Instruction/ maintenance manual of the product KVM2KIT Linksys
Go to page of 7
ProConnect Series Use this Guide to install: KVM2KIT Integrated K V M 2-Por t Switch Installation Guide.
COPYRIGHT & TRADEMARKS Copyright © 2003 Linksys, All Rights Reserved. ProConnect is a trademarks of Linksys. Linksys is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.
Integrated KVM 2-Port Switch 3 Console • One V GA, SV GA or Multisync Monitor Capable of the Highest Resolution Y ou W ill Be Using on Either Computer • One PS/2 Ke yboard • One PS/2 Mouse Eithe.
5 4 Integrated KVM 2-Port Switch The KVM Switch is controlled b y hot ke y commands, also known as k eyboard shortcuts. Hot key commands allo w you to con veniently access either comput- er directly from the k eyboard. Using hot ke ys, you can manuall y toggle betw een computers or automatically c ycle between computers at a preset time interval.
Initiate A uto Scan Mode and Change the Scan Interv al If you w ant to change the can interval, use the follo wing hot ke y combination: 1. Press and release the left Shift key . 2. Press and release the right Shift ke y . 3. Press and release the s key .
Integrated KVM 2-Port Switch F or help with installation or operation of this product, contact Linksys T echnical Support at one of the phone numbers listed in the T echnical Support inser t or Inter net addresses belo w: E-mail Europe europe-support@linksys.
© Cop yr ight 2003 Linksys, All Rights Reserved. Printed in the USA. www .linksys.com.
An important point after buying a device Linksys KVM2KIT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys KVM2KIT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys KVM2KIT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys KVM2KIT you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys KVM2KIT will certainly help you make a decision on the purchase.
If you already are a holder of Linksys KVM2KIT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys KVM2KIT.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys KVM2KIT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys KVM2KIT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
