Instruction/ maintenance manual of the product SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG JVC
Go to page of 123
BLU-RAY DISC & HDD RECORDER SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG INSTRUCTIONS STOP REV PLAY PAUSE FWD OPEN/ CLOSE ST ANDBY/ON HDV/D V IN REC REC C E R D D HB D REC MODE RESET INPUT SELECT HDD MEDIA SELECT BD/SD ONE TOUCH DUBBING .
Safety Precaution . OF ELEC TRIC SHOCK NOT OPEN DE CHOC ELECTRIQUE NE P AS OUVRIR. Cautions CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS W ARNING LABEL INSIDE OF THE UNIT This unit apply to the standard A IEC60825-1:2007 B for laser products. Dear Customer , Thank you f or purchasing the JVC BLU-RA Y DISC & HDD recorder .
. IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) K eep these instructions. 3) Heed all warnings. 4) F ollow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not bloc k any v entilation openings.
. ● Manuf actured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolb y Laboratories. ● For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc.
. WARNING : WARNING : DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT This unit apply to the standard A IEC60825-1:2007 B for laser products. Failure to heed the following precautions may result in damage to the unit, remote control or disc.
. When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
. . This equipment has been d esigned and manufactured to meet international safety standards b ut, like any electrical equipment, care must be taken if yo u are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
Contents Safety Precaution Safety Precaution ................................................................... 2 Contents Getting Started Key Features .......................................................................... 9 How to Read this Manual .
Key Features Professional Blu-ray Disc recorder of the high-definition era Copy videos to a Blu-ray Disc in high-definition from a high- definition camcorder, or down convert the videos and record them onto DVDs, all without the need for a PC. The internal hard disk drive enables for easy editing and dubbing multiple discs.
How to Read this Manual (Continued) Refer to the supplied CD-ROM for the Germany, Spanish, Italian and French GUIDEBOOK. In order to view the GUIDEBOOK, Adobe ® Acrobat ® Reader ™ or Adobe ® Reader ® must be installed. Adobe ® Reader ® can be loaded from Adobe’s web site: http://www.
m Do not make use of a power voltage other than that specified v Doing so may result in fire or electric shock. m Do not insert or remove the plug with wet hands v Doing so may result in electric shock. m Do not touch the plug when there is thunder or lightning v Doing so may cause electric shock.
SD Cards (Continued) BD video data You can erase BD Video data from the SD card as follows. 1 Insert the SD card which has BD video data stored on it, into the [SD SLOT] Memo: v The BD video data cannot be erased if the SD card is write- protected. In this case, turn off the write-protect lock before inserting the SD card.
Discs that enable both dubbing and playback Disc Type Recording Format Format Finalize Repeated Use (Reformat) BD-RE BDAV mode ü - ü BDMV mode ü - ü BD-R BDAV mode ü ü - BDMV mode ü - - DVD-RW Video mode ü ü ü VR mode ü ü ü DVD-R Video mode ü ü - VR mode ü ü - Memo: v This unit does not support the BDXL format.
Precautions on the Use of Discs Maintenance of discs v Dirt attached to the disc, such as fingerprints and dust, may cause distortion in the video image or sound. Keep the disc clean at all times such as by using a soft cloth. v Wipe the disc lightly from the center outward using the cloth.
On-screen Displays Status display Displays the current settings and operating status (such as playback, pause) of this unit. Pressing the [ON SCREEN] button on the remote control displays the status. To cancel the display, press the [ON SCREEN] button again.
Name and Function of Parts Front panel . A B C D E H R Q P O N J L G F M I K A [ A ] button Switches operation on or off. B Disc tray C [ M ] button Opens/closes the disc tray. D Display window E Remote control sensor F [RESET] switch Reset the unit. G [REC MODE] button Switches the recording mode.
Display window . A B C D A HDD/DISC remaining level display B Dubbing display C Disc status display D HDMI output display Memo: v The brightness of the display window can be adjusted. For details, refer to “DIMMER (POWER ON)” ( A page 83) . English messages appear for a number of operations.
Name and Function of Parts (Continued) Remote control . Z b c S V T W C A D d a e f g k h j m l X B U Y H I J K G O R L E F M N P Q i A [DELETE] Deletes a title or characters. B [ M ] Opens/closes the disc tray. C [HDD] For operating the HDD. D [1]-[9] For entering characters.
e [ I ] Plays the video. f [ W ] Pauses the video that is currently playing. g [ o ] Stops playback/recording. h [MARK] Adds a chapter mark during playback or recording. Select multiple titles from the playback navigation screen or other screens. i [PB MODE] Display the playback settings screen.
