Instruction/ maintenance manual of the product MTX70HF Multiquip
Go to page of 68
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
P A GE 2 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) PROPOSITION 65 W ARNING.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 3 NOTES.
P A GE 4 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) T ABLE OF CONTENTS MTX70HF Rammer Proposition 65 Warning ........................................... 2 P ar ts Ordering Procedures ..................................
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 5 P AR TS ORDERING PROCEDURES www .multiquip .com Or dering par ts has never been easier! Choose fr om three easy op.
P A GE 6 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) SAFETY INFORMA TION Do not operate or ser vice the equipment before reading the entire manual. Saf ety precautions should be follo wed at all times when operating this equipment.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 7 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER ope ra te this equ ipm ent wit hou t pro per pro tec tiv e .
P A GE 8 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) SAFETY INFORMA TION ENGINE SAFETY D ANGER Th e engin e fu el ex hau st gase s con tai n poi son ous carb on mono xide. This gas is color less and odor less, and can cause death if inhaled.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 9 SAFETY INFORMA TION TRANSPORTING SAFETY CA UTION NEVER allow any person or animal to stand underneath the equipment while lifting.
P A GE 10 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) SPECIFICA TIONS T able 1. Rammer Specifications Over all Height 40.04 in. (1017 mm) Over all Width 13.78 in. (350 mm) Over Length 28.1 in. (713 mm) Shoe Size (W x L) 13.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 11 GENERAL INFORMA TION DEFINITION OF T AMPING RAMMER The Multiquip MTX70HF tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutiv e impacts to a soil surf ace.
P A GE 12 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) COMPONENTS Figure 1. MTX70HF Rammer 2 1 9 3 4 5 6 7 10 1 1 12 13 8 Fig ure 1 show s the locat ion of the contro ls and compo nent s f or the MTX70HF T amping Rammer .
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 13 BASIC ENGINE Figure 2. Honda GX100 Engine The engine (Figure 2) must be chec ked f or proper lubri- cation and filled with fuel prior to operation. Ref er to the engine manuf acturer's manual for detailed operation and ser vice inf or mation.
P A GE 14 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) INSPECTION It is e xtremely important that this section be read carefully bef ore attempting to operate the rammer . DO NOT use your r ammer until this section is thoroughly understood.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 15 OPERA TION INITIAL ST ARTUP When star ting the MTX70HF T amping Rammer perform the f ollowing: 1. Slide the throttle lev er from the stop to the idle position ( ) (Figure 6).
P A GE 16 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) OPERA TION OPERA TION 1. T o star t the rammer tamping action, mo ve the throttle le ver (Figure 9) quickly from IDLE to the ST ART ( ) position. DO NO T move the throttle lev er slowly as this ma y cause damage to the clutch or spring.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 17 MAINTENANCE P erform the scheduled maintenance procedures as indi- cated: D AIL Y Thoroughly remov e dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessar y .
P A GE 18 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) TROUBLESHOOTING T roubleshooting (Engine) Symptom P ossible Problem Solution Diffi cult to star t, fuel is availab le, but no spark at spark plug. Spark plug bridging? Check gap , insulation or replace spar k plug.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 19 TROUBLESHOOTING T roubleshooting (Engine) - contin ued Symptom P ossible Problem Solution Weak in po wer , compression is proper and does not misfi re. Air cleaner dir ty? Clean or replace air cleaner .
P A GE 20 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) TROUBLESHOOTING T roubleshooting (Rammer) Symptom P ossible Problem Solution Engine runs but rammer jumps erratically or not at all. Operating speed of throttle le v er is incorrectly set? Set throttle le ver to correct position.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 21 NOTES.
P A GE 22 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) EXPLANA TION OF CODE IN REMARKS COLUMN The following section explains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help number s fo und on the back page of the man ual if ther e are any questions .
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 23 SUGGESTED SP ARE P AR TS MTX70HF RAMMER WITH HOND A GX100UKRB5 ENGINE 1 T O 3 UNITS Qty . P/N Description 1............956100062 ............ THRO TTLE WIRE 3......
P A GE 24 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) NAMEPLA TES AND DECALS 13$ 6723 13$ 13$ 1 1 1 2 4 3 5 6 7 8 A (DECAL.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 25 NAMEPLA TES AND DECALS NO . P ART NO . P ART NAME QTY . REMARKS A 920900040 DECAL SET .
P A GE 26 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) CRANKCASE AND ENGINE ASSY 1 31 53 54 59 32-1 63 61 61 60 43-2 50 50 62 58 3 5 6 7 9 10 1 1 12 13 14 15 17 16 19 2.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 27 CRANKCASE AND ENGINE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366910010 CRANKCASE .
P A GE 28 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) CRANKCASE AND ENGINE ASSY 1 31 53 54 59 32-1 63 61 61 60 43-2 50 50 62 58 3 5 6 7 9 10 1 1 12 13 14 15 17 16 19 2.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 29 CRANKCASE AND ENGINE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 42-1 001220851 BOL T 8X55 T 2 42-2 030208200 W.
