Instruction/ maintenance manual of the product KBS300RX Krown Manufacturing
Go to page of 20
INSTR UCTION MANU AL KA300TX / KA300RX / KBS300RX Alar m Monitor KA300TX / KA300RX / KBS300RX Alar m Monitor PA TENT PENDING.
Important W arranty Compu-TTY , Inc. warrants that the Alarm Monitor sold by Compu-TTY , Inc. is free from defects in materials and workmanship under normal use and service for one year .
CONTENTS i. Introduction ......................................................................................ii ii. KA300 System...................................................................................1 1. How your Alarm Monitor KA300 W orks .
i. INTRODUCTION The alarm Monitor KA300 is developed to bridge the gap created by the existing warning devices designed only for the hearing. It provides a totally reliable source for the Deaf and Har.
ii. KA300 SYSTEM KA300RX receiver KBS300RX with bed shaker KA300TX KW A300TX STROBE ADAPTER INDICA TOR BA TTERY LOW INDICA TOR LOUDSPEAKER MODE SELECTOR CHANNEL LEDS PROGRAM OP/LOW BA TTERY RESET SHAKER OPERT A TION OP .
ALARM MONIT OR KA300 WORKS KA300system is designed to monitor all existing acoustic alarm units in your living area and transfer it to a visual and vibration alarm. It will quickly help you to determine what source triggered the alarm and give you enough time to evacuate from the building or to locate a shelter .
Example: There are 4 smoke alarms and 3 Carbon Monoxide alarms that need to be monitor in your household. Y ou will need seven KA300TX transmitters. All seven transmitters will be set at the same oper.
Keep the battery installed and turn the power switch to OFF before bringing it to the location. Mark on the given label for channel location as fire, mono-carbon, or weather alert and coordinate them with the installed transmitters. This label is available only for the KA300RX.
INST ALL KA300 FOR MUL TI-F AMIL Y HOME OR HOTEL There is one hotel code applied for all KA300TX installed in the hallway . The room code is applied for each KA300TX in each room. W ith this set up, when there is an alarm triggered from a local fire alarm, the KA300RX receiver and KBS300RX will activate with channel one LED indicator .
KA300TX Uses 3VDC, CR2032 battery and it will be installed by the manufacturer . KA300RX Uses alkaline 9V battery . Do not use rechar geable batteries.
The operation code is set by DIP-switches located in the front of the KA300TX trans- mitter , and they are preset at the factory . If your KA300RX receiver does not respond to your KA300TX transmitter signal when the test button is pressed, or it activates from a false signal of a neighboring KA300 system, you need to change the operation code.
MOUNTING THE KA300TX ON THE EXISTING ALARM Use the self adhesive V elcro to attach the KA300TX to the siren of the existing alarm unit. Do not block the window of the smoke chamber or on top of the alarm sensor . KA300RX RECEIVER The alarm monitor KX300RX is designed to learn the operation code from your trans- mitter and program it to the memory .
MOUNTING THE KA300RX ON THE W ALL The adapter of the KA300 is supplied with a nine feet line cord for installation to a normal outlet box. KBS300RX BED SHAKER RECEIVER: The bed shaker KBS300RX is a receiver . It needs to be programmed like the KA300RX before you can actually use it in the system.
BED SHAKER LED INDICA TOR 1 Main LED: • T urns ON when there is a channel triggered by an alarm in the system. • Low flashing when there is AC power failure. • Fast flashing for battery low warning. It needs to be recharged soon. 2 Channel indicator LEDs: • T urns ON to indicate the corresponding channel has triggered the receiver .
KA300TX T ransmitter, program the KA300RX with one KA300TX. • Install the KA300TX on the existing sensors and KA300RX on the wall. • Perform a test on each KA300TX, USING ALARM MONITOR WITH WEA THER ALERT RADIO. • Set operation code for the KW A300TX (weather alert transmitter).
TESTING It is important to perform a test for your alarm system at least once a month to make sure the system is operating properly . Y ou are responsible for your family safety from fires, and any other possible disasters. Repair or replace your Alarm Monitor , and all other alarm systems when they no longer function.
TROUBLESHOOTING: If any question should arise during the installation and testing, follow through the fre- quently asked questions below . Contact CompuTTY or your authorized dealer if you should have any more questions that these F AQs do not answer .
W orking Frequency.......................................................................................433MHz T ransmitter codes ................................................................................................1024 Receiver Memories .
.
3408 Indale Road, Fort W orth, TX 761 16 V oice or TTY : (817) 738-2485 or (817) 738-8993 Fax: (817) 738-1970 E-mail: info@computty .com ORDERS: (800) 366-9950 www .
An important point after buying a device Krown Manufacturing KBS300RX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krown Manufacturing KBS300RX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krown Manufacturing KBS300RX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krown Manufacturing KBS300RX you will learn all the available features of the product, as well as information on its operation. The information that you get Krown Manufacturing KBS300RX will certainly help you make a decision on the purchase.
If you already are a holder of Krown Manufacturing KBS300RX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krown Manufacturing KBS300RX.
However, one of the most important roles played by the user manual is to help in solving problems with Krown Manufacturing KBS300RX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krown Manufacturing KBS300RX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