Connecting a Monitor To display video images from this unit, connect it to a monitor. v This unit supports connections using “HDMI cable”, “component video cable”, “S-video cable”, or “video cable”. Memo: v Switch to the appropriate monitor input according to the type of connection cable used.
Connecting an Amplifier Connecting an audio amplifier m Connecting using an optical digital cable . Memo: v Remove the protection cap of the cable before connecting. Store the protection cap properly to prevent it from being misplaced. m Connecting using an audio cable .
Connecting External Devices Connecting a wired remote control . Using a wired connection enables stable control of this unit from an external device. Operation is possible using any code (1 to 4) regardless of the remote control code settings of this unit.
Setting and Displaying Date/Time Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows. 1 Press the [SET UP] button on the remote control unit v The Settings menu screen appears.
Setting and Displaying Date/Time (Continued) 6 After setting is complete, select “ENTER”, and press the [OK] button v Doing so exits date/time setting, and returns to the initial screen. . 5'672 4'6740 1- 5'.'%6 ':+6 %.
Memo: The date display style will be applied in the following information displays. v Recording date of the title that is shown in the playback navigation screen (The recording date will be shown in place of the title if the title has not been input).
Dubbing/Importing Bi-directional dubbing between the HDD and a BD/DVD is possible using this unit alone. Also, data can be imported to the HDD from a video camera by connecting it via i.LINK or USB. Dubbing from the HDD to a BD/DVD m High-speed dubbing Select this option if you want to significantly shorten the time required for dubbing.
m Importing from a LAN-compatible device Data on devices connected to the LAN terminal can be imported to the HDD. For details, refer to “Importing Data from a LAN-compatible Device to the HDD (only for SR-HD1700)” ( A page 43) . Memo: v Videos that are copy-controlled cannot be imported.
Formatting Unused discs or SD cards may require formatting in some cases. When the need arises, format the disc or SD card accordingly. Memo: v Formatting a disc or SD card erases all existing data from the media. Double-check carefully before formatting so as not to erase important titles.
5 Select “YES”, and press the [OK] button in the format confirmation screen . %10(+4/ 6*'&+5%9+..$'(14/#66'&+0::: #.
Formatting (Continued) Formatting an SD Card 1 Insert the SD card to be formatted into the [SD SLOT] v With the terminal side facing down, insert the SD card until a “click” sound is heard. . Note: v Formatting cannot be performed if the SD card is write- protected.
Recording Modes Maximum recording time for each recording mode You can specify a recording mode according to the intended use. Setting the video to a high picture quality shortens the maximum recording time, while setting to a lower picture quality lengthens the recording time.
Recording Modes (Continued) HD picture quality v Using BD enables dubbing to be done with HD picture quality. To dub HD picture quality titles that are imported in the HDD, it is recommended to use BD. Note: v Dubbing to a DVD cannot be done in HD picture quality.
Importing Data to the HDD Using the ONE TOUCH DUBBING Button Titles can be imported to the HDD from an SD card or device connected to a USB or i.LINK terminal simply by pressing the [ONE TOUCH DUBBING] button on the unit.
Importing Data from a BD/DVD to the HDD Data can be imported from a BD/DVD to the HDD as follows. v File formats that can be imported Videos : BDMV, BDAV, AVCHD, DVD-VR, DVD- VIDEO, EverioBackup Still.
5 Select “START”, and press the [OK] button v Importing of the titles starts. v After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. . %10(+4/ &7$$+0)+5%1/2.'6'& 1- Specify a title 1 Select “SEL.
Importing Data from a BD/DVD to the HDD (Continued) 7 Select “START”, and press the [OK] button . #$% 5RQTVU %QQMKPI -+&5914.& 0GYU### 4GRQTV (.19'4.'5510 &+5% 126+10 1- 4'6740 &7$$+0) 56'2 2.
Importing Data from a USB- compatible Device to the HDD Data on devices connected to the USB terminal can be imported to the HDD as follows. v File formats that can be imported AVCHD, SD-VIDEO (JVC Ev.
