Instruction/ maintenance manual of the product Steam Enclosure Jacuzzi
Go to page of 8
WHIRLPOOL BA TH R Steam Enclosure INST ALLA TION INSTRUCTIONS.
Limited W arranty and Remedy Jacuzzi Whirlpool Bath (the "Company") warrants to the original purchaser ("user"), that the enclosures and frames supplied by it shall be free from ma.
1 P ARTS LIST A. 1 BA TH TRACK B. 4 VINYL PLUGS D. 2 W ALL JAMBS E. 6 PLASTIC W ALL PLUGS F. 2 PIECES JAMB VINYL G. 2 JAMB FILLERS H. 6 #8 x 1-1/2" TRUSS HEAD SCREWS I. 1 HEADER J. 4 ROLLERS K. 4 8-32 x 3/8" HEX HEAD SCREWS L. 4 VINYL SILENCERS M.
Step 1 Measure the wall to wall opening along the center of the bath rim. Use a hacksaw to cut the bath track 1/16" short of this dimension. Note: On some installations it may be necessary to file the ends of the track to match the wall conditions.
3 Step 4 Position the wall jambs on each end of the bath track with notches in the bottom of the jambs pressed securely over the bath track. Use a level to plumb each wall jamb. Make a pencil mark on the wall through each of the holes in the wall jamb.
4 Step 7 All units are equipped with safety tee-lock jambs. When installed properly the header is permanently locked to the jambs and cannot be accidently dislodged.
5 Step 9 Peel protective backing from the four adhesive bumpers and stick to top and bottom of the panel recess in the wall jambs. Lift the interior panel into position with the rollers engaging the roller slot in the header and the bottom fin inserted into the interior slot of the bath track.
Printed in the U.S.A. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT. Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type.
An important point after buying a device Jacuzzi Steam Enclosure (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jacuzzi Steam Enclosure yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jacuzzi Steam Enclosure - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jacuzzi Steam Enclosure you will learn all the available features of the product, as well as information on its operation. The information that you get Jacuzzi Steam Enclosure will certainly help you make a decision on the purchase.
If you already are a holder of Jacuzzi Steam Enclosure, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jacuzzi Steam Enclosure.
However, one of the most important roles played by the user manual is to help in solving problems with Jacuzzi Steam Enclosure. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jacuzzi Steam Enclosure along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
