Instruction/ maintenance manual of the product XT4871 MaxTech
Go to page of 10
Part #MAN104 Rev 1.0 XT4871 USER'S MANUAL 14 INCH COLOR MONITO R XT4871 Features: • 1024 x 768, Non-Interlaced • 1280 x 1024, Interlaced • .
1 T able of Contents Section 1 - General Information ............................................................ 2 Section 2 - Installation ........................................................................... 3 Section 3 - Monitor Controls and LEDs .
2 Section 1 - General Information Congratulations on purchasing a MaxTech 14-inch Color Monitor. The monitor uses one of the finest CRTs available in the industry. The 0.28 mm dot pitch non-glare tube, provides a crisp and vivid color display. The monitor complies with the MRP-I standard to reduce electro-magnetic emissions.
3 Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. When the synchronization signals are re-enabled the monitor returns to normal operation. Section 2 - Installation 2.1 Attaching the Base • Carefully place the monitor on its side or top.
4 • The monitor is now ready for use. Section 3 - Monitor Controls and LEDs 1. POWER LED: Lit when monitor is ON. Unlit when monitor is OFF. 2. POWER : Press once to turn monitor ON. Press again to turn monitor OFF. 3. CONTRAST: Adjusts the contrast.
5 6. PINCUSHION: Adjusts the pincushion (shape) of the display 7. HORIZONTAL-SIZE: Adjusts the display width. 8. VERTICAL-POSITION: Adjusts the vertical position 9. VERTICAL-SIZE: Adjusts the display height 10. HORIZONTAL-POSITION: Adjusts the horizontal position 11.
6 1024 x 768 70 Hz 1152 x 864 60 Hz 1280 x 1024 43 Hz Deflection Geometric distortion H.<=2.5mm, V.<=2.5mm Linearity distortion H<=10%, V<=8% Pincushion distortion <=2mm High voltage re.
7 Appendix C - Three Year Warranty MaxTech warrants to the original buyer of this product against defects in material and workmanship for three years from the date of purchase. Except as specified below, this warranty covers all defects in material or workmanship in this product.
8 address provided by the technician when you call. We recommend that the unit be insured. This warranty is valid for products sold in North America only. Contact your local authorized distributor or dealer for the warranty offered in other areas. All warranty services must be performed by Authorized Service Centers.
9 • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which t.
An important point after buying a device MaxTech XT4871 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT4871 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT4871 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT4871 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT4871 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT4871, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT4871.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT4871. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT4871 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