Importing Data from a USB- compatible Device to the HDD (Continued) v After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. . %10(+4/ &7$$+0)+5%1/2.'6'& 1- Specify a title 1 Select “SEL.
Importing Data from an SD Card to the HDD Data can be imported from a SD (SDHC) card to the HDD as follows. v File formats that can be imported AVCHD, SD-VIDEO (JVC Everio MPEG2 TS, PS), MOV*/ MXF*, a.
Importing Data from an SD Card to the HDD (Continued) Specify a title 1 Select “SEL. TITLE(VIDEO)” in the import selection screen, and press the [OK] button v A check mark is added to the “SEL. TITLE(VIDEO)” item. 2 Select “NEXT”, and press the [OK] button .
Importing Data from an i.LINK-compatible Device to the HDD Data on devices connected to the i.LINK terminal can be imported to the HDD as follows. v Video formats that can be imported: DV and HDV content Memo: v Only titles that are not copyright-protected can be imported.
Importing Data from an i.LINK-compatible Device to the HDD (Continued) v Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE” option.
Importing Data from a LAN- compatible Device to the HDD (only for SR-HD1700) Data on devices connected to the LAN terminal can be imported to the HDD as follows. v File formats that can be imported MOV (MPEG2-TS), MXF (MPEG2-TS) v Image resolutions that can be imported (for NTSC) 1920x1080/59.
Dubbing a Title from the HDD to a BD/DVD Titles stored in the internal HDD can be dubbed to a BD/DVD as follows. Memo: v Disc types that can be used for dubbing with this unit are: BD-RE, BD-R, DVD-RW, and DVD-R. For details, refer to “Discs that enable both dubbing and playback” ( A page 13) .
Memo: v High-speed dubbing Select this option if you want to significantly shorten the time required for dubbing. Make use of a disc that supports high-speed recording. v AF/AN/AL/AE Can be selected for BD-R and BD-RE. Dubbing is done with HD picture quality.
Dubbing a Title from the HDD to a BD/DVD (Continued) v “SELECT FROM STILL PICTURES” Use a still image on the HDD for the disc menu. The largest size allowed for a still image that is used as the background is 5120 x 3840. Memo: v The background image of the disc menu can be selected (only for DVD-Video and BDMV).
Dubbing Still Images from the HDD Still images stored in the internal HDD can be dubbed to a BD-RE or an SD card as follows. Memo: v Only “JPEG” still image format is supported.
Dubbing Still Images from the HDD (Continued) 6 Select “START”, and press the [OK] button . 126+10 1- 4'6740 &7$$+0) 56'2 5'.'%656#4661$')+0&7$$+0) &7$$+0)56+..2+%674'5 07/$'41(56+.
Enabling Playback on Other Devices (Finalizing) DVD-R and DVD-RW discs may need to be finalized before they can be played on other DVD players. BD-R discs need to be finalized before they can be played on other BD players. Memo: v Discs in the Video mode becomes a DVD-Video format with a title menu after finalizing.
Enabling Playback on Other Devices (Finalizing) (Continued) ③ Select “CHANGE DISC MENU BACKGROUND” to select a background image for the top menu v You can register and use a background image of your preference. . 2CIG 126+10 1- 4'6740 2CIG (+0#.
Copying the Entire Disc Copying the entire disc allows all contents on a BD (BDAV, BDMV) or DVD (AVCHD, DVD-Video, DVD-VR) to be copied onto another disc. Note: v Contents on a DVD-VR that is not finalized cannot be copied to other discs. v Content cannot be copied to a formatted BD-R or DVD-R disc.
Copying the Entire Disc (Continued) 8 Select “START”, and press the [OK] button . 126+10 1- 4'6740 &7$$+0) 56'2 %#0%'. ':+6 5'.
Direct recording to discs The video from the external device can be recorded to the optical disc directly. 1 Press the [BD/SD] button on either this unit or the remote control to specify the “BD” .
Recording Using External Inputs (Continued) m RECORDABLE MEDIA RECORDING MODE RECORDABLE MEDIA HDD DVD-R/RW (VR Format/Video Format) BD-R/RE (BDAV format) BD-R/RE (BDMV Format) DR HDV - HDV - AF (HD) .
About Playing Back Videos or edited videos stored on the internal HDD, as well as videos stored on a disc or SD card can be played back on this unit. The types of media that are playable on this unit are as follows.
