Instruction/ maintenance manual of the product DIGITAL X OVER Nilfisk-ALTO
Go to page of 20
LTO R www .altoproaudio.com English User's Manual L TODRIVE3.4 3 W A Y STEREO DIGIT AL X O VER V ersion 1.2 Januar y 2003.
1 SAFETY RELA TED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Protective Grounding Make sure to connect the protective grounding to prevent any electric shock before turning ON the apparatus. Never cut off the internal or external protective grounding wire or disconnect the wiring of protective grounding terminal.
2 Dear Customer: PREF ACE Thanks for choosing L T ODRIVE3.4 and thanks for choosing one of the results of L T O AUDIO TEAM job and researches. For our L T O AUDIO TEAM , music and sound are more than a job.
3 T ABLE OF CONTENTS 1. INTRODUCTION .......................................................................................... ..........4 ........ 2. FEA TURE LIST .....................................................................................
1. INTRODUCTION 2. FEA TURE LIST Single Rack Unit Robust and Compact Design 24 32-bit High Speed Signal Processor Open Architecture for Easy Software Updates Windows Editor for Easy to Use and Powerful Pc Based MIDI Remote Control 5 Parametric EQ for Each Channel Band Pass Filter Available (Until 24dB/Oct) for Each Output Channel Up to 0.
3.2.The Rear Panel Inputs(14) These are XLR balanced connectors which connect to sources such as the channel inserts on mixing consoles. They may be used with nominal input levels f om consumer to professional audio.
6 4.2.Operational Overview At system startup the following splash screens will be shown on the graphic display . The L T ODRIVE is booting and initializing its hardware and software, loading the last used preset and the user interface. The process lasts a few seconds, afterwards the system goes to the Utility Menu (Utility Led is ON).
7 T o save a preset it is necessary to select the Preset item; using the dial it is possible to choose the desired preset number , to be confirmed pressing the Enter key . After data saving, a character string (preset name) will be shown to the user for editing (max 8 chars).
8 1/1 P ASSW ORD 000000 PRESET 01 NEW P ASSW ORD T o have complete access to the system, the fields P ASSWORD and NEW P ASSWORD must match. If the user wants to restrict system access, it is sufficient to change the P ASSWORD field. In this condition the user is not able to access UTILITY functions, except the P ASSWORD screen.
9 This function allows to configure the signal input/output path: 1/1 indicates the number of page; when it's selected it is possible to get back to the main menu pressing the Esc key . With the Up/Down keys it is possible to select the inputs and the outputs sequentially .
10 This graphic screen shows the frequency response of the channel. Use Up/Down/Left/Right keys to select one of the five fields: Page Number , Filter Number , Gain, Frequency , Bandwidth. The selected value can be changed by means of the dial. The selected filter's frequency will be shown by a vertical segment on the display (see above).
11 This graphic screen shows the frequency response of the channel. Use Up/Down/Left/Right keys to select one of the five fields: Page Number , Filter Number , Gain, Frequency , Bandwidth. The selected value can be changed by means of the dial. The selected filter's frequency will be shown by a vertical segment on the display (see above).
12 Use Up/Down/Left/Right keys to select one of the five fields: Page Number , Polarity , Limiter Threshold, Limiter Release, Limiter Attack; the selected values can be changed by means of the dial. T o access the precedent page select page number and press Esc.
13 5.2. L TODRIVE3.4 2-W ay Input, 6- Way Output (High, High, Low , Low , Sub, Sub Level) If you want to present your L T ODRIVE3.4 in a 2-way input, 6-way output (high, high, low , level) low , sub, sub please connect the unit to your system as the following illustration step by step: application, 1.
Parameter Controller V alue setting Legend B a n k 0 0 ,1 ,2 Mode Channel Mode Channel 22 22 0, 1 2, 3, 4, 5, 6, 7 Input Left, Input Right Output 1, 2, 3, 4, 5, 6 Output V olume 7 0,..., 48 Select Mode Channel 12 / 12 dB High Pass Filter High Pass Filter 17 17 0,.
3. After MIDI use of AL T ODRIVE3.4 it's advisable to run a manual STORE to save preset changes done by means of the external controller . After saving, reboot the AL TODRIVE3.4 to use it as a stand-along unit. 4. When setting and resetting mutes (controller 23) by MIDI, the relative LEDs are NOT actived.
7.TECHNICAL SPECIFICA TIONS Input Channel Digital Input Gain /+ 12 dB / step 0.5 dB 4 Parametric Filters Gain /+ 15 dB / step 0.5 dB Freq 20 Hz 20 KHz step 1/12 oct BandWidth 0.05 oct 3 oct / step 0.05 oct Delay line Up to 512 ms minimum step 21us Output Channel Digital Out V olume /+ 12 dB / step 0.
17 Power Supply Connector type 3 poles DIN (female) Ty p e Servo controlled, Switching fuse 210 240V : T250mAL 250V AC 95 120V : 500mAL 250V AC AC Input 95 240V~60 50Hz rated power consumption 15W Use.
8. W ARRANTY 1. W ARRANTY REGISTRA TION CARD T o obtain W arranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date.
SEKAKU ELECTRON IND. CO., L TD NO.1, LANE 17, SEC. 2, HAN SHI WEST ROAD, T AICHUNG, 401 T AIWAN http://www .altoproaudio.com T el:886-4-22313737 email: alto@altoproaudio.com Fax:886-4-22346757 All rights reserved to AL T O. All features and content might be changed without prior notice.
An important point after buying a device Nilfisk-ALTO DIGITAL X OVER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO DIGITAL X OVER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO DIGITAL X OVER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO DIGITAL X OVER you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO DIGITAL X OVER will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO DIGITAL X OVER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO DIGITAL X OVER.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO DIGITAL X OVER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO DIGITAL X OVER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
