Instruction/ maintenance manual of the product RM622PA Oregon Scientific
Go to page of 12
1 EN CONTENTS Introduction ............................................................. 2 Product Overview ................................................... 2 Front View ......................................................... 2 Back View ........
2 EN PRODUCT OVERVIEW FRONT VIEW 1. SNOOZE / LIGHT button 2. UP and DOWN keys 3. MODE button 4. ZONE button 5. ALARM button 6. Swivel projection 7. LCD display INTRODUCTION Thank you for selecting the Oregon Scientific TM Atomic Projection Clock (RM622PA).
3 EN BACK VIEW 1. FOCUS knob 2. IMAGE ROTATION knob 3. Power adaptor socket 4. Battery compartment 5. PROJECTION ON switch 6. Table stand 7. RESET hole 1 2 3 4 5 6 7 LCD DISPLAY 1. Clock hour and minute 2. Radio frequency (RF) signal reception 3. Alarm on icon 4.
4 EN AC ADAPTOR The main unit has a 3.0V AC/DC adaptor with jack, which provides continuous clock projection. CLOCK The clock automatically synchronizes the current time and date when it is brought within range of the WWVB- 60 radio signal (60 kHz) generated from Fort Collins, Colorado.
5 EN ACTIVATING / DEACTIVATING THE RF SIGNAL 1. To activate the RF signal, press and hold for 2 seconds. 2 . To deactivate the RF clock reception, press and hold ZONE for 2 seconds. NOTE The RF signal icon appears on the LCD when it is activated and disappears when it is deactivated.
6 EN When the Snooze function is enabled, the Snooze period will last 8 minutes before the alarm sounds again. will flash coninuously on the LCD. NOTE Pressing SNOOZE / LIGHT turns on the green LED backlight that lasts for 5 seconds before automatically turning off.
7 EN NOTE If the unit is being run on batteries, the PROJECTION ON / OFF switch does not need to be on. If you press SNOOZE / LIGHT , the projection light will turn on anyway. ADJUSTING THE PROJECTOR The RM622PA allows you to adjust the projector so that you are able to view the projection image with more clarity and convenience.
8 EN TROUBLESHOOTING PROBLEM SYMPTOM REMEDY Calendar Illegible month / Change language date Clock Cannot adjust Disable atomic clock clock Cannot auto- 1.
9 EN Resolution: 0.2 ° F (0.1 ° C) CLOCK RF Clock: Auto or manual (disabled) Clock display: HH:MM:SS Hour format: 12hr AM/PM Calendar: MM/DD; weekday in 3 languages (English, Spanish, French) Alarm: Single alarm with 2-minute crescendo POWER Main unit batteries: 2 x AA (UM-3) 1.
10 EN FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
11 EN © 2004 Oregon Scientific. All rights reserved. P/N: 086-003592-018.
12 EN Atomic Projection Clock Model: RM622P A User Manual.
An important point after buying a device Oregon Scientific RM622PA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RM622PA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RM622PA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RM622PA you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RM622PA will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RM622PA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RM622PA.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RM622PA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RM622PA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center