Instruction/ maintenance manual of the product BCR4 BCK MTD
Go to page of 12
BCR4 BCK Brushcutter Kit OPERA TOR’S MANUAL IMPORT ANT MANUAL DO NOT THROW AW A Y.
2 Thank You Thank you for purchasing this quality product. This modern outdoor power tool is designed to provide many hours of useful service. Y ou will find it to be a great labor -saving device. This operator’ s manual provides you with easy-to- understand operating instructions.
RULES FOR SAFE OPERA TION 3 SYMBOL MEANING W ARNING: Failure to obey a safety warning can result in serious personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire and personal injury . CAUTION: Failure to obey a safety warning can result in serious personal injury to yourself or to others.
RULES FOR SAFE OPERA TION 4 • Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating. • Do not operate the engine faster than the speed needed to cut, trim or edge. Do not run the engine at high speed when not cutting.
RULES FOR SAFE OPERA TION 5 SAFETY AND INTERNA TIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety , assembly , operating, maintenance and repair information.
FIGURE 2 FIGURE 3 ASSEMBL Y INSTRUCTIONS 6 INST ALL THE BRUSHCUTTER KIT The Brush Cutter Kit consists of: • J-handle and hardware • Harness • New cutting attachment mount • New cutting attachment shield • Cutting blade • Blade retainer and nut • Locking Rod The D-handle and old cutting attachment shield must be removed and replaced.
FIGURE 8 FIGURE 7 FIGURE 6 FIGURE 5 FIGURE 4 7 ASSEMBL Y INSTRUCTIONS Adjustment 7. Loosen the screws so that the J-handle easily moves in the clamp assembly . Do not remove the screws or nuts. 8. Slide the J-handle in or out until the arrow/white line on the decal touches the clamp assembly .
FIGURE 12 FIGURE 9 8 ASSEMBL Y INSTRUCTIONS FIGURE 11 REMOVE THE CUTTING A TT ACHMENT NOTE: To make removing or installing the cutting blade or cutting attachment easier , place the unit on the ground or on a work bench. W ARNING: The gear housing gets hot with use and can result in injury to the operator .
FIGURE 14 9 ASSEMBL Y INSTRUCTIONS FIGURE 15 FIGURE 16 FIGURE 17 FIGURE 13 INST ALL THE NEW CUTTING AT T ACHMENT SHIELD MOUNT Install the cutting attachment shield mount on the gear housing by installing the three (3) bolts and nuts removed from the old cutting attachment shield with a 7/16 wrench.
10 FIGURE 18 ASSEMBL Y INSTRUCTIONS W ARNING: If the cutting blade is off-center , the unit will vibrate, and the blade may fly off, which can cause serious personal injury . 5. Put the blade retainer and nut on the output shaft. Make sure that the blade is installed correctly .
11 FIGURE 21 6. Remove the locking rod. 7. Install the cutting attachment shield. See Remove and Install Cutting Attachment Shield . W ARNING: To avoid serious personal injury , the cutting attachment shield MUST be in place at all times during operation as a grass trimmer .
FIGURE 24 OPERA TING INSTRUCTIONS USING THE CUTTING BLADE W ARNING: Always wear eye, hearing, foot, body protection and the harness to reduce the risk of injury when operating this unit. W ARNING: Do not use the cutting blade for edging or as an edger; severe personal injury to yourself or others can occur .
An important point after buying a device MTD BCR4 BCK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTD BCR4 BCK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTD BCR4 BCK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTD BCR4 BCK you will learn all the available features of the product, as well as information on its operation. The information that you get MTD BCR4 BCK will certainly help you make a decision on the purchase.
If you already are a holder of MTD BCR4 BCK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTD BCR4 BCK.
However, one of the most important roles played by the user manual is to help in solving problems with MTD BCR4 BCK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTD BCR4 BCK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
