Instruction/ maintenance manual of the product GM-V42EB JVC
Go to page of 44
INSTR UCTIONS GM-V42E GM-V42EB MENU INPUT PLASMA DISPLA Y MONIT OR BEDIENUNGSANLEITUNG : PLASMABILDSCHIRM MANUEL D’INSTR UCTIONS : MONITEUR DE VISU ALISA TION PLASMA MANU ALE D’ISTRUZIONI : MONIT .
1 ENGLISH INSTR UCTIONS Model GM-V42E GM-V42EB Thank you f or purchasing this JVC Monitor . Before using the monitor , read this manual carefully so that you kno w how to use the Monitor correctly . Refer to this manual whenever questions or problems about operation arise.
2 EUR OPE EMC ST AND ARD NO TICE ■ GM-V42E W arning: This is a class A product. In a domestic environment this product ma y cause radio interf erence in which case the user may be required to tak e adequate measure.
3 ENGLISH – F or United Kingdom: This product is equipped with a three-wire plug. This plug will fit only into a grounded po wer outlet. If you are unab le to inser t the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the saf ety pur pose of the grounded plug.
4 Parts Identification Remote Control 6 MUTING button (page 14) Use this button to turn off the volume immediately . Pressing the button again will r esume the previous volume level. 7 2 / 3 / 5 / ∞ buttons Use these buttons to select menu items or make adjustments.
5 ENGLISH Monitor: Front View 1 Remote sensor/power lamp Point the front end of the wir eless remote contr ol toward here. When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode. 2 Self-diagnostic lamps (page 39) These lamps light/flash if something abnormal occurs with the Monitor .
6 Parts Identification (Continued) Monitor: Rear Views 1 RGB A input terminals (page 11) Input terminal (D-sub, 15 pin) Connect to the video output terminal of a personal computer . Note: • Use a cord as short as possible when connecting a personal computer to this terminal.
7 ENGLISH 9 VIDEO A terminals (page 12) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc. VIDEO IN terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc. VIDEO OUT terminal (BNC) Connect this terminal to the video input terminal of another Monitor , etc.
8 Preparations Checking the Accessories The following accessories are included with the Monitor . Check for them. If any item is missing, please contact the dealer wher e you purchased the Monitor . • Remote control (RM-C579) x 1 • Power cord x 2 (Use the one matching the wall outlet.
9 ENGLISH Precautions • When mounting the Monitor vertically , consult y our dealer . (See also page 13.) • When installing the Monitor , be sure to use a dedicated Stand Unit, W all Mounting Unit, or Monitor Hanger Unit, depending on a particular case.
10 Precautions • Before making connections, turn of f all the equipment. • Use a cord whose plugs ar e correctly matching for the terminals on this Monitor and the equipment. • Plugs should be firmly inserted; poor connection could cause noise. • T o unplug a cord, be sur e to grasp its plug and pull it out.
11 ENGLISH ❊ AC IN AUDIO L OUT R RGB A AUDIO IN REMOTE RS-232C WIRED MAKE POWER VIDEO DISPLAY OFF POWER RM–C579 REMOTE CONTROL UNIT ON ASPECT MUTING MENU/EXIT VOLUME A COMPO.
12 VIDEO A VIDEO IN OUT AUDIO L/MONO R VIDEO B AUDIO L/MONO R VIDEO IN Y/C IN COMPONENT/RGB B VIDEO Y/G Pb/B Pr/R HD/Cs VD AUDIO L/MONO R A V connections Connections (Continued) VCR 1 (used as the playback source) VCR 2 (used as the pla yback source) DVD player , etc.
13 ENGLISH AC IN AUDIO L OUT R RGB A AUDIO IN REMOTE RS-232C WIRED MAKE OPTION Connecting an external control unit When connecting the external control unit to the MAKE terminal, you can operate the following functions thr ough the MAKE terminal; • T urn on or off the Monitor .
