Instruction/ maintenance manual of the product Jemus Jägermeister
Go to page of 28
Model JEMUS Jägermeister Tap Machine® Owner Guide The Quickest, Easiest Way To P our Colder-Than-Ice® Shots Over 17 Years of Pouring Perfection.
Dear JEMUS Jägermeister Tap Machi ne® Owner: Thank you for your purchase of the Mode l JEMUS Jägermei ster Tap Machine®, the quickest and easiest way to pour cold er-than-i ce shots while pouring on the profit s.
PLEASE READ BEFORE OPERATING TAP DISPENSER PLEASE TAKE A MOMENT NO W TO FILL OUT AND MAIL IN THE POSTAGE PAID TAP MACHINE® WARRANTY REGISTRATION FORM THAT IS INCLUDED, OR REGISTER YOUR NEW TA P MACHINE® ON LINE AT www.tapmachine.com FAILURE TO REGISTER YOUR MACHINE WILL CAUSE UNNECESSARY DELAYS IF YOU REQUIRE WARRANTY SERVICE.
T able of Content s Dear JEMUS Jägermeister Tap Machine® Owner: ....................................................... 2 Table of Contents ............................................................................................................ 4 List of Figures .
List of Figures Figure 1 - Items Supplied ................................................................................................ 12 Figure 2 - Rear View - Machine On/Off Switch and Fuse Lo cation ................................. 14 Figure 3 -Front View .
W ARNINGS AND IMPORT ANT NOTICES DANGER DANGER ELECTRICAL SHOCK HAZARD Electric Shock Hazard Can Cause Injury or Death. Before Attempting to Perform ANY Maintenance, UNPLUG Unit.
NOTICE The Jägermeister Tap Machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabiliti es, or lack of experience and knowledge, unless they have b een given supervision or instruction concerning the use of the Jägermeister Tap Machine by a person responsible for their safety.
Unpacking Your New Machine Failure to follow these simple unpacking instruction s may result in damage to your new machine. Ple ase follow these in structions ca refully. PLEASE READ BEFORE UNPACKING YOUR JÄGERMEISTER TAP MACHINE 1. Remove the foam that is protecting th e top of the machine to reveal the top of the tap machine.
From to this 3. Using the straps around the machine, lift the tap machine strai ght up and out of the box . AT NO TIME SHOULD YOU HOLD THE TAP MACHI NE BY THE FRONT FAUCET ASSEMBLY .
5. Return all packing materials to the bo x. 6. RETAIN AND STORE THE BOX IN A COOL, DRY LOCATION. YOU WILL BE REQUIRED TO USE THIS CONTAINER IF YOU MUST RETURN YOUR JEMUS JÄGERMEISTER TAP MACHINE. 7. Finally, remove any protectiv e coverings on the display panels.
Note: If You Must Return Your JEMUS Jägermeister Tap Machine® DO NOT RETURN YOUR M ACHINE UNLESS YOU RECEIVE AUTHORIZATION TO DO SO BY TAP MACHINE INC. READ THIS NOTE: SHOULD YOUR TAP MACHINE® NEED TO BE RETURNED FOR REPAIRS, IT MUST BE RETUR NED IN THE ORIGINAL BOX.
Chapter 1 What's in the Box? - Parts Supplied Check and verify that the parts sh own below are packaged with the dispenser. If any of these items are missing or to order spare p arts, Call 1-800-713-8881 or v isit www .tapmachine. com . Description Quantity 1.
Chapter 2 Key Features 1. When the power swit ch at the rear of the machine is in the “Off” position, the graphics will be the standard bla ck and white Jägerm eister Logo, but once the power switch is in the “On” position, machi ne comes to life with the internal display lighting.
Chapter 3 Locating Key Components on Y our T ap Machine Locate the Machine Serial Number The serial number tag is lo cated on the rear of the machine next to the fuse.
Figure 4 - Front View – Filer and Drip Tray A) Removable-Reusable Filter Assembly T he filter must be kept clean to allow for prop er ventilation. If the filter is clogged the machine will not be able to effectively cool the Jägermeiste r. If you notice the machine has gotten warme r over time, this is by far the most likely cause.