Using Playback Navigation (Continued) m Switching between thumbnail and list displays You can switch between the thumbnail display and list display of a video. v When the video thumbnail list screen is displayed . 001 002 003 004 006 005 007 008 2CIG VKVNG OKP 0#8+)#6+10 126+10 4'6740 1- )4172 2+%674' .
2 Select an operation option, and press the [OK] button v Options that cannot be operated are displayed in gray and cannot be selected. For details on the Option menu items, refer to “Option menu list” ( A page 57) . Option menu list v BACK Returns to the previous screen.
Video Playback Operation . Frequently used button operations m [ I ] button v If the stop position (resume point) is memorized in the selected video, pressing the button plays back the video from this position. The video may not resume playback depending on the media and settings used.
m [ v ] button v During normal playback, 1.3x playback, slow motion playback, fast forward, or fast reverse, pressing the button moves the playback position forward by about 30 seconds. Pressing the button multiple times moves playback to the position equivalent to the number of times pressed multiplied by 30 seconds.
Playing Videos on a BD/DVD Playback starts automatically after a BD/DVD is set. If the Auto Play feature is disabled, play the title using Playback Navigation. Memo: v For details on the button operations during playback, refer to “Video Playback Operation” ( A page 58) .
Playing Videos on the HDD Titles stored on the HDD can be played back using Playback Navigation. You can select a video to play from “Title”, “Group”, or “Playlist”. Memo: v For details on the button operations during playback, refer to “Video Playback Operation” ( A page 58) .
Playing Still Images (JPEG) Still images stored on the HDD/BD/DVD/SD card can be played back using Playback Navigation. Playing still images 1 Select the playback location HDD : If the current playback location is “BD/DVD” or “SD CARD”, press the [HDD] button on the remote control unit to switch it to “HDD”.
Changing Playback Settings Displaying the playback settings menu 1 Press the [PB MODE] button on the remote control unit during the playback of a title v The Settings Menu screen appears. v The playback settings menu can only be displayed during the playback of a title.
Playback Settings Menu (Continued) Video settings . 8+&'15'66+0) 2+%674'37#.+6; 014/#. &+)+6#.01+5'4'&7%6+10 1(( 241)4'55+8'176276 #761 m PICTURE QUALITY The following items can be set. Setting Values Description NORMAL Standard picture quality.
Editing Before editing This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing them to the HDD. Data on a finalized disc cannot be edited. To edit a finalized disc, you have to either unfinalize the disc, or do so after importing the data to the HDD.
Entering Characters Names can be changed or given to stored videos or groups. You can enter characters while referring to the input on the monitor. Character input screen . ! CDE IJK LMN OPQ RSTU VWX YZ[ FGH 2#)'248 2#)'0':6 126+10 1- 4'6740 4'0#/'6+6.
Character List . ) æ é ì 5 ø S ú Z ! @ å ê í ò ÿ û ý ? / à ë î ó ß ü þ ~ : á ð ï ô $ Ù Ý ( _ â È Ì õ 7 Ú Þ ) ã É Í ñ Û 9 * ç Ê Î Ö Ü # Ä Ë Ï Ø 8 + Æ Ð 4 Ò , Å 3 Ó ^ À Ô ; Á Õ < Â Ñ = Ã 6 > Ç $ 2 > %& [ ] ' ` {|} *1 [1] [2] [3] [4] [5] [6] [7] [8] [9] [0] [*] .
Grouping Multiple titles stored on the HDD can be combined into a group. Memo: v Only video data stored on the HDD can be grouped. Grouping 1 Press the [NAVIGATION] button on the remote control unit v The Playback Navigation screen appears.
4 Select “YES”, and press the [OK] button v All titles within the selected group are ungrouped. . 2CIG OKP 0#8+)#6+10 126+10 4'6740 1- )4172 2+%674' .+56 5'.'%6 ':+6 0':62) 24'82) )4172 4'/#+0+0)4'%14&+0)6+/':2 2+%674' 8+&'1 6+6.
Changing the Title/Group Name The saved title/group name can be changed as follows. Memo: v A title/group name can be added to video data stored on the HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the name can be changed. v For video data stored on a DVD-RW or DVD-R in the Video mode, the title/group name cannot be changed.
Turning On Title/Group Protection Titles/groups can be protected. Editing and deletion cannot be performed on protected titles/ groups. v Title/group protection can be turned on for video data stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and DVD-RW (VR).
