Instruction/ maintenance manual of the product 405FX-ST N-Tron
Go to page of 16
(Revised 2010- 11 - 15 ) 1 400 Series Industrial Et hernet Switch es Installation Guide.
(Revised 2010- 11 - 15 ) 2 Industrial Ethe rnet Switch Insta llation Guide 405TX 405FX- SC 405FX- ST 405FXE- SC - YY 405FXE- ST - YY Where: YY = -15, -40, or -80.
(Revised 2010- 11 - 15 ) 3 Copyright, © N- TR ON Corp., 2008 820 S. University Blvd., Suite 4E Mobile, AL 36609 USA All rights reserved. Reproduction, adaptation, or translation without prior written permission from N -TRON Corp. is prohibited, except as allowed under copyright laws.
(Revised 2010- 11 - 15 ) 4 Safety Warnings ELECTRICAL SAFETY WARNING: Do not disconnect while circuit is live, unless area is known to be non-hazardous. WARNING: Disconnect the power cable before removing the enclosure top. WARNING: Do not operate the unit with the top cover removed.
(Revised 2010- 11 - 15 ) 5 405FX, 405FXE, & 405TX Industrial Ethernet Switches The 405TX and 405FX Unmanaged Industrial Etherne t Switches support high speed la yer 2 switching between ports. The 405TX is an affordable 5 port unmanaged switch that is capable of auto negotiating 10/100 Mb and half/full duplex communications.
(Revised 2010- 11 - 15 ) 6 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 405FX/405FXE/405TX Ethernet Switch 2.
(Revised 2010- 11 - 15 ) 7 405FX/405FXE H ALF DUPLEX SETUP While all RJ45 ports are Autosensing, the 405FX/405FXE Fiber Optic Port is factory configured for full duplex operation. In the event half duplex operation is desired, follow these steps: 1. Remove the Voltage Input Power Plugs.
(Revised 2010- 11 - 15 ) 8 DIN-Rail Mounting Install the unit in a standard D IN- Rail. Recess the unit to allow at least 5” of horizontal clearance for fiber optic cable bend radius (2” for TX models). Note: This unit may be mounted horizontally or verticall y.
(Revised 2010- 11 - 15 ) 9 FRONT PANEL From Left to Right: LNK Link LED for Fiber Optic Port (405FX/FXE only) TX Fiber Optic Transmit Port (405FX/FXE Only) RX Fiber Optic Receive Port (405FX/FXE Only).
(Revised 2010- 11 - 15 ) 10 LED’s: The table below describes the operating modes: LED Color Description GREEN Power is Applied OFF Power is OFF ! RED Controller HW Error OFF No Errors.
(Revised 2010- 11 - 15 ) 11 N-TRON SWITCH GROUNDING TECHNIQUES The grounding philosophy of any control system is an integral part of the design. N -Tron switches are designed to be grounded, but the user has been given the flexibility to float the switch when r equired.
(Revised 2010- 11 - 15 ) 12 RJ45 CONNECTOR CRIMP SPECIFICATIONS Please reference the illustration below for your Cat5 cable spe cifications:.
(Revised 2010- 11 - 15 ) 13 CONNECTING THE UNIT For 405 FX & 405FXE units, remove the dust cap from the fiber optic connect ors and connect the fiber optic cables. The TX po rt on the 405 FX should be connected to the RX port of the far end station.
(Revised 2010- 11 - 15 ) 14 KEY SPECIFICATIONS Physical Height: 2.13" (5.41 cm) Width: 5.00" (12.70 cm) Depth: 3.00" (7.62 cm) Weight: ~ 1.2 lbs. (0.6 kg) (Note: can be mounted horizontally or vertically) Electrical Input Voltage: 10-30 VDC (Regulated) Input Current: 220mA max.
(Revised 2010- 11 - 15 ) 15 Regulatory Approvals: Safety: Suitable for use in Class I, Division 2, Groups A, B, C, and D Hazardous Loc ations, or Non-hazardous locations only. EMI: EN55022 – Class A FCC Part 15 Class A EMS: EN55024:1998 EN61000-4-2:1995 EN61000-4-3:1997 EN61000-4-4:1995 EN61000-4-5:1995 EN61000-4-6:1996 GOST- R Certified.
(Revised 2010- 11 - 15 ) 16 N-TRON Limited Warranty N-TRON, Corp. warrants to the end user that t his hardware product will be fr ee fro m d efects in w ork manship and materials, under nor mal use a nd service, for the applicab le w arranty period fro m the date of purchase from N -TRON or its authorized reseller.
An important point after buying a device N-Tron 405FX-ST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought N-Tron 405FX-ST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data N-Tron 405FX-ST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, N-Tron 405FX-ST you will learn all the available features of the product, as well as information on its operation. The information that you get N-Tron 405FX-ST will certainly help you make a decision on the purchase.
If you already are a holder of N-Tron 405FX-ST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime N-Tron 405FX-ST.
However, one of the most important roles played by the user manual is to help in solving problems with N-Tron 405FX-ST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device N-Tron 405FX-ST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
