, and plug-in versions of Intel Device View.
9 USING INTEL DEVICE VIEW CHAPTER 2 Starting Intel Device V iew Windows version Click the Intel Device View – Windows icon in the Intel Device View program group. The main page appears. W eb version • To run Intel Device View on the Device View server, click the Intel Device View – Web icon in the Intel Device View program group.
10 CHAPTER 2 INTEL DEVICE VIEW USER GUIDE Installing a new device After you’ve installed a new hub, switch, or router on your network, you can use Intel Device View’s Device Install wizard to configure the device for management.
11 USING INTEL DEVICE VIEW CHAPTER 2 Managing a device To manage a device 1 In the Device Tree, double-click the icon of the device you want to manage. The device image appears. 2 Select a management option: • Right-click a port to view management options for the port.
12 CHAPTER 2 INTEL DEVICE VIEW USER GUIDE Using the Device T ree When you start Intel Device View, the Device Discovery service begins searching for supported Intel network devices on your network. As it discovers devices, the Device Discovery service adds an icon for each device to the Device Tree on the left side of the screen.
13 USING INTEL DEVICE VIEW CHAPTER 2 Adding a device to the Device Tree To add a device to the Device Tree 1 Right-click anywhere on the Device Tree. 2 Click Add Device on the menu that appears. 3 In the Add an SNMP device dialog box, enter the IP address of the device you want to add.
14 CHAPTER 2 INTEL DEVICE VIEW USER GUIDE Views and windows Intel Device View provides several different views and windows that display different types of information about the device you’re managing. To change to a different view or window, click its tab.
15 USING INTEL DEVICE VIEW CHAPTER 2 Diagnostics window The Diagnostics window lists all diagnostic messages sent by the device being managed. T rap window The Trap window lists all traps received by the Device View PC or server. Traps are color coded based on severity.
16 CHAPTER 2 INTEL DEVICE VIEW USER GUIDE Errors window The Error view lists all error messages generated by the switch or router being managed..
Managing Devices Overview This chapter describes how to perform several management tasks on Intel hubs, switches, and routers. For more detailed information on product features, see the documentation that shipped with the device.
18 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE Managing Intel Express Stackable Hubs Intel Device View supports these Intel stackable hubs: • Express 220T Stackable Hub • Express 210T Stackable Hub •.
19 MANAGING DEVICES CHAPTER 3 Basic management tasks This section describes some basic hub management tasks. For more information on these or other procedures, see the documentation that ships with the hub and management module. Managing a port 1 Right-click the port you want to manage.
20 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE To set port security (Express 220T only) Setting port security “secures” a port for use by a specific MAC address.
21 MANAGING DEVICES CHAPTER 3 To add a trap receiver 1 Right-click the hub image. 2 Click Management Module, then click Trap Receiver Configuration on the menu that appears. 3 Click Add in the Trap Receivers dialog box. 4 Type the IP address and community string of the PC you want to receive traps from the Management Module, then click Add.
22 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE 4 Select the segment you want to monitor in the Interface pull-down box. Segment 1 is the 10Mbps segment. Segment 2 is the 100Mbps segment. 5 Check the statistic you want to monitor and change the threshold value if necessary.
23 MANAGING DEVICES CHAPTER 3 Managing Intel Express Switches This section describes some basic switch management tasks. For more information on these or other procedures, see the documentation that ships with the switch.
24 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE Basic management tasks Managing a port 1 Right-click the port you want to manage. 2 Click Port Setup on the menu that appears. The Port Setup dialog box appears. To set port speed and duplex mode 1 Click the Port Mode tab in the Port Setup dialog box.
25 MANAGING DEVICES CHAPTER 3 Graphing device activity Intel Device View allows you to view graphs of total packets, transmitted packets, received packets, and errors. To graph device activity 1 Right-click anywhere on the switch image, except a port.
26 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE 4 Click Add. 5 Choose the IP address of the trap receiver. • To use the PC you’re managing from, click This PC. • To send traps to another PC on the network, type the IP address and community string of the PC you want to use.
27 MANAGING DEVICES CHAPTER 3 4 Select the port you want to monitor in the Interface pull-down box. 5 Check the statistic you want to monitor and change the threshold value if necessary.
28 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE Managing Intel Express Routers This section describes some basic router management tasks. For more information on these or other procedures, see the documentation that ships with the router.
29 MANAGING DEVICES CHAPTER 3 Basic management tasks This section describes some basic router management tasks. For more information on these or other procedures, see the documentation that ships with the router. Monitoring WAN traffic To monitor WAN traffic 1 Right-click anywhere on the router image, except a port.
30 CHAPTER 3 INTEL DEVICE VIEW USER GUIDE 3 Double-click a name for more information. The Link Details dialog box appears. Adding a trap receiver Add a trap receiver when you want a management PC alerted of an event that occurs on the router. 1 Right-click anywhere on the router image, except a port.
31 MANAGING DEVICES CHAPTER 3 5 Choose the IP address of the trap receiver. • To use the PC you’re managing from, click This PC. • To send traps to another PC on the network, type the IP address and community string of the PC you want to use. 6 Click OK, then click OK on the Management Setup dialog box.
32 INTEL DEVICE VIEW SOFTWARE LICENSE AGREEMENT IMPORTANT: Please review the License Agreement below. By doing so, or otherwise downloading or copying this Software, you agree to the terms of this Agreement. Do not load this software until you have carefully read and agreed to the following terms and conditions.
33 REGISTRATION : If a registration card is supplied with this license, this license shall only be valid if you register your acceptance of its terms and conditions with Intel.
An important point after buying a device Intel Intel Device View (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel Intel Device View yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel Intel Device View - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel Intel Device View you will learn all the available features of the product, as well as information on its operation. The information that you get Intel Intel Device View will certainly help you make a decision on the purchase.
If you already are a holder of Intel Intel Device View, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel Intel Device View.
However, one of the most important roles played by the user manual is to help in solving problems with Intel Intel Device View. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel Intel Device View along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
