Instruction/ maintenance manual of the product GCS932UB IOGear
Go to page of 32
Installation Installation Guide 2-Port USB DVI-D Cable KVM Switch with Audio and Microphone Support GCS932UB P ART NO. M1103.
.
3 T able of Contents Package Contents 4 System Requirements 5 Overview 6 Standard Installation 7 Advanced Installation 9 LED Indication 12 Port Switching 13 Hotkeys Summary T able 14 Autoscan Interval.
4 Package Contents 1 x 2-Port USB DVI-D Cable KVM Switch • 1 x Remote Switch Button • 1 x Installation Guide • 1 x W arranty Card •.
5 System Requirements Console DVI-D supported monitor • USB keyboard and mouse • Powered speakers and micr ophone (optional) • Computers T wo USB ports • A DVI-D supported connection • 3.
6 Overview Remote Switch Button 1. CPUs Mic. connection 2. CPUs Audio connection 3. CPUs DVI-D connection 4. CPUs USB Mouse connection 5. CPUs USB Keyboard connection 6. Remote Switch Button Port 7. Console USB Mouse Port 8. Console USB Keyboard Port 9.
7 Step 1 Please make sure your computers and monitor ar e powered of f before you start. Step2 Connect the DVI cable from your monitor to the console DVI monitor port. Then, turn on the monitor . Step 3 Connect your USB keyboard and mouse to the console USB keyboard port and console USB mouse port.
8 switch button port. Step 4 Connect your powered speaker and mic. to the console audio port and console mic. Port. Step 5 Connect a set of your molded KVM cable to each of your computers – DVI cable to the DVI output, USB cables to open USB ports from your computer , audio cable to your audio output and mic.
9 Step 1 Please make sure your computers and monitor ar e powered of f before you start. Step2 Connect the DVI cable from your monitor to the console DVI monitor port. Then, turn on the monitor . Step 3 Connect your USB keyboard to the console USB keyboard port.
10 Step 4 Connect a powered USB hub to the console mouse port, then connect the mouse to any available USB port in the hub. Then, connect any peripherals that you want to share between your computers to the other available USB ports in the hub. Note: Please make sure mouse emulation has been disabled for this setup to function correctly .
11 Step 6 Connect a set of your molded KVM cable to each of your computers – DVI cable to the DVI output, USB cables to open USB ports from your computer , audio cable to your audio output and mic. cable to the mic. input. Final Step T ur n on your computers.
12 LED Indication - LED will light up in Green showing the port that can be contr olled by the console. -BothLEDswillbeashingtogetherwhentheKVMisinFirewar eUpgradeMode.
13 Y ou can switch port via remote switch button, mouse or hotkey commands. Port Switching via Remote Switch Button Simply press the r emote switch button once to switch focus to the next port. Port Switching via Mouse Simply press scr oll wheel button twice rapidly to switch focus to the next port.
14 Hotkeys Summary T able Hotkey combination Description [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + *Note: If alternative hotkey sequence is chosen [Enter] Switch KVM and audio focus to the next port [k] [Enter] Switch KVM focus to the next port [s] [Enter] Switch audio focus to the next port [a] [Enter] Activate Autoscan Mode.
15 Hotkey combination Description [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + *Note: If alternative hotkey sequence is chosen [F4] [Enter] List out current settings Note: Please have a Notepad or word document opened before you trigger this function.
16 Autoscan Interval T able n Description 1 3 seconds 2 5 seconds (default) 3 10 seconds 4 20 seconds.
17 The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboar d. The emulation mappings are listed in the table below . Mac Keyboard Emulation *Note:Whenusingkeycombinations,pressandr eleasetherstkey(Ctrl),thenpressandreleasethe second key .
18 Sun Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboar d. The emulation mappings are listed in the table below .
19 Factory Default Settings Function Default Setting Autoscan Interval 5 seconds Hotkeys [Scroll Lock] [ Scr oll Lock] Keyboard Operating Platform PC compatible Mouse Emulation On Mouse Port-Switching.
20 Firmware Upgrade Note:Inordertoperformarmwar eupgrade,you need to use a computer that’ s not connected to the KVM. Step 1 Go to www .iogear .com to download the latest availablermwareorthespecicrmwar ethatyou wish to upgrade to.
21 Step 4 Windows will now install all the required drivers. Y ou may see the below message popup in tray icon area. Step 5 After you see the below message “Y our new hardwar e is installed and ready to use.”, extract thedownloadedlewithWinRARorcompatible software.
22 Step 6 Read the License Agreement and click “I Agr ee” then click “Next” if you wish to continue with the rmwareupgrade.Otherwise,click“Cancel”toexit. Step 7 Choose the correct KVM that you wish to perform rmwareupgradefr omthe“DeviceList”andthen clic k “Nex t” to c ontinu e.
23 Step 8 If you have checked the “Check Firmware V ersion” checkbox, then the utility will check the current rmwar ethatiso nyourKVM. Ifthecurr entrmwar e isnewerthanthermwarethat youwishtoupgrade to, a window will popup and prompt you to ask if you wish to proceed.
24 Upgrade Fail Unplugthe2USBconnectionsfromyourcomputerthathasperformedthermwar eupgrade.Then,repeat thermwareupgradepr ocessbyfollowingtheprocedureofFirmwareUpgradesectionstartingfr omstep3.
25 Federal Communications Commission (FCC) Statement 15.21 Y ouarecautionedthatchangesormodicationsnotexpresslyapprovedbythepartr esponsiblefor compliance could void the user’ s authority to operate the equipment.
26 THIS DEVICE COMPLIES WITH P ART 15 OF THE FCC RULES. OPERA TION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. this device may not cause interference and 2. this device must accept any interference, including interfer ence that may cause undesired operation of the device.
27 This device has been tested and found to comply with the requir ements set up in the council directive on the approximation of the law of member states r elating to EMC Directive 89/336/EEC, Low V oltage Directive 73/23/EEC and R&TTE Dir ective 99/5/EC.
28 The following contains information that relates to China. SJ/T 11364-2006 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉（Cd） 六价 (Cr(VI)) 多溴联苯 （PBB） 多溴二苯.
29 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT .
30 IOGEAR 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2009 IOGEAR ® Part No. M1103 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
31.
© 2009 IOGEAR ® FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the im po rta nce o f c on ser vi ng na tur al r eso ur ce s.
An important point after buying a device IOGear GCS932UB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IOGear GCS932UB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IOGear GCS932UB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IOGear GCS932UB you will learn all the available features of the product, as well as information on its operation. The information that you get IOGear GCS932UB will certainly help you make a decision on the purchase.
If you already are a holder of IOGear GCS932UB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IOGear GCS932UB.
However, one of the most important roles played by the user manual is to help in solving problems with IOGear GCS932UB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IOGear GCS932UB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
