Instruction/ maintenance manual of the product MX-5000 Kenwood
Go to page of 8
User’ s Guide MX-5000 R E I F I L P M A R E W O P B60-5163-08 01 KO (K) CR 0103.
2 EN Introduction Thank you for selecting our power amplifier as part of your high-fidelity system. We at KENWOOD are confident that your choice will bring you years of rich listening pleasure. Please take the time to read through this booklet carefully .
3 EN Installation 7 Notes on heat generation • This unit incorporates a ventilation fan to process heat generated during operation. As the fan starts to rotate automatically when the internal temperature of this unit rises, avoid installing or setting which may prevent ventilation of the unit.
4 EN 7 2-Channel stereo configuration This is the ‘standard’ stereo operation mode, with the amplifier driving 2 speakers in stereo (such as the Surround Back Left and Surround Back Right speakers in a THX Surround EX ® home the- ater system). The amplifier delivers its rated stereo power out- put into each speaker .
5 EN 7 Mono (bridged, or BTL) configuration In this configuration, the MX-5000’ s two individual channels op- erate together to drive a single speaker (such as a subwoofer) in mono. This allows the amplifier to deliver more than double the power of one of its channels to the speaker .
6 EN.
7 EN Controls and indicators This unit has the following switch and indicators. The power indicator and the ST ANDBY indicator will let you know the status of this unit. POWER switch Press to turn the power ON/OFF . ST ANDBY indicator* Lights when this unit is in Standby mode.
8 EN Specifications For your records Record the serial number , found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below . Refer to the model and serial numbers when- ever you call upon your dealer for information or service on this product.
An important point after buying a device Kenwood MX-5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood MX-5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood MX-5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood MX-5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood MX-5000 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood MX-5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood MX-5000.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood MX-5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood MX-5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center