Instruction/ maintenance manual of the product SS-2 Anderson Manufacturing
Go to page of 4
SS-2 Assembly, U s e a n d Care Th a n k Yo u! Y ou have purchased the highest quality professional drop spreader available on the market today . The SS-2 is the accumulated refinement of proven performance and will provide you with years of trouble-free service.
Remove spreader and components from carton. Place hopper on its front panel, insert two 1/4-20 X 1/2” hex head bolts through the leg; flattened end of handle brace and holes in hopper as shown. Install hex locknuts but do not tighten . Repeat on opposite side.
Operation 1) Before filling hopper , make sure spread- er handle lever is in the “ OFF ” position. Always fill spreader on sidewalk or drive, not on the lawn. 2 ) Loosen rate control knobs and move the tie bar to setting recommended for the product applied.
Par ts Diagram - SS-2 Or dering Par ts Extra parts may be obtained at current prices. When ordering parts, be sure to include: 1) Spreader model number (AGC8008-1) 2) Spreader model name (SS-2) 3) Part number 4) Description of part (refer to list) Call 1-614-559-2705 to order parts.
An important point after buying a device Anderson Manufacturing SS-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anderson Manufacturing SS-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anderson Manufacturing SS-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anderson Manufacturing SS-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Anderson Manufacturing SS-2 will certainly help you make a decision on the purchase.
If you already are a holder of Anderson Manufacturing SS-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anderson Manufacturing SS-2.
However, one of the most important roles played by the user manual is to help in solving problems with Anderson Manufacturing SS-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anderson Manufacturing SS-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
