Instruction/ maintenance manual of the product KT-10FV2 Nikon
Go to page of 2
Features Complies with IEEE 802.3 10Base-FL standard. A complete interface of the AUI to fiber optic cable link. Flexible selection for half-duplex or full-duplex mode Supports data transfer rate up to 20Mbps for full-duplex Capability for driving the fiber optic cable segment up to 2000M (6560 ft.
Interpreting LED Indicators There are four diagnostic LED indicators provided on the transceiver to indicate the operation status as below: LED Operation status State Interpretation Link Cable link status On The cable link is ok O f f No cable link or the link is faulty .
An important point after buying a device Nikon KT-10FV2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nikon KT-10FV2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nikon KT-10FV2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nikon KT-10FV2 you will learn all the available features of the product, as well as information on its operation. The information that you get Nikon KT-10FV2 will certainly help you make a decision on the purchase.
If you already are a holder of Nikon KT-10FV2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nikon KT-10FV2.
However, one of the most important roles played by the user manual is to help in solving problems with Nikon KT-10FV2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nikon KT-10FV2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center