Instruction/ maintenance manual of the product Samsung ML-3050 Oasis Concepts
Go to page of 8
Samsung ML-3050 / Dell 1815dn MFP 1 Samsun g ML-3050 / Del l 1815dn MFP Reference Informatio n: OEM Cartridge Yield @ 5% Tools R equired Standard 4000 Phillips Screwdriv er High Yiel d 8000 Small Flathead Screwdriver Needle Nose Pliers Supplies Required Toner Drum W iper Blade Chip 1.
Samsung ML-3050 / Dell 1815dn MFP 2 3. Using a sm all flathead screwdriver, depress the locking tab to release the contact s ide end cap (Fig. 3). Fig. 3 4. Pry off the contac t side end cap using a flathead screwdriver (Fig 4). Fig. 4 5. Contact end cap configuration (F ig.
Samsung ML-3050 / Dell 1815dn MFP 3 7. Using a Phillips screwdriver, remove the three screws on the gear side end cap (F ig. 7). Fig. 7 8. Using a sm all flathead screwdriver, depress the locking tab on the gear side end cap (Fig. 8). Pry off the end cap as in step 4.
Samsung ML-3050 / Dell 1815dn MFP 4 11. Toner and waste hopper separated (Fig. 11). Fig. 11 13. Use needle nose pliers to remove the developer roller end cap (Fig. 13). Fig. 13 14. Slide the developer roller drive gear off the developer roller shaft and out of the housing end (Fig.
Samsung ML-3050 / Dell 1815dn MFP 5 15. Slide the deve loper roller to the left (1), then right and out of the hopper section (2). Clean the developer roller w ith compr essed air and vacuum. Clean with a cloth and Isopropyl Alcohol if necessary (Fig 15).
Samsung ML-3050 / Dell 1815dn MFP 6 19 . Pull the drum axle out towards the direction of the OPC drum drive gear (grey colored gear) (Fig. 19). Note: During reassembly, r einsert the drum axle into the co ntact side (th in black gear side) to alleviate damagin g the contact inside the drum.
Samsung ML-3050 / Dell 1815dn MFP 7 To reach all off ice in the US & Canada call (800) 322 -8992 23. The chip is located on the center of the waste hopper. Use a sm all flathead screwdriver to snap off the two ultrasonic wel d pins holding the chip cover in place (Fig.
Samsung ML-3050 / Dell 1815dn MFP 8 © 1998 Oasis Imaging Products, Inc. Any attempt to repro duce any part of these instructions without the w ritten consent of Oasis Imaging Pro ducts, Inc. may result in legal action. All registered tra demarks are the prop erty of their respective o wn ers.
An important point after buying a device Oasis Concepts Samsung ML-3050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oasis Concepts Samsung ML-3050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oasis Concepts Samsung ML-3050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oasis Concepts Samsung ML-3050 you will learn all the available features of the product, as well as information on its operation. The information that you get Oasis Concepts Samsung ML-3050 will certainly help you make a decision on the purchase.
If you already are a holder of Oasis Concepts Samsung ML-3050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oasis Concepts Samsung ML-3050.
However, one of the most important roles played by the user manual is to help in solving problems with Oasis Concepts Samsung ML-3050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oasis Concepts Samsung ML-3050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