Turning Off Title/Group Protection Protection of a title/group can be turned off. Titles/groups can be edited and deleted after their protection is turned off. v Title/group protection can be turned off for video data stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and DVD-RW (VR).
Creating a Playlist A playlist can be created from the video titles on the HDD. v Playlists can only be created for titles that are stored on the HDD. Playlist : Enables you to create a program by selecting chapters from a specific title and editing their playback sequence.
Editing a Thumbnail Thumbnails (index images) can be changed to a still image according to your preference. Memo: v Thumbnails of titles stored on the HDD, BD-RE, BD-R, DVD-RW, and DVD-R can be edited. v However, thumbnails of titles that are stored on an SD card or finalized disc cannot be edited.
Editing a Chapter Creating a chapter mark for a saved title enables you to find a specific scene within the title. Memo: v All chapter editing functions can be performed on titles stored on the HDD. Titles stored on a BD-RE (BDAV), BD-R (BDAV), DVD-R (VR), or DVD-RW (VR) only allow chapters to be divided or combined.
Editing a Chapter (Continued) m Chapter mark insertion (divide chapter) 1 Play the video, and press the [ W ] button to stop at the scene you want to add a chapter mark 2 Press the [MARK] button on the remote control unit v A chapter mark is inserted into the paused scene.
Dividing You can select a saved title and divide it into two titles. Memo: v Dividing can only be applied to titles stored on the HDD. v Titles that are protected cannot be divided. To divide a title, turn off the protection. For details on turning off the title protection, refer to “Turning Off Title/Group Protection” ( A page 72) .
Dividing (Continued) Memo: v To cancel the dividing operation, select “CANCEL” and press the [OK] button. v Alternatively, you can press the [RETURN] button to cancel the divide operation and return to the initial screen. v The dividing edit screen can also be called up from the Playback Navigation screen.
① Play the video, and press the [ W ] button at the point where you want to start the delete operation ② Select “START”, and press the [OK] button . - : -- : -- - : -- : -- 126+10 1- 4'6740 &'.'6'5%'0' ;17%#0&'.
Changing the Disc Name The name of a BD or DVD disc can be changed as follows. 1 Set the BD or DVD for which the disc name is to be changed on the disc tray 2 Press the [MEDIA MANAGE] button on the remote control unit v The Media Management menu screen appears.
5 Select “ENTER”, and press the [OK] button v The modified shooting date/time is saved. Memo: v Alternatively, you can press the [RETURN] button to cancel the shooting date/time modification and return to the initial screen. v The shooting date/time modification will not be reflected on a title that was dubbed.
Changing Settings of this Unit Settings changed in the Settings Menu screen are stored on this unit even when its power is turned off. Displaying the Settings Menu 1 Press the [SET UP] button on the remote control unit v The Settings Menu screen appears.
SETUP . 5'672 4'6740 1- 5'.'%6 ':+6 &'(#7.65'66+0) $7<<'4176276 1(( 37+%-56#4672 2#0'.&+52.#;$4+)*60'55 %.1%-5'6&+52.#; 4'/16'%10641. 4'/16'%10641.
Setting Menu List (Continued) m QUICK STARTUP For turning on/off the display window during quick startup and standby mode. Setting Values Description OFF Starts up in the normal way. Display window turns off during standby mode. ON Operation is speedily enabled after turning on the power.
m RESUME The stop position can be stored when playback of a BD- Video, DVD-Video, BDMV, AVCHD, finalized discs, or SD card is stopped halfway. Setting Values Description OFF Resume information is not stored. ON Stores resume information. Memo: v Resume information is stored at all times for other discs as well as the HDD regardless of this setting.
Setting Menu List (Continued) v DISC RECORDING AUDIO For changing the settings of audio to be recorded to the disc when in the AF, AN, AE or AL mode. Setting Values Description AUTO Records “Stereo”, “Surround” or “Dual broadcast” audio sounds as they are.
m DIGITAL OUT Set this item according to the device connected to the digital audio output terminal (optical digital). v PCM DOWN SAMPLING For specifying settings on sampling frequency conversion. Setting Values Description OFF Sampling frequency is not converted.
