Instruction/ maintenance manual of the product MD1127 Mustang Survival
Go to page of 11
OWNER’S MANUAL MD1127 LIFE PRESERVER BY MUST ANG SURVIV AL PA3007_MD1127_23Apr99 3/13/06 9:48 AM Page 1.
T ABLE OF CONTENTS INTRODUCTION DESCRIPTION A. GENERAL B. THE MD1127 LIFE PRESERVER 1. DESIGN AND CONSTRUCTION 2. INFLA TION SYSTEM 3. INFLA TION CELL 4. F ASTENER 5. BEL T 6. MARKINGS 7. P ACKAGE OPERA TING INSTRUCTIONS A. THE BUOY ANCY CELL 1. DEFLA TING THE BUOY ANCY CELL 2.
INTRODUCTION Mustang inflatable life preservers are items of primary survival equipment, and as such, every precaution shall be tak en to assure proper storage , maintenance , and handling. The life of the wearer may well depend on the condition of the life preserver and the security of its attachments and equipment.
B. The MD1127 Life preser ver 1. Design and Construction The MD1127 incorporates a dual chamber inflatable cell, which is separated by an internal floating baf fle. The floating baffle allows either chamber to fully inflate the life preser ver . The life preser ver is styled as a protective collar fitted around the neck and front chest.
7. Package A bright yellow polyurethane coated nylon package is provided for storage purposes. The package is closed by a V elcro ® patch placed on its cover flap. This allows the package to be opened quickly in the event of an emergency . OPERA TING INSTRUCTIONS A.
Oral Inflation In the event that the CO 2 gas cylinder fails to inflate the buoyancy cell, or if the cell needs to be topped up during use, your inflatable life preser ver can be inflated by mouth through the inflation tube. T o inflate by mouth, depress the mouthpiece and blow into the tube until the cell is fully inflated.
7. Fold the top of the life preser ver towards the packer , over the folded ends; Figure 6c. 8. Slide life preser ver in this position into package bag as shown in Figure 6d. 9. Close V elcro ® patch. D. Laundering Procedures Do not dr y clean. Do not use chlorine bleach.
MAINTENANCE, INSPECTION AND TESTING PROCEDURES Y our life preser ver should be inspected and tested annually to maintain all compo- nents of the life preser ver , and its associated equipment in a ser viceable condition, and to ensure that the inflatable cell will withstand the specified pressure.
3. CO 2 Inflation V alve T est T o test the CO 2 inflation valve, operate the manual lever several times. Ensure the lever moves fully and that the piercing pin travels far enough to puncture sealing disk. Visually check to see that the piercing pin is in place, and protrudes sufficiently .
C. Repairs All repairs shall be conducted only by fully qualified, authorized technicians. Do not attempt to repair or replace any item or part of your life preser ver . Return all damaged life preser ver for repair to the Mustang Dealer where the item was purchased.
WE SA VE LIVES FOR A LIVING MUST ANG SURVIV AL CORP . T elephone: 1-800-526-0532 Email: custserv@mustangsurvival.com www .mustangsurvival.com P A3007 (Rev05Mar2012).
An important point after buying a device Mustang Survival MD1127 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mustang Survival MD1127 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mustang Survival MD1127 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mustang Survival MD1127 you will learn all the available features of the product, as well as information on its operation. The information that you get Mustang Survival MD1127 will certainly help you make a decision on the purchase.
If you already are a holder of Mustang Survival MD1127, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mustang Survival MD1127.
However, one of the most important roles played by the user manual is to help in solving problems with Mustang Survival MD1127. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mustang Survival MD1127 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center