Instruction/ maintenance manual of the product M10 Orbitsound
Go to page of 16
M10 airSOUND ™ BAR USER’S GUIDE version 1. 0.
CONTENT S W elcome 2 Product Overview 3 Getting S tarted 5 Bluetooth 7 Advanced Setup & Use 8 Subwoofer Wireless 9 Subwoofer Pairing Other features 11 Maintenance 12 T roubleshooting 13 Specifications 15 W elcome Thank you for purchasing the orbitsound M10 airSOUND BAR with wireless subwoofer and Bluetooth.
P ackage contents Inside the bo x you will find: • M10 soundbar • Wireless subwoofer • Remote control • Power supply + power cord (soundbar) • Power cord (subwoofer) • Q.
The subwoofer Wireless ST A TUS: OFF: No connection / No power / Low power state ON: Good sync / connection Flash: Bad connection Subwoofer V olume: Normal: Normal volume Max: +8dB volume Min: Minimum volume (Back shown) The subwoofer is a wireless active loudspeaker that produces powerful Hi-Fi bass.
6. Source LED: Shows which source is currently playing 7 . Status: Blue shows the soundbar is on. R ed shows standby . (The light will flash when a button is pressed on the remote or on the control panel. Hint: Long press the power button to reset the soundbar .
Connect the Soundbar to your TV 1) R emove plastic covers from optical cable: IMPORT ANT : R emove the protective plastic covers from a new TOSLINK (optical) cable before connecting to the optical sockets. Failure to remove these covers may result in damage and will interrupt the sound output.
3) T urn the soundbar ON: Optical Bluetooth Aux Press the power button. The indicator light will turn blue, and the optical indicator will light, showing the unit is playing the optical source. Y ou can now hear the sound from your TV via the digital optical cable.
the Bluetooth device list, and pair with it. When a device is paired, the soundbar Bluetooth source light will change to solid blue. 3. If your device was previously paired, then you can short press the Bluetooth button to ‘grab’ the device and resume playback.
IMPORT ANT : The areas marked need to be clear of obstacles in order for the spatial stereo sound field to work properly . HINT : Because Orbitsound produces a uniform sound field, the soundbar does not need to be placed directly in front of the listener .
T o change channel - Make sure the soundbar AND subwoofer are switched on: Spatial Soundbar with Bluetooth and Wireless Subwoofer ©2013 Orbitsound ltd. Model: M10 To prevent electric shock, do not remove screws. No User serviceable parts inside. CAUTION: DC in 22V 2.
1. (Optional Step - resets subwoofer) L ong press the subwoofer pair button (this erases any previous pairing). The subwoofer ST A TUS will flash confirmation. 2. Long press the soundbar pair button to enter pairing mode . The soundbar pairing ST A TUS will slow flash to show it has entered pairing mode.
Y ou may wish to reset the soundbar settings (returning everything to factory default). T o do this, switch the unit on, then press and hold the power button for a few seconds on the control panel. The soundbar status light will flash, and then the soundbar will reset.
T roubleshooting No sound is heard Check power connections and that there is a continuous blue light on control panel. Check that the TV or other sound source is playing and that it is connected properly to the soundbar . If unsure that your media device is playing, unplug, and test with headphones.
Digital optical: ‘ Clicking’ or no sound Connect the TV optical output to the soundbar optical input preferentially . Ensure both ends of the optical cable have had the protective plastic tip removed. Ensure both ends of the cable have been inserted fully; a distinct ‘click’ will be felt when the cable is properly seated.
Specifications Frequency range +/- 3 dB [Hz] 38 – 16KHz Control; response (remote control) LF: +,-8dB subwoofer volume HF: 10KHz +/- 8dB EQ Maximum SPL [dB] 97dBA Amp.
ORBITSOUND L TD . +44 (0)8456 521 219 www .orbitsound.com/support support@orbitsound.com.
An important point after buying a device Orbitsound M10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Orbitsound M10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Orbitsound M10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Orbitsound M10 you will learn all the available features of the product, as well as information on its operation. The information that you get Orbitsound M10 will certainly help you make a decision on the purchase.
If you already are a holder of Orbitsound M10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Orbitsound M10.
However, one of the most important roles played by the user manual is to help in solving problems with Orbitsound M10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Orbitsound M10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