14 Basic Operations Daily Operations 1 T ur n on the main power . Set POWER on the back of the Monitor to “ | (on) ” . The POWER lamp on the upper left of the fr ont panel lights orange.
15 ENGLISH Changing the Aspect Ratio Precautions for using the screen mode switching function • This Monitor features a scr een mode switching (aspect ratio change) function. If you select a mode differ ent in aspect ratio from softwar e such as TV programs, the pictur e may look differ ent from original pictur e.
16 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU Video Adjustments Adjusting the Picture Quality Picture quality can be set for each input mode. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu.
17 ENGLISH 3 Pr ess 3 to display the Size/Position Adjustment Menu. 4 Pr ess 5 / ∞ to move the cursor ( 3 ) to the item you want to adjust. Item Adjustment range H (horizontal) SIZE* 1 – 40 to +40.
18 Video Adjustments (Continued) T o make an adjustment while viewing the adjustment bar After step 3 on page 17, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “sub menu.” 2 Press 3 to display the Sub Menu. The Sub Menu for H SIZE appears on the scr een.
19 ENGLISH Adjusting the Color T emperature The adjusted setting applies to all inputs. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “ FUNCTION SELECT . ” 3 Press 3 to display the Function Selection Menu.
20 Video Adjustments (Continued) T o make an adjustment while viewing the adjustment bars After step 3 on page 19, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “ sub menu. ” 2 Press 3 to display the Sub Menu. The Sub Menu for R GAIN appears on the screen.
21 ENGLISH Changing the Aspect Ratio The setting adjusted applies to all inputs. • Y ou can change the aspect ratio by pr essing ASPECT . (See page 15.) 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “ FUNCTION SELECT .
22 Video Adjustments (Continued) 2 / 3 5 / 5 VIDEO DISPLA Y OFF PO WER RM – C579 REMOTE CONTROL UNIT ON ASPECT MUTING MENU/EXIT V OLUME A COMPO . /(RGB B) B RGB A INPUT SELECT MENU/EXIT Setting the .
23 ENGLISH Changing the Resistance of the RGB B Input T erminals Y ou can set the resistance of the two of the RGB B input terminals to either HIGH (1 k Ω ) or LOW (75 Ω ): • HD/Cs (Horizontal sync/Composite) terminal • VD (V ertical sync) terminal.
24 Other Convenient Functions Showing On-screen Display The input mode and signal type will be indicated on the screen. • Y ou can also show these information by pr essing DISPLA Y on the remote contr ol. (See page 14.) 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu.
25 ENGLISH Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i Showing the On-screen When Changing the Input Mode W ith this function, you can see the selected input mode and signal type when changing the input mode.
26 Other Convenient Functions (Continued) Prohibiting the Monitor’ s Button Operations This function allows you to prohibit the button operations on the Monitor to prevent malfunction or avoid tampering. 1 On the remote contr ol: Pr ess MENU/EXIT while holding VOLUME – to display the Setup Menu.
27 ENGLISH Setting the High-Definition Signal T ypes Y ou can select one of the High-Definition (HD) signal types through the COMPONENT/RGB B terminals — 1080i or 1035i. Normally set it to “ 1080i. ” • W ithout setting “ RGB/COMPO. ” correctly , you cannot show any picture though you select the COMPONENT input (see page 22).
28 VOLUME – VIDEO DISPLA Y OFF PO WER RM – C579 REMOTE CONTROL UNIT ON ASPECT MUTING MENU/EXIT V OLUME A COMPO . /(RGB B) B RGB A INPUT SELECT 2 / 3 5 / 5 MENU/EXIT Other Convenient Functions (Continued) Setting the Clock and the Power On/Off Timer Y ou can turn the Monitor on and of f automatically with the Power On/Off timer .
29 ENGLISH • Using the P ower On/Off Timer Select the item you want to set in step 3 in “ Setting the Clock ” (page 28) and follow the instructions below . POWER-ON SET Y ou can activate/deactivate the Power -On T imer . Press 2 / 3 to select “ ON ” or “ OFF .
