Instruction/ maintenance manual of the product KI50SDW Kelvinator
Go to page of 8
.
1.Name of parts 1.Name of parts 1 PARTS AND FEA TURES PARTS AND FEA TURES Cabinet Cabinet Shelf Shelf Hinge Cover Hinge Cover Door Door Evaporator Evaporator Thermostat Knob (at the rear) Thermostat K.
2.Correctly positioning 2.Correctly positioning ¡À ¡À ¡À ¡À N N Well Ventilating Power Supply Supply Cord Protection from Moisture It is necessary of good ventilation around the refrigerator for easy heat dissipation , high efficiency of refrigeration and low power consumption.
2.Correctly Positioning 2.Correctly Positioning Protection from Heat Stable Fixing Keep Away from Danger Moving Floor on which refrigerator will be placed on must be flat and solid. It should not be layed on any soft material such as foam plastic, etc.
4 4 Water contained in food or moisture in the air getting inside the refrigerator by opening doors may form a layer of frost inside, It will weaken the refrigerator when the frost is thick, Therefore you should defrost manually when the ice is thick.
5 5 4.Changing the reversible door 4.Changing the reversible door Before Reversing the door ,the power must be shut off. All parts removed must be saved to do the reinstallation of the door. NOTE: This refrigerator has the capability of either opening the door from the left or right side.
6 6 The refrigerator should be cleaned and maintained once a month. When performing maintenance, make absolutely sure that the power plug is first disconnected from the power outlet. Wipe the inner and outer surface of the refrigerator and its accessories with wet cloth.
7 6. Troubleshooting Check if there is a power failure. Check if the power plug is plugged into the power outlet. Check that the fuse has not blown. 1.
An important point after buying a device Kelvinator KI50SDW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kelvinator KI50SDW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kelvinator KI50SDW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kelvinator KI50SDW you will learn all the available features of the product, as well as information on its operation. The information that you get Kelvinator KI50SDW will certainly help you make a decision on the purchase.
If you already are a holder of Kelvinator KI50SDW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kelvinator KI50SDW.
However, one of the most important roles played by the user manual is to help in solving problems with Kelvinator KI50SDW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kelvinator KI50SDW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
