Instruction/ maintenance manual of the product MT5634ZBA-GLOBAL Multitech
Go to page of 41
MultiModem ® ZBA MT5634ZBA-Series MT5634ZBA MT5634ZBA-Global MT5634ZBA-V92 MT5634ZBA-V-V92 User Guide.
MultiModem ZBA MT5634ZBA-Series User Guide MT5634ZBA, MT5634ZBA-Global, MT5 634ZBA–V.92, MT5634ZBA-V–V.92 PN S000286G, Version G Copyright This publication may not be repro duced, in whole or in pa rt, without prior expressed written permission from Multi- Tech Systems, Inc.
Table of Contents Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 3 Table of Contents Chapter 1 – Introduction ...................................................................................................... ...................
Table of Contents Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 4 Appendix G – ROHS HT/TS S ubstance Con centration ............................................................................... .............. 39 Index .......
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 5 Ch apter 1 – Int roduct ion Congratulations on your purc hase of the MultiModem ZBA modem.
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 6 Features Specific to V.92 • Speed – V.92/56K download speeds and 48 K upload speeds when connecting with V.92 server. • Fax – Class 1, 1.0, 2, and 2.1 faxing at speed s to V.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 7 C hapter 2 – Inst al lat ion This chapter shows you step-b y-step how to set up your Multi-Tech MT 5634ZBA modem. Safety Warnings • Use this product only with UL- and CUL-listed computers ( U.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 8 Location of the Jumpers Note: J8 is the Jumper for the Modem with Vo ice Option Changing the Dial-U p/Leased-Line Jumper As shipped from the factory, your modem is configur ed for normal dial-up oper ation.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 9 Step 2: Connect the Modem to Your PC Turn off your computer. Place the modem in a convenient lo cati on, and then connect it to your computer’s serial port, the telephone line or leas ed line, AC power, and, optionall y, your telephone.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 10 Connect the Modem to Your PC Plug one end of the serial cabl e into the RS232 connecto r on the modem and the other end into a serial port connector on your computer, such as COM1 or COM2.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 11 Step 3: Install the Modem Driver If you use Windows 2000 or above, you must install the modem dr iver. T he modem driver tells Windo ws ho w to control the modem.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 12 Step 4: Configure the Modem for Your Country or Region – Global Product Only Different countries have different requireme n ts for how mode ms must function.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 13 Step 5: Configure the modem for best performance With Micorsoft Operating System, you can configure your m odem using HyperT erminal.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 14 Ch apter 3 – Oper at ion About the Front Panel The LED indicators on the front panel in dica te status, configuration, and activit y: TD – Transmit Data. Flashes when the modem is transmitting data to a nother modem.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 15 PhoneTools Features With the PhoneTools communicati ons pro gram included with your modem, you ca n: • Upload and download data fil es. • Send faxes at preset times.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 16 Connecting to the Internet Your Multi-Tech modem is your gate way to the Internet and the World Wide Web. To access the Internet and Web via your modem, you must establi s h a dia l- up account with an Internet service prov id er (ISP).
Chapter 4 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 17 Ch apter 4 – A T C omm ands , S - R eg isters , and R esult Codes The AT Commands, S-Regist ers, and Res ult Codes for t he MT5634ZBA-Series Mo dems are published in a separ ate Reference Guide.
