Instruction/ maintenance manual of the product SP624R MicroNet
Go to page of 7
Quick Installation Guide EtherFast 10 /100M S w itch Model No.: SP624R http://www .micronet.info.
1 Introduction Micronet SP624R 10/100M Switc h provides powerful, high-performanc e Ethernet switch, with all ports capable of 10 and 100M auto-negotiation operation. With it s intelligent addressing engine, it provides users with a wire-speed filtering and forwarding of the traffic.
2 Features y Compliant with IEEE802.3 10Base-T , IEEE802.3u 100Base-TX and IEEE802.3x flow control y Support auto-negotiation function to automatically select optimal speed (10/100M) and mode ( Full/Half Duplex) y Support auto uplink, no more cros s-over cable y Support 802.
3 Physical Description SP624R front view Please refer to the following table for LED definition. LED St at us Operatio n On Power is on. POWER Off Power is off. On/Green Connection established. Blink/Green T ransmitting or receiving dat a. LNK/ACT Off No link.
4 Inst allation y Rack Mounting The switch can be mounted in an EIA standard 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting bracket s at the switch’ s front panel (one on each side), and secure them with the provided screws.
5 S pecifications St an da rd IEEE802.3, IEEE802.3u, IEEE802.3x, compliant Interface 24 * 10/100M RJ-45 ports Cable Connecti ons 10BASE-T : Cat. 3, 4, 5 UTP/STP 100BASE-TX: Cat. 5 UTP/STP Dat a T ransfer Rate 10M(Half duplex)/20M(Full duplex ) 100M(Half duplex)/200M(F ull duplex) Uplink Auto Uplink (Auto MDI / MDI-X) Switch Fabric 4.
6 CE Mark W arning This equipment complies with the requirements relating to electromagnetic compatibility , the essential protection requirement of Council Directive 89/336/EEC on the approximati on of the laws of the Member S tates relating to electromagnetic compatibility .
An important point after buying a device MicroNet SP624R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroNet SP624R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroNet SP624R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroNet SP624R you will learn all the available features of the product, as well as information on its operation. The information that you get MicroNet SP624R will certainly help you make a decision on the purchase.
If you already are a holder of MicroNet SP624R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroNet SP624R.
However, one of the most important roles played by the user manual is to help in solving problems with MicroNet SP624R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroNet SP624R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
