Instruction/ maintenance manual of the product USB DVI KVM Network Technologies
Go to page of 22
MAN007 Rev Date 1/04/2008 UNIMUX-DVI- x USB DVI KVM Switch Installation and Operation Manual UNIMUX TM Series NET WO RK TECH NOL OGIES IN CO RPO RA TED Te l:33 0-5 62 -70 70 Fax :33 0-5 6 2-1 999 1275 D an ner Dr Aurora, OH 44202 www.netwo rkt echinc.
i TRADEMARK UNIMUX is a trademark of Net work Technologi es Inc in the U.S. and other countries COPYRIGHT Copyright © 2000,2008 by Network Technolo gies Inc.
ii TABLE OF CONTENTS INTRODUCTION ................................................................................................................... .......................................... 1 MATERIALS ..............................................
NTI UNIMUX SERIES USB KVM SWITCH 1 INTRODUCTION The UNIMUX-DVI-x 4,8 or 16-Port USB DV I KVM switch (UNIMUX) allows access to up to sixteen (16) Windows, MAC, or SUN USB CPUs from one USB keyboard and mo use and a DVI video-enabled monitor. Internal microproc essor circuitry allows all USB CPUs to be booted simultaneousl y without keyboard error.
NTI UNIMUX SERIES USB KVM SWITCH 2 MATERIALS Materials supplied with this kit : • NTI UNIMUX-DVI-x (4,8 or 16 ports) USB DV I Video KVM Switch • 120VAC or 240VAC at 50 or 60Hz-5V DC/2.
NTI UNIMUX SERIES USB KVM SWITCH 3 FEATURES AND FUNCTIONS 1. CPU Status LEDs - for visual indication of connectio n between the user and a specific CPU. 2. CPU Select Switches - push to manua lly switch to a specific CPU or change the s witch operating mode 3.
NTI UNIMUX SERIES USB KVM SWITCH 4 RACKMOUNTING INSTRUCTIONS This NTI switch was designed to be mou nted to a rack or to se t on a desktop. It includes rackmount ears to make attachment to a rack easy, and rubber feet to be appli ed to the bottom of the case if it will instead sit on a flat surface.
NTI UNIMUX SERIES USB KVM SWITCH 5 INSTALLATION 1. It is not necessary to turn the CPUs or monitors OFF during th is installation. 2. Connect a HDMI-to-DVI cable (supplied) from a DVI monitor to the HDMI connector label ed wi th a monitor symbol ( ) on the front of t he UNIMUX (See Fig.
NTI UNIMUX SERIES USB KVM SWITCH 6 5. Connect each CPU to the USB switch using a DVI-HDMI-MM-x (x=3, 6, 10, or 15 foot) cable for each video connecti on and a USB-AB-yM (y= .5, 1, 2, 3, or 5 meters) for eac h input device connecti on – REQUIRED (not supplied).
NTI UNIMUX SERIES USB KVM SWITCH 7 RS232 Connection If the RS232 option is installed, connect one end of the CAT 5 patch cable (supplied) to the port labeled “RS232” on the rear of the UNIMUX.
NTI UNIMUX SERIES USB KVM SWITCH 8 Power-Up Sequence • Power-up the monitor(s). • The UNIMUX can be po wered at any time. Note: It is recommended that the monitor be powered-ON before powering on the UNIMU X in order for DDC information to be properly communic ated.
NTI UNIMUX SERIES USB KVM SWITCH 9 USING THE UNIMUX DVI KVM SWITCH Once the UNIMUX is properl y connected, the UNIMUX will enable a connection to b e made between the CPUs attached to its VIDEO and CPU ports and the monitor and input dev ices attached to the MONITO R and USB Device ports.
NTI UNIMUX SERIES USB KVM SWITCH 10 Selects a specific port Configure port to connect To a MAC CPU Configure port to connect To a WINDOWS or SUN CPU Exit Command Mode Scan Mode When in Scan Mode the switch scans to each port with a CPU po wered-ON. (The SCAN LED on the front panel will illuminate and remain ON while in Scan Mode.
NTI UNIMUX SERIES USB KVM SWITCH 11 Select Country Code It is possible to configure the UNIMUX to em ulate a sp ecific international Sun ke yboard regardless of what actual keyboard is connected. This is recommended when the CPU needs the la yout code (i.
NTI UNIMUX SERIES USB KVM SWITCH 12 RS232 CONTROL (Optional) RS232 enables the UNIMUX to be remotely controlled via RS232. To control the UNIMUX vi a RS2 32 the user has three options: • write a pro.
NTI UNIMUX SERIES USB KVM SWITCH 13 DIP SWITCH UNIT ADDRESS 8 7 6 5 OFF OFF OFF OFF 0 (not va lid) OFF OFF OFF ON 1 (default) OFF OFF ON OFF 2 OFF OFF ON ON 3 OFF ON OFF OFF 4 OFF ON OFF ON 5 OFF ON O.
NTI UNIMUX SERIES USB KVM SWITCH 14 Command Protocol RS232 commands supported by the unit are defin ed below. All command strings sho uld be terminated with a <CR> (carriage return). When a command is sent, the entire string is echoed back along with a response from the addressed unit as sho wn in the command definitions.
NTI UNIMUX SERIES USB KVM SWITCH 15 NTI Switch Control Program For Windows 9X, NT, 2000, XP, And Vista The NTI Switch Control Progr am is an easy and po werful graphic al program that controls NTI switches through an RS232 interface. The NTI Switch Control Program is inclu ded on the CD packaged with the UNIMUX.
NTI UNIMUX SERIES USB KVM SWITCH 16 8) Change Volume for Audio Output/User (not applicab le to this model) - change Audio port output vol ume 9) Read Connection for Output/User - read what input is co.
NTI UNIMUX SERIES USB KVM SWITCH 17 KEYBOARD FEA TURES The keyboard configuration o f each CPU is saved in the UNIMUX. For example, if the CPU attached to Port 2 had CAPS LOCK and NUM LOCK selected the last time that CPU was accessed, t hen they will automaticall y be set when that CPU is accessed again.
NTI UNIMUX SERIES USB KVM SWITCH 18 Figure 14- Keyboard Layouts International Sun Keyboards The UNIMUX can recognize international l ayouts for Sun keyboard s. In order to use an internati onal Sun keyboard, follo w t his procedure: 1. Pow er-OFF the CPU from the UNIMUX 2.
NTI UNIMUX SERIES USB KVM SWITCH 19 TROUBLESHOOTING PROBLEM: Keyboard Errors SOLUTION: Check cable connections on each CPU and the switch. PROBLEM: No Video SOLUTION: Check cable connections on each CPU and the switch. Ve rify that keyboard and vide o connect from each CPU to matching ports.
An important point after buying a device Network Technologies USB DVI KVM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies USB DVI KVM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies USB DVI KVM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies USB DVI KVM you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies USB DVI KVM will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies USB DVI KVM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies USB DVI KVM.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies USB DVI KVM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies USB DVI KVM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