Chapter 5 – Remote Configuration Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 18 Chapter 5 – R emote Conf ig ur at ion Remote configuration is a network ma nagement tool that allo ws you to configure MT5634ZBA modem s remotely from one location.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 19 Ch apter 6 – Cal l back Securit y This chapter describes how to use callback securit y with your modem. Callback security protects your net work from unauthorized access and hel p s control long-di stanc e costs.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 20 Setting Callback Security Message Parity The modem’s parity must match the parit y of the computer to which the modem is connected. 1. Open a data communications program suc h as H yperT erminal or PhoneTools.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 21 5. After the delay specified by the #CBD n command, the callb ack modem calls the number associated with the password.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 22 Direct Connection Use this procedure when you want to connect without fi rst being called back. The pas s word that you use must be set up for an optional direct connection.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 23 Callback Assignments Form Location Password Telephone Number 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 24 Chapter 7 – Troubleshooting Your modem was thoroughly tested at the factory before it was shipped.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 25 • Your communication software settings may not match the ph ysical port to which the mod em is connected. The serial cable might be plug ged into the wrong connector— c h eck your computer documen tation to make sure.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 26 • If the modem reports NO ANSWER , the other system has failed to go off-hook, or you might have di aled a wrong number. Check the number. • If the modem reports NO CARRIER , the phone was answered at the other end, but no connectio n was made.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 27 Data Is Being Lost • If you are using data compression and a h igh speed serial por t, set the serial p ort baud rate to two to six times the data rate.
Appendix A – T echnical Specifications Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 28 Appendix A – T echnical Specif icat ions The MT5634ZBA-Series mo dem meets t he following .
Appendix A – T echnical Specifications Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 29 Receiver Sensitivity -43 dBm under worst-case conditions AGC Dynamic Range 43 dB Interface TIA/EIA RS-232C/ITU-T V.
Appendix B – Upgradi ng the Modem’s Firmware Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 30 Appendix B – Upg rading the Modem ’ s Fir m w are Your modem is controlled by semi-perm an ent software, called firmware , which is stored in flash memory.
Appendix B – Upgradi ng the Modem’s Firmware Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 31 Step 3: Download the Upgrade File 1. If you are not already at the MultiModem ZBA Firm ware page of the Multi-T ech W eb site, follo w the procedure in “Step 2: Ident ify the Current Fir mware.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 32 Appendix C – R eg ulator y Complianc e FCC Part 15 Regulation This equipment has bee n tested an d found to comply with the limits for a Class B digital devic e, pursuant to Part 15 of the FCC rules.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 33 Canadian Limitations Notice Notice: The ringer equiva le nce number (REN) assigned to each terminal device provide s an indication of the maximum number of terminals allo wed to be connected to a telep hone in terface.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 34 New Zealand Telecom Warning Notice 1. The grant of a Telepermit for any item of terminal equip ment indicates only that Te lecom has accepted that the item complies with minimum conditions for c onnection to its network.
Appendix D – Waste Electrical and Electro nic Equipment Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 35 Appendix D – W a ste Elect rical and Elect ronic Equipment WEEE (Waste El.
Appendix E – Installing a Mo dem under Linux Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 36 Appendix E – Inst al ling a Modem under Linux This appendix expl ains how to install a modem on a computer oper ating under the Red Hat Linux 6.
Appendix F – Connectin g to a Cisco Router Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 37 Appendix F – Connect ing to a Cisco R outer Connecting to a Cisco Router Console Port The console port on the Cisco IOS ® router is an asynchr onous serial port configured as data communications e qu ipme nt (DCE).
Appendix F – Connectin g to a Cisco Router Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 38 Step 3: Console Port Final Setup Send the following command string to the modem co nn ec.
Appendix G – ROHS HT /T S Substanc e Co ncentration Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 39 Appendix G – R OHS HT/TS Substance Conc ent r ation 依照中国 标 准的.
Index Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 40 Inde x A AT commands &D ........................................................................... 13 &F ................................................................
Index Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 41 T Technical Specif ications ............................................. 28 Telephone Connection .............................................................. 10 Testing the Modem .
An important point after buying a device Multitech MT5634ZBA-GLOBAL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multitech MT5634ZBA-GLOBAL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multitech MT5634ZBA-GLOBAL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multitech MT5634ZBA-GLOBAL you will learn all the available features of the product, as well as information on its operation. The information that you get Multitech MT5634ZBA-GLOBAL will certainly help you make a decision on the purchase.
If you already are a holder of Multitech MT5634ZBA-GLOBAL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multitech MT5634ZBA-GLOBAL.
However, one of the most important roles played by the user manual is to help in solving problems with Multitech MT5634ZBA-GLOBAL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multitech MT5634ZBA-GLOBAL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
