Instruction/ maintenance manual of the product Motherboard DJ800 IWILL
Go to page of 56
IWILL D J 8 0 0 Motherboard User ’s Ma nual FB25634000.
DJ800 Motherboard User’s Manual ii.
Preface Disclaime r The ma nufa cturer makes no representations or warra nties regardi ng the contents of this ma nual a nd specifically disclaims a ny i mplied warra nties of mercha nta bility or fitness f or a ny particular purpose.
DJ800 Motherboard User’s Manual T able o f C ontents 1: Over view ............................................................................. 1-1 Pa cking list ................................................... .............................. 1-1 Safety Notice .
Preface 4: BIOS Setup ......................................................................... 4-1 Starting the BIOS Setup ........................................ .................... 4-1 Using the BIOS Setup Utility ................................
Cha pter 1 Overview.
Chapter 1 Pa c kage DJ800 Motherboard Three jumper ca ps (Extra ca ps in case original ca ps get lost) One Power Installation CD (contains drivers a nd utilities) DJ800 User ’s ma nual Rear pa nel I.
Overview DJ800 Motherboard Overview YOU MUST HA VE ENOUGH SYSTEM INTEG RA TION K NOWLEDGE BEFORE THE INST ALLA TION General Safety Precaution s ¡ Keep the area around the Server clea n a nd free of clutter .
Chapter 1 ¡ Use a grounded wrist stra p designed to prevent static dischar ge . ¡ Keep all components a nd printed circuit boards (PCBs) in their a ntistatic bags until rea dy for use. ¡ T ouch a grounded metal object before re moving the board from the a ntistatic bag.
Overview DJ800 Motherboard Overview Getting Help If a problem arises with your syste m during Installation or Ope ration, you should first a sk your dealer for help a s they have most lik ely config- ured your system . They generally have the be st grasp of your is sue s a nd the fa stest response f or your symptoms.
Chapter 1 DJ800 Specification s 1-5 On-Board LAN Expa nsion Slots Processor Intel ® Dual Xeon Socket 604 CPUs Supports 800MHz FSB Chi pset Intel E7525 Chi pset MCH Intel ICH5R Int.
Overview DJ800 Motherboard Overview 1-6 z 34-pin Floppy Connector z 4-pin CD-In a nd Aux-In audio input connector z 2x 40-pin IDE connectors, supports up to f our (4) Enha nced IDE devices z Dual Cha .
Cha pter 2 Components a nd Jumper Setting.
Hardware Installation DJ800 Motherboard Components and Jumper Setting 2-1 MAINBOAR D MAP MAINBOAR D MAP J57 J63 J46 J48 J66 J67 J68 J69 J34 J34A J43 JP16 JP1 JP18 JP19 JP10 JP10A PCI 32/33 PCI-X 64/13.
Chapter 2 Components List CPU1; CPU2 Intel Xeon Socket604 Processor Pri mary; Secondary IDE Driver Connectors Floppy Floppy Disk Driver Connector PCI Slots PCI-Express x16, x4 Slots; PCI-X 100,133; PC.
Hardware Installation DJ800 Motherboard Components and Jumper Setting 2-3 Jumper Setting JP1: Cle ar CMOS Hea der The onboard button cell battery powers the CMOS RAM. It con- tains all the BIOS setup information. Kee p the jumper connected to pins 1-2 (Default) to retain the R TC data a s shown below .
Chapter 2 JP10 a nd JP10A: Me mory V oltage Select Jumper This hea der lets you a djust the memory voltage. JP16: BIOS Fla sh Protect Jumper This jumper protects the syste m from unnecessary updating or fl ashing of the BIOS. It secures the BIOS therefore prevents a ccidental overwriting of the data stored in fla sh me mory .
Hardware Installation DJ800 Motherboard Components and Jumper Setting JP19: LAN Power Select Jumper This hea der lets you set your LAN connectors power status. Y ou ca n choose power sta ndby or not. J57: Front Audio Jumper This hea der lets you ena ble or disa ble the function of the fron t audio connector.
Chapter 2 PS/2 Mouse Connector (6-pin Fe male) The system will direct IRQ12 to the PS/2 mouse if one is detect ed. If no mouse is detected, IRQ12 will be free for expa nsion cards to use. PS/2 Keyboard Connector (6-pin Fe male) This connection is for sta ndard keyboards using a PS/2 (mini DI N) plug.
Hardware Installation DJ800 Motherboard Components and Jumper Setting IEEE 1394/ FireWire Connector (6-pin M ale) Y ou have one (1) onboard IEEE 1394 connector port for connecting FireW ire devices. Refer to IEEE 1394 Ports & Hea der for more inf ormation.
