Instruction/ maintenance manual of the product Heart Rate Monitor MSC
Go to page of 8
-1- 1 Parts Installation * If you already ha ve CA T EYE Cyclocomputer Model CC- CD100, you can use the same bracket and sensor; so you do not need parts installation.
-2- within 10cm Important The clearance between the sensors 23 and the magnets qw should be about 5mm. Align the center of the magnets qw and the sensor’s marking line while rotating the wheel or crank. Caution: Attach the sensor and the magnet within 10cm from the hub axle.
-3- Magnet & Sensor ! Use a coin to attach the wheel magnet q temporarily to the right side spoke of front wheel. Caution: Attach the sensor and the magnet within 10cm from the hub axle. @ Attach the speed sensor 2 temporarily to the right front fork.
-4- MainUnit Mount: 1. First hook the upper part of the unit. Then push the bottom part into the bracket while holding the lever. Release the lever and the unit is fixed into position. Caution: Be sure to push the lever when mounting the main unit. Never press the main unit forcibly onto the bracket.
-5- Setting up Main Unit Input the wheel circumference of your bicycle into the main unit. Find out your bicycle ’ s wheel circumference from the table below.
-6- S E T /A T L T LAP S/S MODE Average Speed Trip Distance Maximum Heart Rate Maximum Speed Total Distance Clock Time (Current Speed) Cadence (Current Speed) Elapsed Time (S) (S) C Measurement screen map Switching the low er display b y pushing MODE button.
-7- Shows Current Speed Shows Heart Rate Flash (4) Checking Sensors Speed Sensor Spin the front wheel and see if the speed appears in the display. Cadence Sensor Press MODE button and na vigate to Cadence in the low er display . Spin the crank reversely and check if Cadence starts counting.
-8- Press Simultaneously The following features and operations are important when you use MSC-2Dx. Auto time feature When this function is on, “ ” icon appears. The main unit detects the wheel rotation and automatically starts/stops measurement. In the default state, this function is off.
An important point after buying a device MSC Heart Rate Monitor (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MSC Heart Rate Monitor yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MSC Heart Rate Monitor - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MSC Heart Rate Monitor you will learn all the available features of the product, as well as information on its operation. The information that you get MSC Heart Rate Monitor will certainly help you make a decision on the purchase.
If you already are a holder of MSC Heart Rate Monitor, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MSC Heart Rate Monitor.
However, one of the most important roles played by the user manual is to help in solving problems with MSC Heart Rate Monitor. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MSC Heart Rate Monitor along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
