Instruction/ maintenance manual of the product LC 575 Apple
Go to page of 47
Getting Started With Y our Macintosh LC 575 Includes setup instr uctions and important health-related infor mation.
K Apple Computer , Inc. This manual and the software described in it are copyrighted, with all rights reserved. Under the copyright laws, this manual or the software may not be copied, in whole or part, without written consent of Apple, except in the normal use of the software or to make a back up copy of the software.
Communications regulation information v m Setting Up 1 Plugging in the computer 2 Connecting the mouse and keyboard 3 Tu rn ing on your computer for the first time 4 Problems starting up? 5 Safety ins.
m Installing System Software 33 Using the CD as your startup device 34 Reinstalling system software 36 Creating a set of back up floppy disks 38 Copying the Macintosh Basics tour 40 iv Contents.
Communications regulation information This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. See instructions if interference to radio or television reception is suspected.
VCCI statement CD -ROM drive s Warning: Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous exposure. s s Warning: Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes.
Setting Up 1 Setting Up Setting up your computer involves these steps: m Plugging in the computer m Connecting the mouse and keyboard m Tu rn ing on your computer Keyboard Macintosh computer Power cor.
Plugging in the computer Plug in the Macintosh before connecting anything to it. The plug grounds the computer and protects it from electrical damage while you are setting up. S Important: To protect both yourself and the computer from electrical hazards, the computer should remain turned off until you are finished connecting its parts.
s Wa r ning: This equipment is intended to be electrically grounded. Y our Macintosh is equipped with a three-wire grounding plug—a plug that has a third (grounding) pin.
T urning on your computer for the first time In order to start up, your computer must have special software (called system software) installed on the hard disk. Y our computer may have this software already installed. To see if your hard disk already has system sof tware installed, follow these two steps to turn on your computer .
If your screen looks like the one below , with a small, labeled picture (icon) at the top right, then your computer is ready to use. Look at “Safety Instr uctions,” later in this book, for important safety instructions. S Important: If your screen looks like the one below , system software has already been installed.
If you see a blinking question mark on the screen, you’ll need to install system software in one of the following ways: m If your computer came with a CD -ROM disc labeled CD Install Me F irst , see the section of this manual titled “Using the CD Install Me F irst Disc” for instr uctions on how to use the disc to install system software.
Be sure that you always do the following: m Keep your Macintosh away from sources of liquids, such as wash basins, bathtubs, shower stalls, and so on. m Protect your Macintosh from dampness or wet weather , such as rain, snow , and so on. m Read all the installation instructions carefully before you plug your Macintosh into a wall socket.
Musculoskeletal discomfort As with any activity that involves sitting for long periods of time, using a computer can make your muscles sore and stiff . T o minimize these effects, set up your work environment carefully , using the guidelines that follow , and take frequent breaks to rest tired muscles.
Eye fatigue Eye fatigue can occur whenever the eyes are focused on a nearby object for a long time. This problem occurs because the eye muscles must work harder to view an object that’s closer than about 20 feet (6 meters). Improper lighting can hasten the development of eye fatigue.
m P osition your mouse at the same height as your keyboard. Allow adequate space to use the mouse comfortably . m Arrange the computer so the top of the screen is slightly below your eye level when you’re sitting at the keyboard.
m Allow adequate workspace so that you can use your keyboard and mouse comfortably . Place papers or other items so you can view them easily while using your computer . A document stand may make reading papers more comfortable. m Eye muscles must work harder to focus on nearby objects.
The Macintosh comes with a tour and a tutorial to help you start using your computer as quickly as possible. m The Macintosh Basics tour teaches the most basic skills you need to master before you can use your computer .
2. Notice that the arrow ( 8 ) moves in the direction you move the mouse. If the arrow doesn ’t move on the screen, make sure that the cable connecting the mouse to the keyboard is secure and that your mouse is positioned as shown in the picture. (Don ’t disconnect the cable while your computer is on; you could damage your equipment.
4. Being careful not to move the mouse, click the mouse button twice in quick succession . Now your screen should look like the picture shown in this step. If it doesn ’t, tr y steps 3 and 4 again, paying special attention to the following: m Make sure the tip of the arrow is touching the picture, not the words beneath it.
6. Being careful not to move the mouse, pr ess the mouse button twice in quick succession . Now your screen should look like the following illustration: 7.
8. Press the mouse button twice in quick succession. Now your screen should look like the following picture: 9. F ollow the instr uctions on the scr een and work through the tour . When you finish the tour , continue with “T urning the Computer On and Off.
Shutting down the computer with the keyboard To shut down the computer with the keyboard: 1. Press the P ower key (marked with the P icon) on the keyboard. Y ou see a message asking whether you want to shut down or continue working. 2. Click Shut Down .
18 Y our Computer at a Glance Y our Computer at a Glance Mouse Built-in microphone See your Macintosh User’s Guide for information on recording sound. Color Trinitron display Supports up to thousands of colors. Headphone jack Power key Use this key to turn your computer on and off.
Y our Computer at a Glance 19 I Main power switch g SCSI port Connects your Macintosh to SCSI devices, such as hard disk drives, scanners, and printers. See your Macintosh User’s Guide for more information. Power plug Hard disk drive (internal) V ADB port Connects your Macintosh to input devices, such as a keyboard or a trackball.
As you work with your Macintosh, you can consult your Macintosh User ’s Guide for answers to questions that you may have. This section provides information on features that are not covered in the user ’s guide.