Chapter 2 Addition al I/O Connectors The M ainboard also contains connectors for a dding a dditional ports a nd devices to the M ainboard. J43: Front Pa nel Switch He a der Re set Button (2-pin RST) This 2-pin connector connects to the cha ssis-mounted reset swit ch f or rebooting your computer without turning your power switch o ff a nd on.
Hardware Installation DJ800 Motherboard Components and Jumper Setting ACPI LED ACPI function allows the system to enter or re sume from the Sus - pend mode. If your syste m cha ssis does not have this button, th e sa me function may be performed from your OS; if it is supported.
Chapter 2 J46: WOL Connector Function This connector lets you atta ch a ma naged network a da pter to the motherboard vi a a W ake-on-LAN ca ble. When the system is of f, th e ma naged network a dapter use s a n alternate power source to monitor the network.
Hardware Installation DJ800 Motherboard Components and Jumper Setting J63: IEEE 1394 (FireWire) He ader This M ainboard features a n integrated T exa s Instrument TSB43AB2 2 chi p which supports two (2) IEEE 1394 (Firewire) ports. IEEE 1394 (FireW ire) supports tra nsfer rates of up to 400MB/s.
Chapter 2 J66, J67, J68, J69 Serial A T A Connector DJ800 supports up to 6 SA T A devices ea ch with data at tra nsfer rates of 150MB/s. T wo Seri al A T A ports supported by ICH5R, a nd four Seri al A T A ports supported by Ada ptec 8110. Ada ptec 81 10 also supports RAI D configurations.
Hardware Installation DJ800 Motherboard Components and Jumper Setting J34 &J34A: USB 2.0 Ports a nd He ad er DJ800 supports eight USB 2.0 ports. USB 2.0 supports tra nsfer r ates of up to 480MB/s. Four ports show up on the on-board I/O array , a n d four ports are internal.
Chapter 2 24-pin PowerSupply Connector 8-pin PowerSupply Connector(+12V) +3.3V +12V +12V 5VSB P W R_OK COM +5V COM +5V COM +3.3V +3.3V COM +5V +5V +5V RESER VED COM COM COM PS_ON COM -12V +3.
Hardware Installation DJ800 Motherboard Components and Jumper Setting Primary IDE conne ctors The two 40-pin IDE connectors (pri mary a nd secondary cha nnels) support 80-conductor IDE ribbon ca bles. Connect the single conn ector end to the M ainboard.
Chapter 2 CPU/ Syste m Fan Conne ctors There are five 3-pin fa n connectors in the M ainboard. T wo fa ns are used f or CPU1 a nd CPU2; three fa ns are for system a nd front. T h ese connectors support cooling fa ns of 500mA (6W) or less. Dependin g on the fa n ma nufa cturer, the wiring a nd plug may be dif ferent.
Cha pter 3 Hardware Installation.
Chapter 3 Motherboard In stallation This section explains the ba sic requirements f or installing the motherboard in a system housing or “cha ssis”. Since housing des igns vary widely , you will need to consult the housing documentation for specific inf ormation.
Hardware Installation DJ800 Motherboard Hardware Installation IWILL DJ800 support Intel Xeon @FSB800 MHz processor . W e only recommend using the Intel Original heatsink kit. CEK (Common En a bling Kit) is speci ally designed for the Intel latest Xeon.
Chapter 3 Ste p 3— Align the processor to the socket by matching the Pin 1 corner of the socket (marked with a tria ngle) to the Pin 1 corner on the Sock et 604 (marked by a tria ngular hole in the Pin 1 corner). Ste p 4— Carefully insert the Xeon proce ssor in the socket recep ta cles, ta king care not to bend a ny pins.
Hardware Installation DJ800 Motherboard Hardware Installation Ste p 5— Lower the locking mechanism’s retaining lever a nd secur e it in pla ce to secure the proce ssor in the socket. Gr a sp the processor by t he edges a nd gently pull upwards to insure it is properly in serted .
Chapter 3 Ste p 7— Fa sten the motherboard on the cha ssis first. Then, plac e the CPU He atSink on the top, and match the he atsink, spring and motherb oard holes.
Hardware Installation DJ800 Motherboard Hardware Installation 3-6 Me mory Installation Procedure In stalling Me mory This M ainboard uses Registered DD R2 Memory with ECC or Non- ECC only . Please be aware of the dif ference between DD R a n d DD R 2.
Chapter 3 Recommended Me mory Configurations The following ste ps are our recommended DIMM installation path ba sed on the number of DIMMS being installed (Re member to check that the DIMMS are 1.8V Registered ECC or Non-ECC DD R2 DIMMs) Me mory Installation Procedure s 1.