30 Other Convenient Functions (Continued) Reducing the Afterimage Effect If the same image (pattern) is continuously displayed on the screen for a long time, the ar ea on the screen corr esponding to the image may vary in brightness, leaving an afterimage on the screen.
31 ENGLISH ST AR T TIME Y ou can adjust the time to activate the function. • Set the hour and minute following steps 4 to 6 in “ Setting the Clock ” (page 28). END SET Y ou can activate/deactivate the Color-Reverse Of f T imer . • Press 2 / 3 to select “ ON ” or “ OFF .
32 Checking the Timer Battery The timer clock works on the battery embedded in the Monitor . If the battery becomes weak or has already r un out, a message appears on the TIMER, COLOR-REVERSE, and REFRESH menus. When the battery becomes weak (BA TTER Y LOW) “ BA TTER Y LOW ” appears on the screen.
33 ENGLISH Resetting All the Menu Settings Y ou can r eset all the Menu settings and adjustments at a time, except the use time (HOUR METER). 1 On the remote contr ol: Pr ess MENU/EXIT while holding VOLUME – to display the Setup Menu. On the Monitor: Pr ess MENU while holding 2 to display the Setup Menu.
34 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU COLOR TEMP. ASPECT SIGNAL MODE RGB/COMPO. SYNC TERM.
35 ENGLISH PICTURE ADJ. (Picture adjustment): See page 16. CONTRAST Adjusts the contrast of the picture. BRIGHT Adjusts the brightness of the pictur e. CHROMA* 1 Adjusts the color density of the pictur e. PHASE* 2 Adjusts the color phase. SHARPNESS Adjusts the outlines of the picture.
36 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i R GAIN G GAIN B GAIN sub menu reset ADJUST: WHITE.
37 ENGLISH ST A TUS DISPLA Y : See page 25. Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs ar e switched. CONTROL LOCK: See page 26. Sets the Monitor so that it cannot be operated with the buttons on itself.
38 P ower is not supplied. P ower is suddenl y turned on or off. Video image does not appear , or audio sound does not occur . The picture becomes blurred. Color is abnormally dark or bright. Color is poor or unstable. Color is suddenly rever sed or whitened.
39 ENGLISH Self-diagnostic Indication When something abnormal occurs with the Monitor , this function informs you of the condition of the Monitor with self-diagnostic lamps, allowing for smooth service work.
40 Model name GM-V42E/GM-V42EB F rame color Silv er Screen size T ype 42 wide format Aspect ratio 16:9 (Wide format) Number of pixels displa y ed 852 (H) x 480 (V) Number of colors displa yed 16.77 million (256 colors f or each of RGB) Effectiv e screen size 93.
41 ENGLISH Model name GM-V42E/GM-V42EB COMPONENT/RGB B * COMPONENT input BNC ter minal x 3 Y : 1 V(p-p), 75 Ω P B /B-Y : 0.7 V(p-p), 75 Ω P R /R-Y : 0.7 V(p-p), 75 Ω RGB input BNC ter minal x 5 Analog RGB: R: 0.7 V(p-p), 75 Ω G: 0.7 V(p-p), 75 Ω B: 0.
42 Specifications (Continued) Pin assignment (Specifications for terminals) • Y/C terminal • RS-232C terminal This is a female type connector . Pin number Signal name 1 GND (Y) 2 GND (C) 3Y 4C Pin.
VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0204MKH-MW-VP Cover_GM_V42E&EB.p65 04.2.23, 11:21 AM 2.
An important point after buying a device JVC GM-V42EB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GM-V42EB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GM-V42EB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GM-V42EB you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GM-V42EB will certainly help you make a decision on the purchase.
If you already are a holder of JVC GM-V42EB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GM-V42EB.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GM-V42EB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GM-V42EB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
