Instruction/ maintenance manual of the product MAX1415EUE Maxim
Go to page of 14
General Description The MAX1416 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX1416 multichannel, 16-bit, sigma-delta data-acquisition system. Windows ® 98/2000/XP software provides a convenient user interface to exercise the features of the MAX1416.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System 2 _______________________________________________________________________________________ Component Suppliers SUPPLIER PHONE FAX WEBSITE Taiyo Yuden 800-348-2496 847-925-0899 www.
The Setup, Clock, Offset, and Gain tab sheets provide read/ write access to each of the registers. See Figures 2–5. The Comms and Data (Figure 6) tab sheet provides access to the Standby bit. The comms registers RS2, RS1, RS0, and R/W bits are automatically set by each register’s read and write buttons.
Evaluates: MAX1416/MAX1415/MX7705 Problem: Internal oscillator does not work. The internal-oscillator mode is a feature of the MAX1416/MAX1415 only, and is not supported on the MX7705. The MX7705 requires an external clock, and can only be used with INT = 0.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System _______________________________________________________________________________________ 5 Figure 1.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System 6 _______________________________________________________________________________________ Figure 2.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System _______________________________________________________________________________________ 7 Figure 3.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System 8 _______________________________________________________________________________________ Figure 4.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System _______________________________________________________________________________________ 9 Figure 5.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System 10 ______________________________________________________________________________________ Figure 6.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System ______________________________________________________________________________________ 11 Figure 7.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System 12 ______________________________________________________________________________________ Figure 9. MAX1416 EV Kit Schematic J1 CONNECTOR J1-9 N.C. J1-10 N.C. J1-11 N.C. J1-12 N.
Evaluates: MAX1416/MAX1415/MX7705 MAX1416 Evaluation Kit/ Evaluation System ______________________________________________________________________________________ 13 Figure 10.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
An important point after buying a device Maxim MAX1415EUE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxim MAX1415EUE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxim MAX1415EUE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxim MAX1415EUE you will learn all the available features of the product, as well as information on its operation. The information that you get Maxim MAX1415EUE will certainly help you make a decision on the purchase.
If you already are a holder of Maxim MAX1415EUE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxim MAX1415EUE.
However, one of the most important roles played by the user manual is to help in solving problems with Maxim MAX1415EUE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxim MAX1415EUE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