Hardware Installation DJ800 Motherboard Hardware Installation 3-8 In stalling Expa nsion Cards 1. Remove the bra cket plate on the slot you intend to use. Keep the bra cket for possible future use. 2. Insert the PCI card into the correct slot on the M ainboard, pushing down with your thumbs evenly on both sides of the card.
Chapter 3 3-9 Powering on your Syste m Follow these instructions to power on the computer after you have installed the M ainboard a nd all system device s. 1. Be sure that all switches are off (in some syste ms, Off is ma rked by “O”). 2. After double-checking all jumper settings a nd connections, cl ose the system chassis cover .
Cha pter 4 BIOS Setup.
Chapter 4 4-1 BIOS Setup This cha pter discusses the AMIBIOS Setup progra m built into the ROM BIOS. The Setup progra m allows users to modify the ba sic syste m configuration. The BIOS is the Ba sic Input / Output System used in all IBM PC, XT , A T , a nd PS/2 compatible computers.
D J800 M o t h e r b o a r d BIOS Setup 4-2 1. Power on the System . Note: Normally , the only visible POST (Power On Self T est) rout ine is the memory te st.
Chapter 4 4-3 Using the BIOS Setup Utility Navigating through the BIOS Setup Utility is straightf orward. U se the arrow keys to highlight items, pre ss <Enter> to select item s in menus, a nd press <Esc> to quit. The following ta ble provides more deta ils a bout how to navigate in the Setup progra m using the keyboard.
D J800 M o t h e r b o a r d BIOS Setup IMPORT ANT The BIOS does NOT automatically save values that you have modified. If you do not save your values bef ore you exit the BIOS Setup Utility , all your cha nges will be lost.
Chapter 4 M ain Menu This is the first screen that is displayed when you enter the BIOS Setup Utility . Each ta b lined on the top of the screen represen ts ea ch dif ferent menu. The following picture shows the main menu. M ain menu shows the information of BIOS version, date a nd ID, processor t ype, speed a nd count, a nd system size.
D J800 M o t h e r b o a r d BIOS Setup Adva nced Menu Y ou ca n make these modifications on the Adva nced Menu. Select the Submenus to modify those settings.
Chapter 4 Boot Menu Feature D escription Boot Device Priority Specify the boot device priority sequence Hard Disk Drives Specify the boot device priority sequence from availa ble hard drives Re mova b.
D J800 M o t h e r b o a r d BIOS Setup Boot Setting Configuration Submenu Feature Option Descri ption Quick Boot Disa bled Ena bled Quiet Boot Disa bled Ena bled Force BIOS Keep Current Bootup Num-Lo.
Chapter 4 W ait for “F1” if error Disa bled Ena bled Disa bled Ena bled Interrupt 19 Ca pture Disa bled Ena bled W ait for F1 key to be pressed if error occurs Hit ‘DEL’ Message Display Displa.
D J800 M o t h e r b o a r d BIOS Setup Exit Menu Feature Descri ption Save Cha nges a nd Exit Discard Cha nges a nd Exit Discard Cha nges Loa d Opti mal Defaults Loa d Failsafe Defaults Exit system setup after saving the cha nges. F10 key ca n be used for this operation Exit system setup without saving the cha nges.
Cha pter 5 OS a nd Drivers In stallation.
D J800 M o t h e r b o a r d OS and Drivers Installation 5-1 OS In stallation DJ800 ca n be run on W indows 2000, XP , a nd Linux (SuSe64, RedHat) syste m. DJ800 supports the Intel Extended Me mory 64 bit T echnology . It ca n take the full a dva ntage of 64 bit architecture.
Chapter 5 Drivers In stallation On the motherboard pa ckage, you could find a Power installation CD. It contains the required drivers. 1. Audio Driver The audio driver for on board AD1980 chipset 2. Ada ptec 81 10 driver for the seri al-A T A devices 3.
MEMO MEMO.
MEMO MEMO.
MEMO MEMO.
An important point after buying a device IWILL Motherboard DJ800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IWILL Motherboard DJ800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IWILL Motherboard DJ800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IWILL Motherboard DJ800 you will learn all the available features of the product, as well as information on its operation. The information that you get IWILL Motherboard DJ800 will certainly help you make a decision on the purchase.
If you already are a holder of IWILL Motherboard DJ800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IWILL Motherboard DJ800.
However, one of the most important roles played by the user manual is to help in solving problems with IWILL Motherboard DJ800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IWILL Motherboard DJ800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
