Instruction/ maintenance manual of the product PCL815 Nady Systems
Go to page of 8
RACK LIGHTS POWER CONDITIONER & LIGHT MODULE 1800 WA TTS CAPACITY PULL PULL MIN MAX OVER VOLT AGE STANDARD VOLT AGE DIMMER REAR OUTLETS ON OFF .
Congratulations! PCL Series Power Conditioners For advanced RF/EMI noise filtering and the quietest operation of your equipment... • T riple mode varistor surge and spike protection • Eight rear outlets (with room for 4 “wall warts”) controlled by a front panel switch • 15 amp rating (1800 W) with rear panel circuit breaker (UL) • T wo added front panel slide-out, swiveling lights for rack illumination and dimmer controls to adjust lamp brightness (PLC-810 and PLC-815 only) • Large LED numeric meter that displays incoming AC line voltage and 2 voltage condition indicators- standard voltage and over voltage (PLC-815 only) • Rugged single rack space metal housing for maxi- mum reliability Date of Purchase Dealer’ s Name City State Zip Model# Serial # Y ou have purchased on of the finest professional power conditioners on the market today .
Controls, functions, and connections FRONT P ANEL 1. POWER SWITCH Outlet switch (with built-in LED ON indicator) activates protection and filtration to all back panel outlets. T o turn the unit ON or OFF , press the upper or lower portion of this button.
REAR P ANEL 7. POWER CORD Heavy duty 14-guage power cord for connection to the AC power mains (~115V/60Hz) 8. CIRCUIT BREAKER Resettable 15 amp thermal circuit breaker 9.
6 1. The PCL Series conditioners are the perfect accessories for any rack mount system. Install in the top slot of a standard 19-inch rack, and the 8 switched AC outlets on the rear panel will provide full safety protection to all your rack equipment.
Specifications PROTECTION PROVIDED High voltage varistor surge and transient suppressor , RFI/EMI interference filtration OUTLET CONNECTORS 8 standard 3-prong grounded AC receptacles POWER CONSUMPTION Maximum 1800W/15A load POWER SOURCE ~120V AC/60 Hz CIRCUIT BREAKER 15A thermal type LAMPS (PCL-810/815) 5W (two) DIMENSIONS 19” X 1.
An important point after buying a device Nady Systems PCL815 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems PCL815 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems PCL815 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems PCL815 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems PCL815 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems PCL815, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems PCL815.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems PCL815. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems PCL815 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center