Setting Menu List (Continued) DISPLAY . 5'672 4'6740 1- 5'.'%6 ':+6 '0).+5* 15&.#0)7#)' 10 5%4''05#8'4 10 $.7'$#%- #761 105%4''0)7+&' &+52.#; m ON SCREEN GUIDE For displaying operation details.
v HDMI OUTPUT RESOLUTION Setting Values Description AUTO Automatically selects an appropriate resolution according to the connected device. 480p (NTSC) 576p (PAL) Fixes the resolution at 480p or 576p. 1080i Fixes the resolution at 1080i. 720p Fixes the resolution at 720p.
Setting Menu List (Continued) m COMPONENT OUTPUT For setting the resolution of video output from the [COMPONENT VIDEO OUT] terminal. Setting Values Description 480i (NTSC) 576i (PAL) Sets output to “480i” or “576i”. 480p (NTSC) 576p (PAL) Sets output to “480p” or “576p”.
Locking the Disc Tray By turning on the lock for the disc tray, the tray cannot be opened or closed using the [ M ] button. Memo: v When the [ M ] button is pressed while the disc tray lock is turned on, a “LOCKED” message will appear on the display window of the unit for about three seconds.
External Control (only for SR-HD1700) This unit can be controlled using a PC, etc. by connecting them with an RS-232C or LAN cable. RS-232C Specifications v Pin layout .
Command Table . 0123456789 A B C D EF 0 1 2 3 4 5 6 7 8 9 A B C D E F Higher Order Low er Order Title Sense Sense Chapter Clear Still Stop Play NAK ACK Not Read y Not Ta r g e t Cassette Out Error Com.
External Control (only for SR-HD1700) (Continued) Command m Operation Commands Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER Command Description 3A Plays the selected deck. 3F Stops the selected deck. Resume will be cleared when this is pressed while in the Stop mode.
CA Rec: Starts recording at the selected deck when a Rec Request is received. F0 Command Target: F0 h 34: For selecting HDD deck. F0 h 38: For selecting BD deck. F0 h 3C: For selecting SD deck. FA Rec/Dub Request: For issuing approval for recording. This can be cleared using “Stop”.
External Control (only for SR-HD1700) (Continued) 9F 9F : Remote Data The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes apply to all three HDD, BD and SD deck unless otherwise stated.
CC REC D3 OPTION D4 RETURN D5 COLOR KEY BLUE D7 COLOR KEY RED D9 JOG -1/6 DA JOG +1/6 DB JOG +1 DC INSTANT REPLAY DD EDIT DE COLOR KEY GREEN DF COLOR KEY YELLOW E0 NAVIGATION E1 L-1 Y/C INPUT SELECT HDD Deck only E2 L-1 COMPOSITE INPUT SELECT HDD Deck only E3 PLAYBACK SETTING E4 DELETE E5 INFORMATION CORRECT ED FWD FRAME F2 MODE LOCK F3 HDCP AUTO .
External Control (only for SR-HD1700) (Continued) Subtitle Selection B8 : Subtitle Selection 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte OFF 3C 10 EL 3C 31 LO 3C 56 SL 3C 7.
Audio Language Selection B8 : Audio Language Selection 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte JAPANESE 39 11 EO 39 32 LT 39 57 SM 39 79 ENGLISH 39 12 ET 39 33 LV 39 58.
External Control (only for SR-HD1700) (Continued) Response Commands RS-232C commands send from the deck. Command Description 01 Complete: Issued by the external recorder upon completing all specified operations by commands. 02 Error: Issued by the external recorder when receiving invalid commands in the context.
v Title/Track Sense under “ORIGINAL” 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (ORIGINAL) 30 Hundreds Tens Ones 61 30 3* 3* 3* E.g. (345) 30 33 34 35 E.
External Control (only for SR-HD1700) (Continued) v Status Data Sense For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/BD/SD.
v SEARCH SPEED bit3 bit2 bit1 bit0 STILL 0 0 0 0 x1 0 1 0 1 x1.3 1 0 1 0 SLOW1 0 0 0 1 SLOW2 0 0 1 0 SLOW3 0 0 1 1 SLOW4 0 1 0 0 SEARCH1 0 1 1 0 SEARCH2 0 1 1 1 SEARCH3 1 0 0 0 SEARCH4 1 0 0 1 SEARCH5 1 0 0 1 v CTL Data Sense For acquiring lapse counter of selected deck in hours, minutes and seconds.
