Instruction/ maintenance manual of the product D3mmmXL Asko
Go to page of 12
Page 1 A A A A A UT UT UT UT UT OMA OMA OMA OMA OMA TIC HIGH L TIC HIGH L TIC HIGH L TIC HIGH L TIC HIGH L OOP OOP OOP OOP OOP T T T T T he dr he dr he dr he dr he dr ain hose is f ain hose is f ain h.
Page 2 TOOLS TOOLS TOOLS TOOLS TOOLS 1 ) Phillips No. 2 screwdriver 2 ) Flat blade screwdriver 3 ) T orx screwdriver size T 20 4 ) Adjustable wrenches (if you use copper fittings) 5 ) Open-ended wrenc.
Page 3 UNIT DIMENSIONS UNIT DIMENSIONS UNIT DIMENSIONS UNIT DIMENSIONS UNIT DIMENSIONS U S Metric Measurements Measurements Height 34" - 37" 864 - 939 mm Width 24" 610 mm Depth 23-5/8&q.
Page 4 W ARNING! Plumbing connections must comply with applicable sanit ary , safety and plumbing codes in your area. The machine can be connected to either a hot or cold water supply . If a cold water supply is used, the washing times will be longer but the performance will not be affected.
Page 5 ASKO provides a 7/8” (22 mm) corregated drain hose which is connected to the back of the unit to form a high loop. If additional drain hose is the added hose and any joints or connections can be no smaller than 7/8" O.D. S tock. NOTE: Do not use any fittings anywhere in the drain line that are less than 7/8" (22 mm) O.
Page 6 WARNING! Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box. WARNING! Disconnect electrical power supply and place a tag at the disconnect switch indicating that you are working on the circuit.
Page 7 WARNING! Make sure you put the protective slides on the legs to prevent damaging the floor when you slide the unit into place (see page 6). 1 . Position the machine in front of the cabinet opening. 2. Make the height adjustment while the dishwasher is in front of the opening.
Page 8 TESTING FOR LEAKS TESTING FOR LEAKS TESTING FOR LEAKS TESTING FOR LEAKS TESTING FOR LEAKS 1. Turn on the water supply and check for leaks. 2. Turn the power on at breaker/fuse box and test the dishwasher operation by running a Rinse cycle. (This should take about four minutes.
Page 9 Now that all the connections are made and the machine is in place under the cabinet, you should make the final height adjustment. 1 . Y ou should set the rear foot first. T o do this, use a screwdriver to rotate the adjusting screw on the bottom front of the machine.
Page 10 FITTING THE FITTING THE FITTING THE FITTING THE FITTING THE D3252XLFI, D3532XLFI AND D3532XLFIWS D3252XLFI, D3532XLFI AND D3532XLFIWS D3252XLFI, D3532XLFI AND D3532XLFIWS D3252XLFI, D3532XLFI .
Page 11 4-inc 4-inc 4-inc 4-inc 4-inc h h h h h T T T T T oe Kic oe Kic oe Kic oe Kic oe Kic k Installa k Installa k Installa k Installa k Installa tions tions tions tions tions Custom panel extends to cabinet top One installation option for a 4” toe kick is to extend the custom panel to the cabinet top (as illustrated below).
Page 12 A A A A A Access holes 3 C C C C C Cabinet, fastening unit to 9 Cabinet opening dimensions 3 Connecting to water supply 9 Corner installation 4 Cosmetic damage 2 D D D D D Dimensions, unit 3 D.
An important point after buying a device Asko D3mmmXL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asko D3mmmXL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asko D3mmmXL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asko D3mmmXL you will learn all the available features of the product, as well as information on its operation. The information that you get Asko D3mmmXL will certainly help you make a decision on the purchase.
If you already are a holder of Asko D3mmmXL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asko D3mmmXL.
However, one of the most important roles played by the user manual is to help in solving problems with Asko D3mmmXL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asko D3mmmXL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
