Instruction/ maintenance manual of the product 1024X768 XGA LG
Go to page of 29
DLP PR OJECTOR USER’S GUIDE Thank you for purchasing the DLP Projector. Please read this u ser’s guide to ensur e correct use of the device . Save this user’s guide for future reference. OUTLINE This DLP Projector can display various co mputer signals and NTSC/PAL/SECAM video signals.
Copyright Copyright © 2003. All rights rese rved. No pa rt of thi s publication ma y be reproduced, transmitted, tra nscribed, stored in a retrie val system or translated into any language or compute.
T able of Contents iii DLP Personal Projector Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FCC Statement .
iv DLP Personal Projector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 23 Projector Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Timing Chart . . . . . . . . . . . . . . . .
DLP Personal Projector 1 INTRODUCTION Caution T O PREVENT SHOCK, DO NOT OPEN THE CABINET . NO USER –SER- VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. PLEAS E READ THIS USER’S GUIDE BEFORE YOU OPER- A TE YOUR PROJECTO R.
2 DLP Personal Projector Caution • Always open the lens shutter wh en the projecto r lamp is on. • Do not look strai ght at the proj ector lens during ope ration. The intense light beam m ay damage your eyes. • In some co untries, the li ne volt ag e is NOT st able.
DLP Personal Projector 3 Shipping Content s The Projector is shipped wi th the cables required for connection to standard PC or laptop computers. Carefully unpack and verify that you h ave all the items shown below . If any of these items are missing , please contact personnel at th e place of purchase.
4 DLP Personal Projector Projector Description Projector DC 12V , 0.5A Max. power supply PC/ HD (YP B P R ) connector USB MOUSE connector VIDEO connector S-VIDEO connector IR remote sensor Kensington .
DLP Personal Projector 5 External Control Panel POWER SOURCE AUTO BLANK Lamp indicator SOURCE BLANK Power indicator POWER AUTO Power indicator The indicator sh ows green for a normal state. When the projector i s operated improperly , it shows green or orange toggle.
6 DLP Personal Projector Adjuster The projector is equipped wi th 1 quick-re lease adjuster foot. Push the button to adjust its tilt angle. 1. Lift the projector up and press the adjuster button to relea se the adjuster . 2. The adjuster will drop into position and be locked.
DLP Personal Projector 7 Remote Control Description The remote control sensors are located in the front/ ba ck of the projector . POWER S OURCE S elects signal sources f rom among PC, VIDEO, S -VIDEO and YP B P R . L-Mouse/ R-Mouse Serves as a left/ right click button of a mouse when the remote mouse function is activated.
8 DLP Personal Projector MOUSE DRAG When the remote control works as a mouse, choose your desired item and press MOUSE DRAG . Drag it to wherever you want on the projection image and press MOUSE LEFT to release the item. STIL L Makes the projection image still.
DLP Personal Projector 9 Inst alling or Replacing Batteries (“AA” type) Caution A voi d excessive heat and humidity . There may be danger of an exp losion if batteries are incorrectly rep laced. Replace only with the same or equiv- alent type rec ommended by the manu facturer .
10 DLP Personal Projector INST ALLATION Display Size Place the projector at the required distance from the screen according to the desired picture size (see the table bel ow). The effective display size is from 26 to 178 inches diagona lly for RD-JT31 and from 33 to 228 inches dia gonally for RD- JT30.
DLP Personal Projector 11 Connecting to V arious Equipment HDTV description The projector is capable of displaying various High Definiti on TV display modes. Some of these sources are: Most of these sources will provide an analog component vid eo output, a standard VGA output, or a YP B P R (default) format.
12 DLP Personal Projector OPERATION Star t U p 1. Plug the power cord into a wall socket. Open the front Door to Po wer ON. 2. When plugging-in, the ORANGE Leds light. Press the Power button to turn on the projector . Then, the fan will star t to operate while the ORANGE Led is blinking.
DLP Personal Projector 13 Digit al Key stone Correction Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. T o correct this, press KEYST ONE ▲ / ▼ (hot key) on the remote contro l, and then adjust the sliding ba r labeled Keystone, as needed.
14 DLP Personal Projector Source Selection When several input sources are available, press the SOURCE key to make a selection from the con trol panel of t he projecto r or the remote control. Menu System Press Menu for the main menu, an d then press Joystick to select a sub-menu.
DLP Personal Projector 15 1. VIDEO Menu FUNCTION DESCRIPTI ON Contrast Adjusts the degree of difference between dark and light in the image. Brightness Adjusts the brightness of the image. Color Increases or decreases the color range of the image. *This function is not available when the input mod e is PC.
16 DLP Personal Projector 2. POSITION Menu FUNCTION DESCRIPTION Horizontal Adjusts the horizontal positi on of the projected image. Ve r t i c a l Adjusts the vertical posito n of the projected image. Keystone Corrects any keystoning of the image. Zoom Activates Zoom function.
DLP Personal Projector 17 3. SPECIAL Menu FUNCTION DESCRIPTION Source It’ s the same function with the SOURCE button on the remote control. Language Language sets the language for the OSD control menus.
18 DLP Personal Projector 4. TRACKING Menu This sub-menu only works in PC mode. FUNCTION DESCRIPTION Auto T racking It’s the same function with the AUTO button on the remote control. Clock Adjusts to fit in the desired image size. Phase Adjusts to avoid the occurrence of flicker .
DLP Personal Projector 19 Shut down 1. Press POWER and a warning message will appear . T o turn of f the projector , press POWER again. 2. T o cool dow n the projector , the fan w ill continue to run for approximately 90 seconds, during which the LED will fl ash.
20 DLP Personal Projector MAINTENANCE Lamp Information Use and Replacement of the Lamp The lamp life is 1500 hours. When the Power Indicator lig hts up red and the Lamp Indicator lights up orange or a message appears suggesting the time of lamp replacem ent, please install a new lamp or consult your dealer .
DLP Personal Projector 21 Operative Information When th e two LED light up , they are warn ing you of the following p ossible problems: St ate LEDs Di splay Description Operation LED S t atus LED Normal Green No col or Projector runs as No rmal S tate.
22 DLP Personal Projector T ROUBLESHOOTING Common Problems & Solutions S t atus Messages PROBLEMS TR Y THESE SOLUTIONS NO POWER • Make sure the power cord is inserted snuged into the AC adapter socket. • Make sure the power cord is inserted snuged into the power outlet.
DLP Personal Projector 23 S PECIFICATIONS Projector S pecifications T echnical S pecifications Note: All specifications are subject to change witho ut notice. General Product name Personal Projector Model name RD-JT30 1024X768 XGA RD-JT31 800X600 SVGA Optical Display system 1-CHIP DMD Lens F/Number F/2.
24 DLP Personal Projector Ti m i ng C h a r t Resolution H Sync ( kHz) V Sync (Hz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 VESA 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 35.0 66.7 Macintosh 640x480 37.9 72.8 VESA 640x480 43.
DLP Personal Projector 25 DIMENSIONS Unit: mm 248 170 59.
An important point after buying a device LG 1024X768 XGA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG 1024X768 XGA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG 1024X768 XGA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG 1024X768 XGA you will learn all the available features of the product, as well as information on its operation. The information that you get LG 1024X768 XGA will certainly help you make a decision on the purchase.
If you already are a holder of LG 1024X768 XGA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG 1024X768 XGA.
However, one of the most important roles played by the user manual is to help in solving problems with LG 1024X768 XGA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG 1024X768 XGA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
