Instruction/ maintenance manual of the product LME5000 Applica
Go to page of 11
M o d e l ❑ L M E 5 0 0 0 Acc ess ori es/ Par ts (US A/Ca nad a) 1-8 00- 738 -02 45 US A/ Ca na d a1- 80 0- L IT MA ID (5 48 -6 24 3) ww w. li tt er ma id .c om Please Read and Save this Use and Care Book Reg ist er yourpro du ctonl ine atwww.
2 1 Instructions pertaining to a risk of fire, electric shock or injury to persons. WARNING: When using electric appliances, basic precautions should always be followed i.
4 3 Product may vary slightly from what is illustrated. 1. ON/OFF button 2. Power lightindicator 3. Warranty board † 4. Batterycompartment cover (Part# 7688-9320W) (batteries not included) 5.
6 5 Accessories Check ouronline service for parts and accessories at www.littermaid.com or call1-800-548-6243 Model # LitterMaid KittyKabana ™.
Assembly 1. Slide receptacle supports (marked L (left) and R (right)) into grooves on the bottom tray until they lock into place (A) . 2. Place both left and right flaps flat on top of the waste receptacle compartment panel. 3. Push the flaps in and up until they click into place (B) .
Sensors Sensors (located on interior side panels) must be kept clean. Wipe sensors with a soft, dry cloth to keep them dust free (U) . 10 9 Install rake 12. Align tracks on back of rake (each end) and slide into grooves on motor housing (R) . 13. Remove the AC adapter from where it is packed in the styrofoam and plug it into the unit (S) .
12 11 Care and Cleaning Sensor Covers The two sensors located on the interior side panels are protected by sensor covers that need to be kept dust free. After changing or adding litter, wipe each sensor with a soft, dry cloth to remove dust. Litter Tray Use only premium clumping litter.
14 13 Troubleshooting Rake continues to go through cleaning cycles. Probable Cause: • Too much litter in the litter box is causing excess litter to collect behind the rake, preventing it from returning to home position or there is an obstacle in front at the rake.
16 15 Probable Cause: • Power outage or batteries are incorrectly installed or dead. Solution: 1. Press ON/OFF button OFF then back ON. 2. Make sure there is power to the unit and/or fresh batteries are correctly installed.
Solution: 1. Press ON/OFF button OFF. 2. Unplug unit. 3. Remove batteries. 4. Clean unit (check track for litter). 5. Wipe sensors. 6. Put unit together and plug into AC power only and press ON/OFF button to turn unit ON for the automatic cycle. If green ionize LED is off.
Copyright © 2008 Applica Consumer Products, Inc. Made in People’s Republic of China Printed in People’s Republic of China R22006/10-18-55E WIN.
An important point after buying a device Applica LME5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Applica LME5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Applica LME5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Applica LME5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Applica LME5000 will certainly help you make a decision on the purchase.
If you already are a holder of Applica LME5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Applica LME5000.
However, one of the most important roles played by the user manual is to help in solving problems with Applica LME5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Applica LME5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