Chapter 4 JEMUS Setup and Operation General: The Model JEMUS Jägermeister Tap Machine® i s a unique display, refrigeration and delivery system designed to chill and dispen se Jägermeister Herbal Liqueur at temperatures well below freezing - 0º F (-18º C).
Placing the Machine on the Bar: Place the JEMUS on a flat, level surface with a MINIMUM of 1 inches of cl ear space at the rear of the unit and 1 inch MINIMUM on both side s is required to permit adequate airflow for the refriger ation system.
Bottle Stopper Insertion and Removal IMPORTANT NOTICE: WHEN REPLACING EMPTY BOTTLES - DO NOT DISCARD OR THROW THE BOTTLE STOPPERS AWAY. THE BOTTLE STOPPERS ARE TO BE REUSED AND ARE NOT DISPOSABLE! Figure 8 – Screw On Bottle Stopper Model JEMUS bottle stoppers are screw on style.
Figure 12- In Place Step 4 Slowly insert the bottle stopper into the hole of the bottle well. Push down slightly and allow the bottle to rest inside the bottle well.
Chapter 5 Plug It In, T urn It On, And Load It! 1. Unsnap the 3 p rotective dus t caps from th e bottle well ass embly located on the top of the dispenser. These caps sho uld not be removed and should be snapped in pla ce when a well space is n ot being used.
NOTE THE MACHINE WILL LOAD A TOTAL OF APPROXIMATELY 1 ½ Liters OR ABOUT 53 OUNCES OF JÄGERMEISTER. IMPORTANT INFORMATION IF THE FLOW FROM THE BOTT LES DOES NOT STOP AFTER A FEW S ECONDS (the bubbles continue and y ou may notice Jägermeister flowing all over your counter) - DO NOT CONTINUE ANY FURTHER.
Chapter 6 Keeping Y our T ap Machine® Clean WARNING THE POWER SWITCH MUST BE TURNED "OFF" DURING CLEANIN G. Figure 14 - Rear View FAILURE TO TURN THE POWER SWITCH "OFF" MAY RESULT IN INTERNAL DAMAGE TO THE MA CHINE. Your Jägermeister Tap Machin e® REQUIRES simple, regular cleaning to fun ction properly.
Monthly O n a Monthly basis clean the machine as follows: 1. Turn off the power switch at the rear of the machine. 2. Remove the bottles from the top of the unit.
Chapter 7 Let's T alk About T emperature Jägermeister - The Big Chill Warms Once a shot of Jägermeister is dispensed into a glass or other contai ner, IT BEGINS TO WARM UP IMMEDIATELY. Depending on the temperature of the g lass and the room, Jägermeister can warm up 2 0º F wit hi n se con ds .
Chapter 8 When Problems Arise Most problems can be prevented by simple we ekly and monthly maintenance describe d in "Keeping Your Jägermeister Ma chine Clean." The Jägerm eister Tap Machine ® is very reliable, however every now and ag ain so mething can go wrong.
Chapter 9 Contacting T ap Machine Inc. Before contacting Tap Machine Techni cal Support log on to www.tapmachine.com and read the FAQ section. Important Required Information: To process a request we will requi re the following information from you: 1.
JEMUS S pecifications Model Number JEMUS Dimensions 11"W x 15"D x 26"H Shipping Weight 47.8 Pounds – 21.8 Kg Power Required 115 VAC, 60Hz, 160 Watts Current Draw 3A at start / 1.4A steady state Electrical Cord 6 Ft. Compressor 1/5 HP Refrigerant / Charge Size R134A / 96.
- 28 - Limited W arranty LIMITED ONE (1) YEAR WARRANTY The JEMUS Jägermeister T ap Machine di spenser (“Dispenser”) is warranted to be free from defe cts in material and workmanship under normal .
An important point after buying a device Jägermeister Jemus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jägermeister Jemus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jägermeister Jemus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jägermeister Jemus you will learn all the available features of the product, as well as information on its operation. The information that you get Jägermeister Jemus will certainly help you make a decision on the purchase.
If you already are a holder of Jägermeister Jemus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jägermeister Jemus.
However, one of the most important roles played by the user manual is to help in solving problems with Jägermeister Jemus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jägermeister Jemus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