Language Code List Code Language Code Language Code Language AA Afar HI Hindi OS Ossetian AB Abkhazian HO Hiri Motu PA Panjabi AF Afrikaans HU Hungarian FA Persian AK Akan IG Igbo PI Pali SQ Albanian .
DV Divehi LU Luba-Katanga TL Tagalog NL Dutch LG Ganda TH Thai DZ Dzongkha MK Macedonian BO Tibetan EN English MH Marshallese TI Tigrinya EO Esperanto ML Malayalam TO Tongan ET Estonian MI M ā ori TN.
Country Code List Code Country Name Code Country Name Code Country Name AD Andorra GM Gambia NU Niue AE United Arab Emirates GN Guinea NZ New Zealand AF Afghanistan GP Guadeloupe OM Oman AG Antigua an.
CK Cook Islands LC Saint Lucia TD Chad CL Chile LI Liechtenstein TF French Southern Territories CM Cameroon LK Sri Lanka TG Togo CN China LR Liberia TH Thailand CO Colombia LS Lesotho TJ Tajikistan CR.
Using the HDMI Consumer Electronics Control (HDMI CEC) HDMI Consumer Electronics Control v By using an HDMI cable to connect this unit with a TV that supports the HDMI CEC standard, this unit and the TV can be linked and operated together.
Troubleshooting Problem Symptom Action Reference Page Power does not turn on The “HELLO” message remains displayed, and the unit does not start up. Press the [RESET] button on the front panel. If it does not start up, stop using this unit, unplug the plug from the outlet, and bring it to the dealer or Service Center.
Troubleshooting (Continued) Problem Symptom Action Reference Page Dubbing cannot be performed “NEXT” cannot be selected when a title that cannot be dubbed is chosen. v Dubbing may start when you return to recording mode selection to change the recording mode.
Problem Symptom Action Reference Page The remote control unit does not work The battery of the remote control unit has run out. Change new batteries for the remote control. ( A page 19) The remote control code of this unit and the remote control unit are different from each other.
Frequently Asked Questions on Dubbing Problem Symptom Cause Action Reference Page Unable to dub from HDD “SOME TITLES CANNOT BE DUBBED” is displayed. v Titles that cannot be dubbed at high speed are selected after “HIGH-SPEED DUBBING” has been selected at the recording mode selection.
Memo: When “SOME TITLES CANNOT BE DUBBED” appears after selecting high-speed dubbing, check the followings. v Titles that are copyright-protected cannot be dubbed. v Titles that are recorded in a recording mode that does not support high-speed dubbing cannot be dubbed.
Specifications m General Power requirement SR-HD1700US/SR-HD1350US: AC 120 V H , 60 Hz SR-HD1700EU/SR-HD1350EU/SR-HD1700ER/ SR-HD1700AG: AC 220 V - 240 V H , 50 Hz / 60 Hz Power consumption Power on : 36 W Power off : 0.
B5A-0170-0 0 ● Direct reco rding in D VD- Video forma t to a single-sided, dual lay er DVD-R disc is not allo wed. Direct recor ding in D VD- Video format to a single-sided, single lay er DVD-R disc is allow ed.
● Les fichiers MO V édités sur et e xportés depuis Final Cut Pro ne sont pas pris en charge. ● L ’entrée SDI est mentionnée dans le manuel d’instruction ; cependant il n’y a pas d’entrée SD I sur cet appar eil.
● W enn Sie die FTP-Übertragung mit mehreren ausge wählten Dat eien ausführen, w erden die Da teien möglicherweise nicht ordnungsgemäß importiert.
. So f tware License Attached to the Product The Software embedded in the Pr oduct is composed of several independent software components, and in each of such individual components, a copyright of either JVC KENWOOD or a third party subsists.
. Activities other than copying, distribution and modication are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
Index A AACS ........................................................................... 10 AUDIO CABLE ................................................ 17, 21, 20 AUDIO LANGUAGE ........................................ 63, 84, 99 AUDIO/SUBTITLE SETTINGS .
SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG BLU-RAY DISC & HDD RECORDER LST1562-001A © 2014 JVC KENWOOD Corporation.
An important point after buying a device JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG you will learn all the available features of the product, as well as information on its operation. The information that you get JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG will certainly help you make a decision on the purchase.
If you already are a holder of JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG.
However, one of the most important roles played by the user manual is to help in solving problems with JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC SR-HD1700US/SR-HD1350US/ SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