Using the sound control buttons on the computer On the front of your Macintosh are two sets of buttons. The set on the right (marked with the - icon) is for sound control. T o use these buttons to increase or decrease the volume of the sounds your Macintosh plays: m Press the button on the top to mak e the sound louder .
Adjusting the screen Y ou can adjust the level of light and dark on the screen of your built-in monitor (to change the contrast) either by using the buttons on the front of the computer or by using the Screen control panel.
Special F eatures 23 Disabling the buttons on the front of your computer Y ou can prevent other people from using the sound and screen contrast buttons on the front of your computer by using the Button Disabler control panel. The Button Disabler control panel is already installed in your Control Panels folder .
Saving energy Y our Macintosh comes with software that reduces the amount of energy consumed when you are not using your computer . The software allows you to set the screen to tur n off after a period of inactivity , the length of which you specif y .
Special F eatures 25 Using the built-in microphone Y our Macintosh comes with a built-in microphone to record live sounds. The microphone is highly sensitive. Once you’ve turned it on (which you do with a sound-recording program), it can pick up sounds within a range of several feet.
To install an expansion card: 1. Choose Shut Down from the Special menu or press the P ower key on the keyboard. 2. T ur n off the computer completely by pressing the main power switch at the back of the computer . 3. Unplug the cable that connects your keyboard to the computer .
7. T ake the back panel off and set it aside. 8. Slide the logic board (the boar d that holds the components that make your computer work) partway out until you have access to the entire slot at the right side of the board. s Wa r ning: Don ’t pull the board all the way out; this can damage your Macintosh.
28 Special F eatures 10. Align the card over the processor -direct expansion slot. 11. Press down on the car d until the connector is solidly in place. Don ’t force the card. If you meet resistance, pull the card out and tr y again. T o see if the card is properly connected, lif t it gently .
Special F eatures 29 14. Replace the back panel of the computer . Slip the back cover over the prongs at the bottom edge of the back of the computer . If your back panel was held on by screws, replace them. s Wa r ning: Never tur n on your computer unless all of its internal and exter nal parts are in place.
Using memor y efficiently If you often see messages that there isn ’t enough memor y , or if you have problems opening application programs, the tips in this section will help you use your computer ’s memor y more efficiently . m If you’re using a RAM disk, make it smaller or turn it off entirely .
Connecting to a network If your computer has an optional Ethernet port, you can connect your Macintosh to any standard high-speed Ethernet network. Y ou can connect your Macintosh to an existing Ethernet network that uses thin coax cables, 10BASE-T twisted pair cables, thick coax cables, or other standard cables.
Using a modem If your computer came with a modem in the optional communications port, your Macintosh can communicate with other computers over standard telephone lines. (F or instr uctions on how to use your modem, see the manual that came with your modem.
If your Macintosh came with a CD -ROM drive, then you also received a CD -ROM disc labeled CD Install Me F irst . This disc takes the place of multiple floppy disks, providing one permanent backup source for important software. In addition, the CD simplifies the process of reinstalling system software (should that ever become necessar y).
Using the CD as your startup device The procedure for starting from the CD Install Me F irst disc varies depending on the condition of the system software on your hard disk.
If you see the Macintosh desktop 1. Press the Open/Close button of the CD-ROM drive to open the CD-ROM tray. 2. Place the CD Install Me First disc into the tray , with the disc label facing up. Make sure the disc is lying flat in the tray . 3. Push the tray in , or pr ess the Open/Close button , to close the tray .
Reinstalling system software Y our Macintosh came with all the necessar y system sof tware installed and ready to use. Occasionally , however , system software can develop problems and need to be replaced. Before you begin, you must start your Macintosh from the CD Install Me F irst disc.
3. In the Installer dialog box, click Install. The Easy Install status box appears and keeps you informed of progress during installation. 4. When you see a message reporting that the installation was successful, click Quit. That’s it! Y ou’ve installed Macintosh system software on your startup disk.
Creating a set of backup floppy disks Y ou can copy the Macintosh system software from the CD Install Me F irst disc to floppy disks. T o copy all of the sof tware, you may need as many as ten 1.4 MB floppy disks. Before you begin, you must start your Macintosh from the CD Install Me F irst disc.
3. In the dialog box that appears, click Make A Copy . Y ou may have to wait a few seconds while the image file is loaded. 4. When you see a message telling you to insert a disk, insert a floppy disk. If an alert box appears asking whether you want to replace the contents of the disk, click Duplicate.
Copying the Macintosh Basics tour Macintosh Basics is a hands-on tour of the Macintosh desktop that teaches important skills for using the computer . Y our Macintosh came with the tour already installed on your hard disk, but if you need another copy , you can get one from the CD Install Me F irst disc.
The Apple Publishing System This Apple manual was written, edited, and produced on a desktop publishing system using Apple Macintosh computers and QuarkXPress. T echnical illustrations were drawn with Adobe Illustrator; screen shots were created and modified with system software, Exposure Pro, Aldus SuperPaint, and Adobe Photoshop.
An important point after buying a device Apple LC 575 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple LC 575 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple LC 575 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple LC 575 you will learn all the available features of the product, as well as information on its operation. The information that you get Apple LC 575 will certainly help you make a decision on the purchase.
If you already are a holder of Apple LC 575, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple LC 575.
However, one of the most important roles played by the user manual is to help in solving problems with Apple LC 575. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple LC 575 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
