Instruction/ maintenance manual of the product S185 Miele
Go to page of 24
Operating Instructions V acuum Cleaner S185 Please carefully study these Operating Instructions before attempting to operate the unit and note the listed Important Safety Instructions.
– 2 – When using this vacuum cleaner , basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not leave the vacuum cleaner unattended when it is plugged in.
– 3 – ON BEATE BAR STO B-2) Cord clip I) Bag check indicator Dust bag cover Release button Exhaust cover / HEP A filter D) Front edge cleaning Cleaning head A-1) Handle A-3) Hose clip Hose sup.
– 4 – A) HANDLE ASSEMBL Y 1) Align the handle with the body of the cleaner as shown in the illustration. 3) Place the hose under the hose clip. Push in to secure.
– 5– C) ON / OFF SWITCH AND V ARIABLE POWER CONTROL The sliding button - located on the control panel - is used to switch the vacuum cleaner ON/OFF and vary the motor speed depending on the suction required. T o switch ON, slide the button sideways.
– 6– E) HANDLE HEIGHT AND BEA TER BAR ADJUSTMENT T o lower the body of the cleaner , step on the foot pedal at the bottom left corner of the vacuum cleaner . Once the body is reclined, the brush will automatically start to rotate. If you wish to stop the beater bar , simple return the cleaner into the upright position.
– 7 – I) BAG CHECK INDICA TOR The bag change indicator is a visual aid to advise you of the condition of the dust bag. The GREEN mark indicates that the dust bag is still empty . The RED mark will appear when airflow through the bag is insufficient.
– 8 – FIL TER CARE In addition to the dust bag, the vacuum cleaner contains two filters; a central filter that protects the motor (Fig.1) and a HEP A Filter , that removes particles from the exhausted air (Fig. 2). The HEP A Filter should be changed every six months or whenever it becomes dirty .
– 9 – BLOCKAGES - UNPLUG THE MACHINE FROM THE W ALL MAINTENANCE FOR THE BEA TER BAR DO NOT USE YOUR FINGERS OR HANDS TO REMOVE OR CLEAN THE BEA TER BAR. When it is necessary to remove thread, string, hair , etc., which has wound around the beater bar , cut across them with a pair of scissors making sure not to cut the brush.
– 10 – REPLACING P ARTS HOW TO REPLACE - DRIVE BEL T (Part # S01Z6000) AND BEA TER BAR ASSEMBL Y (Part # R98M9064) 1. Remove the 5 screws from the base plate and lift it off. (Fig. 1) 2. Release the belt from the motor shaft and lift the beater bar assembly to remove the belt.
– 1 1 – CORD CARE STORING THE APPLIANCE ON BEATE BAR STO T o avoid damaging the power cord, never run over the cord or allow it to become caught in the beater bar when using the vacuum cleaner . Hold any excess cord in your free hand while vacuuming in order to avoid running over the cord.
National Headquarters MIELE, INC. 9 INDEPENDENCE WA Y PRINCETON, NJ 08540 Phone: (609) 419-9898 or (800) 843-7231 Fax: (609) 419-4298 Miele Design Centers National Headquarters Miele, Inc. 9 Independence W ay Princeton, NJ 08540 Phone: (609) 419-9898 Fax: (609) 419-4298 Southwest Miele, Inc.
Instructions d’utilisation Aspirateur S185 V euillez lire attentivement ces instructions d’utilisation et prendre connaissance des consignes de sécurité avant d’utiliser cet appareil.
– 2 – CONSIGNES DE SÉCURITÉ IMPOR T ANTES Lorsque vous utilisez un aspirateur , vous devez toujours prendre des précautions essentielles, y compris ce qui suit.
Sac à poussière – 3 – ON BEATE BAR STO B-2) Pince de retenue I) V oyant de remplacement du sac à poussière Couvercle du compartiment du sac à poussière Bouton d’ouverture du couvercle .
– 4 – A) ASSEMBLAGE DU MANCHE 1) Alignez le manche et le corps de l’appareil comme dans l’illustration. 3) Insérez le tuyau sous l’attache. Poussez-le vers l’intérieur pour qu’il soit bien en place. REMARQUE: Enroulez toujours le tuyau dans le sens des aiguilles d’une montre.
– 5– C) BOUTON MARCHE-ARRÊT / RÉGLAGE DE LA PUISSANCE D’ASPIRA TION Le curseur , situé sur le panneau de commande, sert à mettre l’aspirateur en marche ou à l’arrêter , et à régler la vitesse du moteur selon la puissance d’aspiration requise.
– 6– E) RÉGLAGE DE LA HAUTEUR DU MANCHE ET DU ROULEAU BA TTEUR Pour abaisser le corps de l’aspirateur , appuyez avec le pied sur la pédale située du côté gauche, au bas de l’aspirateur . Une fois le corps incliné, la brosse rotative se mettra automatiquement à tourner .
– 7 – I) VOY ANT DE REMPLACEMENT DU SAC À POUSSIÈRE REMARQUE: Si, après avoir remplacé le sac, le voyant est toujours ROUGE, vérifiez que le tuyau ou l’orifice d’aspiration n’est pas obstrué. (Consultez la section OBSTRUCTIONS.) Il se peut que le voyant devienne rouge lorsque vous utilisez le suceur plat.
2) Saisissez l’anse du sac et tirez. 3) Avant de jeter le sac, fermez-le avec la languette pour éviter que de la poussière s’en échappe. 5) Remettez en place le couvercle du compartiment du sac à poussière en insérant l’ergot dans la fente du corps de l’appareil, puis poussez sur le haut du couvercle.
– 9 – OBSTRUCTIONS – DÉBRANCHEZ L ’APP AREIL ENTRETIEN DU ROULEAU BA TTEUR NE VOUS SERVEZ P AS DE VOS MAINS OU DE VOS DOIGTS POUR NETTOYER OU ENLEVER LE ROULEAU.
– 10 – ENTRETIEN REMPLACEMENT DE LA COURROIE (Pièce nº S01Z6000) ROULEAU BA TTEUR (Pièce nº R98M9064) 1. Enlevez les cinq vis de la base et soulevez-la (Illust. 1). 2. Enlevez la courroie de l’axe du moteur et soulevez le rouleau pour enlever la courroie (Illust.
– 1 1 – PRÉCAUTIONS CONCERNANT LE CORDON RANGEMENT DE L ’APP AREIL ON BEATE BAR STO Pour éviter d’endommager le cordon d’alimentation, ne passez pas l’aspirateur sur ce dernier et ne le laissez pas se prendre dans le rouleau batteur .
Z07Z8090 Imprimé a l’Espagne Miele Limitée Siège social au Canada 55G, East Beaver Creek Road Richmond Hill (Ontario) L4B 1E5 Téléphone : (800) 643-5381 (905) 707-1171 Télécopieur : (905) 707-0177 www .miele.ca info@miele.ca (questions générales) professional@miele.
An important point after buying a device Miele S185 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele S185 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele S185 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele S185 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele S185 will certainly help you make a decision on the purchase.
If you already are a holder of Miele S185, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele S185.
However, one of the most important roles played by the user manual is to help in solving problems with Miele S185. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele S185 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center