Instruction/ maintenance manual of the product 4/16 Token Ring Fiber Converter OmniHawk Omnitron Systems Technology
Go to page of 8
________________________________________________________________________ OmniHawk™ 4/16 Token Ring Fiber Converter User’s Manual ___________________________________________________ 27 Mauchly, Sui.
SAFETY CONSIDERATIONS WARNING The instructions in this User Manual are for use by qualified personnel only. To avoid electrical shock, do not perform any servicing of this unit or the power supply module, other than that contained in the operating instructions, unless you are qualified and certified to do so by OST .
OmniHawk™ 4/16 Token Ring Fiber Converter USER’S MANUAL GENERAL DESCRIPTION The OmniHawk™ 4/16 Token Ring fiber converter provides a solution to heterogeneous Token Ring media environments. Conversions between copper (CAT-5 or Type 1) and fiber optic interfaces are required in most modern Token Ring installations.
CONNECTORS, SWITCHES & INDICATORS CONNECTORS The OmniHawk™ has three interface connectors: a fiber optic transmitter and receiver pair, an RJ45 jack, and a DB9 male connector. The DB9 connector and the chassis are designed to attach directly to the rear of a workstation network interface card.
The bottom left LED is yellow / red, the remaining three LEDs are yellow / green. The meaning of the LEDs are shown on the cover of the OmniHawk™ and in the tables below.
The operational modes are: 1. AUTOMATIC SENSING 2. UTP/STP —> RO or STATION 3. UTP/STP —> RI or LOBE The power / error LED turns red when an attachment error occurs. An error can only occur when attaching to active devices (devices which signal for insertion with phantom current or the fiber optic key).
POWER-ON LED TEST Every time power is newly applied to the OmniHawk™ the LEDs will flash through all possible colors to give the user the assurance that other diag- nostic information may be correctly interpreted. The LEDs will flash all yel- low, then either green or red.
RUN-TIME ACTIVITY & ERROR MONITORING During normal operation the fiber optic and copper ready LEDs provide continuous diagnostic information. These LEDs detect and display token ring activity. The insert status LED informs the user of the insert status of the fiber optic and copper media.
An important point after buying a device Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk you will learn all the available features of the product, as well as information on its operation. The information that you get Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk will certainly help you make a decision on the purchase.
If you already are a holder of Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk.
However, one of the most important roles played by the user manual is to help in solving problems with Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omnitron Systems Technology 4/16 Token Ring Fiber Converter OmniHawk along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