P A GE 30 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) GUIDE CYLINDER ASSY 17 18 8 9 13 15 16 14 4 5-1 5-2 6 7 9 12 3 1 2 21 32 20 22 23 24 25 25 27 28 29 51 27 28 24 5.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 31 GUIDE CYLINDER ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366460100 PISTON PIN 1 2 366459910 PLUG, PISTON PI.
P A GE 32 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) FOOT ASSY 2 3 2 3 6 1 5 4.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 33 FOOT ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 8511S FOO T ASSY 285 1 2 0211121409 NYLON NUT M12 4 3 030212.
P A GE 34 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) FUEL T ANK AND HANDLE ASSY 3 1 4-2 4-1 7 6 5 41 41 43 43 42 42 2-1 2-2 11-2 11-1 11-2 11-1 11-2 11-1 4-2 4-1 12 1.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 35 FUEL T ANK AND HANDLE ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 366346270 SHOCK ABSORBER W/PIN 2 2-1 001521.
P A GE 36 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) COMBINA TION LEVER ASSY.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 37 COMBINA TION LEVER ASSY NO . P ART NO . P ART NAME QTY . REMARKS A 956200110 COMB.
P A GE 38 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) TOOLS ASSY.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 39 TOOLS ASSY NO . P ART NO . P ART NAME QTY . REMARKS 1 981010400 CLUTCH PULLER A 1 2 983010060 CLUTCH MOUNTER 1 3 .
P A GE 40 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CYLINDER BARREL ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 41 HONDA GX100KRB5 ENGINE — CYLINDER BARREL ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 12000Z0D405 BARREL ASSY ., CYLINDER ............................1......
P A GE 42 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CRANKCASE COVER ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 43 HONDA GX100KRB5 ENGINE — CRANKCASE COVER ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 11300Z0D409 CO VER ASSY ., CRANK CASE .........................1.......
P A GE 44 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CRANKSHAFT ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 45 HONDA GX100KRB5 ENGINE — CRANKSHAFT ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 3 13310Z0D V70 CRANK SHAFT COMP .....................................1........
P A GE 46 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — PISTON/CONN. ROD ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 47 HONDA GX100KRB5 ENGINE — PISTON/CONN. ROD ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 13010Z0D003 RING SET , PIST ON 1 2 13101Z0D000 PIST ON 1 3 13111ZE0000 PIST ON PIN 1 4 13200Z0D000 CONNECTING ROD ASSY .
P A GE 48 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CAMSHAFT ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 49 HONDA GX100KRB5 ENGINE — CAMSHAFT ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 50 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — RECOIL ST AR TER ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 51 HONDA GX100KRB5 ENGINE — RECOIL ST AR TER ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 28400Z0D V04ZA RECOIL ST ARTER ASSY .................................1.
P A GE 52 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — F AN COVER ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 53 HONDA GX100KRB5 ENGINE — F AN COVER ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 54 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CARBURETOR ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 55 HONDA GX100KRB5 ENGINE — CARBURETOR ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 56 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — AIR CLEANER ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 57 HONDA GX100KRB5 ENGINE — AIR CLEANER ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 58 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — MUFFLER ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 59 HONDA GX100KRB5 ENGINE — MUFFLER ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 60 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — FL YWHEEL IGNITION ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 61 HONDA GX100KRB5 ENGINE — FL YWHEEL IGNITION ASSY . NO . P ART NO .
P A GE 62 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — CONTROL ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 63 HONDA GX100KRB5 ENGINE — CONTROL ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 64 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) HONDA GX100KRB5 ENGINE — LABELS ASSY ..
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 65 HONDA GX100KRB5 ENGINE — LABELS ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 2 87521ZOD V02 LABEL, TRADE MARK 1 4 87516Z0JOOO MARK, OPERA T OR CA UTION 1 6 87601Z4EW50 MARK, TYPE (KRBF) 1 9 87539Z0JOOO MARK, EX.
P A GE 66 — MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) TERMS AND CONDITIONS OF SALE — P AR TS P A YME NT TERMS T er ms of payment for par ts are net 30 days. FREIG HT POLICY Al l par t s ord er s wi ll b e s hi p pe d c o ll ec t or prepaid with the charges added to the invoice.
MTX70HF RAMMER • OPERA TION AND P ARTS MANU AL — REV . #0 (03/08/12) — P A GE 67 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ Parts Department 18910 Wilmington A ve. Carson, CA 90746 Contact: mq@multiquip .
An important point after buying a device Multiquip MTX70HF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip MTX70HF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip MTX70HF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip MTX70HF you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip MTX70HF will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip MTX70HF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip MTX70HF.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip MTX70HF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip MTX70HF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
