Instruction/ maintenance manual of the product DHP481RTJ Makita
Go to page of 12
1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORT ANT : Read Before Using. Cordless Hammer Driver Drill DHP481 014694.
2 ENGLISH (Orig inal instruct ions) SPECIFICA TIONS Model DHP481 Drilling into concrete 16 mm Drilling into steel 13 mm Drilling into wood 76 mm Fastening wood screw 10 mm x 90 mm Capacities Fastening.
3 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the ri sk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling o r unpl ugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
4 Service 28. Have your power tool serviced by a qualified repair person using only identical replacement p arts. This w ill ensure that the safety of the pow er tool is maintai ned. 29. Follow instruction for lubricating and changing accessories. 30.
5 FUNCTIONAL DESCRIPTION CAUTION : • Always be sure tha t the tool is sw itched off and the battery cartridge is removed before adjusting or checking fun ction on th e tool. Inst alling or remo ving battery cartridge 1 2 3 014707 CAUTION : • Always switch o ff the too l before inst alling or removing of the battery cartridge.
6 LED indicator status Remaining battery capacity About 50% or more About 20% - 50% About less than 20% 013980 NOTE: • The LED display goes of f approximately one minute after releasing the switch trigger to save the battery power . T o check the remaining battery capacity , slightly pull th e switch trigger .
7 Speed change CAUTION : • Always set the speed change lev er fully to the correct position. If you operate the tool with the speed change lev er positioned ha lfway between the "1" side and, "2" side, the to ol may be damaged. • Do not use the speed change lever w hile the tool is running.
8 Inst alling or remo ving driver bit or drill bit 1 014698 T urn the sleeve counter clockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. T urn the sleeve clo ckwise to tighten the chuck. T o remove the bit, turn the sleev e counterclockwise.
9 Blow-out bulb ( optional accessor y) 1 002449 After drilling the hole, use the blow-out bulb to cle an the dust out of the ho le. Screwdriving operation First, slide the action mode change lever so that it points to the marking. Adjust the adjusting ring to the proper torque lev el for your w ork.
10 OPTIONAL ACCESSORIES CAUTION : • These accessori es or atta chments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or atta chments might present a risk of injury to persons. Only use accessory or attachment for it s stated purpose.
11.
12 Makita Corporation www.makita.com 885341-3.
An important point after buying a device Makita DHP481RTJ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita DHP481RTJ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita DHP481RTJ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita DHP481RTJ you will learn all the available features of the product, as well as information on its operation. The information that you get Makita DHP481RTJ will certainly help you make a decision on the purchase.
If you already are a holder of Makita DHP481RTJ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita DHP481RTJ.
However, one of the most important roles played by the user manual is to help in solving problems with Makita DHP481RTJ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita DHP481RTJ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
