Instruction/ maintenance manual of the product Mini-Mixer MM-15USB Nady Systems
Go to page of 12
MM-15USB Mini mixer Owner’ s Manual .
2 Features ........................................................................................ 2 W arning ........................................................................................ 3 Installation ............................
3 A TTENTION : RISQUE DE CHOC ELECTRIQUE NE P AS OUVRIR An equilater al triangle enclosing a lightning flash/arr owhead symbol is intended to alert the user to the presence of uninsulated “danger ous voltage” within the pr oduct ’ s enclosur e which may be of suf ficient magnitude to constitute a risk of electric shock.
4 INST ALLA TION T o ensure years of enjoyment from your NADY AUDIO MM-15USB mixer , please read and understand this manual thoroughly before using the unit. 1. INSPECTION Y our NADY AUDIO MM-15USB was carefully packed at the factory in packaging designed to protect the units in shipment.
5 Contr ols & Connections 1. CHANNEL SECTION (1) MIC INPUT This electronically balanced XLR input is designed to accept signals from any balanced or unbalanced low impedance (Low Z) microphone. The XLR jack is configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative (-).
6 Contr ols & Connections (6) EQUALIZER CONTROLS All channels are fitted with a three-band EQ - HIGH, MID, and LOW . All three bands have up to 15 dB of cut and boost, with a center detent for OFF . The frequency response is flat when all three EQ knobs are in the center detent position.
7 Contr ols & Connections 2. MAIN CONTROL SECTION (13) PHANTOM POWER When this switch is depressed, +48V of phantom power will be supplied to the XLR mic inputs to power condenser microphones. The phantom power LED will illuminate when the switch is depressed to ON.
8 Contr ols & Connections 3. MASTER INPUT / OUTPUT SECTION (23) AUX SEND The Aux Send jack provides a mono mixed signal from the input channels, which can be connected to an external effects unit or other devices. The signal is adjusted by the channel Aux Send (7) controls of each channel and is post channel level control.
9 4. REAR P ANEL (30) RECORD OUT The Record Out Left and Right RCA jacks provide signal output to recording devices, home audio equipment, or external amplifiers. These outputs take the signal from the Main bus, the Aux Send bus, or a combination of both depending on the positions of the Main T o Rec/USB (15) and Aux T o Rec (16) switches.
10 Specica tions BALANCED XLR MIC INPUTS CH. 1-2 Maximum T otal Gain (EQ’ s @ mid): +63dB Maximum Input: +6.5dBu Input Impedance: 1.2kΩ Sensitivity: -53dBu BALANCED TRS LINE INPUTS CH. 1-2 Maximum total gain (EQ’ s @ mid): +42dB Maximum Input: +17dBu Input Impedance: 15kΩ Sensitivity: -33dBu BALANCED MONO/STEREO ¼” LINE INPUTS CH.
1 1 Notes .
Service For Y our NADY AUDIO Product (U.S.) Should your NADY AUDIO product require service, please contact the NADY Service Department via telephone at (510) 652-241 1 , or e-mail at service@nady .com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
An important point after buying a device Nady Systems Mini-Mixer MM-15USB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems Mini-Mixer MM-15USB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems Mini-Mixer MM-15USB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems Mini-Mixer MM-15USB you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems Mini-Mixer MM-15USB will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems Mini-Mixer MM-15USB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems Mini-Mixer MM-15USB.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems Mini-Mixer MM-15USB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems Mini-Mixer MM-15USB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center