Instruction/ maintenance manual of the product LCD3215 NEC
Go to page of 34
User ’ s Manual MultiSync LCD3215 MultiSync LCD4215.
Index Important Information .......................................................................................................... ......................... English-1 W arning, Caution ..............................................................
English-1 English Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED.
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 Contents Power Cord* 1 Setup Manual V ideo Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) Wireless Remote Control and AAA Batteries Clamp x 2 Y our new MultiSync monitor box* should c.
English-5 English This de vice cannot be used or installed without the T ab letop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized service person.
English-6 Attaching Mounting Accessories The display is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. Mounting accessories can be attached with the monitor in the face down position.
English-7 English 7 DOWN ( ) button Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select adjustment items within OSD menu. 8 EXIT button Activates the OSD menu when the OSD menu is turned-off.
English-8 T erminal Panel 8 AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3 jack to an external device (stereo receiver , amplifier , etc.). 9 VIDEO INPUT/OUTPUT Connector VIDEO IN connector (BNC and RCA): To input a composite video signal.
English-9 English 8 PIP (Picture In Picture) button ON/OFF button: T oggle switches between PIP and POP . See page 22. INPUT button: Selects the “picture in picture” input signal.
English-10 Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor ’s remote sensor during button operation.
English-11 English 1. Determine the installation location CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.
English-12 5. Switch on the power of all the attached external equipment When connected with a computer , switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required.
English-13 English Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment.
English-14 Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and a pixel clock over 165MHz may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically .
English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector DVI-D connector To DVI output To audio output Connect the LCD Monitor to a Computer with a Digital Output • The RGB1 connector also accepts a DVI-D cable.
English-16 Connect the LCD Monitor to a DVD Player •T o connect the DVD/HD IN connector (BNC) on the LCD monitor , use an BNC connector cable (sold separately). Some DVD players may have different connectors such as DVI-D connector . Select [DVI/HD] mode from the “DVI MODE” menu.
English-17 English Connect the LCD Monitor to a Stereo Amplifier •T urn on the LCD monitor and the amplifier only after all connections have been made. • Use a stereo Mini-RCA cable to connect the AUDIO OUT connector (Stereo Mini Jack) on the LCD monitor to the audio input on the amplifier .
English-18 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered of f. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD.
English-19 English Picture Mode RGB1, RGB2, RGB3 ST ANDARD sRGB HIGHBRIGHT DVD/HD, VIDEO(S) ST ANDARD CINEMA HIGHBRIGHT NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. DYNAMIC: Expands a 4:3 pictures to fill the entire screen with non-linearity .
English-20 OSD (On-Screen-Display) Controls Press MENU button to open Main menu. Press SET Button to enter next menu to adjust. Press Up, Down or “+”, “-” button to select function, or setting to be adjusted. Press MENU or EXIT button to exit.
English-21 English Setting Default BRIGHTNESS Adjusts the overall image and background brightness. CONTRAST Adjusts the image brightness in relation to the input signal. NOTE: sRGB picture mode is standard and cannot be changed. SHARPNESS Adjusts the crispness of the image.
English-22 CUSTOM ZOOM “CUSTOM ZOOM” will be selected when you select “CUST OM” on the screen “ZOOM” mode. ZOOM Expands the horizontal and the vertical size simultaneously . H ZOOM Expands the horizontal size only . V ZOOM Expands the vertical size only .
English-23 English IR CONTROL Selects the infrared wireless remote controller mode. The item in this menu will become effective by pressing “SET” button on the selected item. NORMAL The monitor will be controlled normally by wireless remote controller .
English-24 DVI MODE Selects the kind of DVI-D equipment which is connected RGB1. INPUT RGB1 only Selects “DVI-PC” when PC or other computer equipment is connected. Selects “DVI-HD” when DVD player , which has DVI-D output, is connected. SCAN CONVERSION Selects IP (Interlace to Progressive) converter function.
English-25 English NOTE 1: CREA TING A SCHEDULE Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.
English-26 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
English-27 English Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards.
English-28 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English-29 English Specifications - LCD3215 Product Specifications LCD Module 32"/80.0 cm diagonal Pixel Pitch: 0.51 1 mm Resolution: 1366 x 768 dots Color: Over 16 million colors (depending on video card used) Brightness: 500 cd/m 2 (T yp.
English-30 Specifications - LCD4215 Product Specifications LCD Module 42"/106.6 cm diagonal Pixel Pitch: 0.681 mm Resolution: 1366 x 768 dots Color: Over 16 million colors (depending on video card used) Brightness: 500 cd/m 2 (T yp.
English-31 English Pin Assignment 1) Analog RGB input (MiniDsub15p): VGA Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4G N D 5 DDC-GND 6 Red-GND 7G reen-GND 8 Blue-GND 9 +5V.
English-32 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
An important point after buying a device NEC LCD3215 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC LCD3215 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC LCD3215 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC LCD3215 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC LCD3215 will certainly help you make a decision on the purchase.
If you already are a holder of NEC LCD3215, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC LCD3215.
However, one of the most important roles played by the user manual is to help in solving problems with NEC LCD3215. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC LCD3215 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
