Instruction/ maintenance manual of the product EZY100 Oricom
Go to page of 88
Mobile Phone Operating Instructions ezy100 GSM Mobile Phone with Emergency Call Function.
.
3 T able of contents Safety Information and Warnings ................................... 4 Getting Started .............................................................. 9 Y our Oricom phone and controls .................................. 19 T elephone Opera tion .
4 1 Safety Information and W arnings It is very important that you read the User Guide carefully as it contains detailed information on set up and operational issues which you will need to be aware of to ensure the mobile operates properly .
5 Safety Information and W arnings YOU SHOULD NEVER REL Y SOLEY ON ANY MOBILE PHONE FOR ESSENTIAL COMMUNICA TIONS SUCH AS MEDICAL EMERGENCIES. Areas of use Do not use the phone in prohibited areas such as on • aircraft, in a petrol station in hospitals, or near to fuel and other fl amable liquids, chemicals or blasting areas.
6 Keep the phone and accessories out of the reach of children. • The SIM card can be removed. Caution! Small children • can swallow them. The earpiece of the handset may attract small metal • objects such as staples and pins. Care should be taken when placing the handset near these items.
7 Safety Information and W arnings possible interference. If you have had a pacemaker implanted, do not carr y the phone in a breast pocket when switched on. Always hold the phone to the ear furthest away from the pacemaker during calls. Switch the phone off immediately if you notice or suspect any adverse effects.
8 Safety Information and W arnings AC power adaptor Attention: Only use the AC power adaptor supplied. As other power supplies could damage the phone. Rechargeable batteries Attention: Never dispose of batteries into a fi re. Only use batteries of the same type.
9 2 Getting Started Safety information Attention: It is essential to read the Safety Information in Chapter 1 before starting up. Checking the package contents The package contains: 1 mobile phone 1 L.
10 Y ou can verify your IMEI number by dialling *#06# on your mobile phone. If your phone is lost or stolen: Notify your network carrier and the police immediately .
11 PIN & PIN2 codes The PIN ( P ersonal I dentity N umber) and PIN2 codes are 4 to 8-digit numbers. The PIN and PIN2 codes are given to you, together with the SIM card, by your network provider . PUK & PUK2 codes The PUK ( P ersonal U nblocking K ey) and PUK2 codes are 4 to 8-digit numbers.
12 Installing the SIM card Risk of swallowing small objects! The SIM card can be removed. Small children can swallow them. The emergency call number 000 can still be dialled even if there is no SIM card installed. The number is automatically dialled if the emergency call switch is activated! Switch the phone off.
13 Slide the SIM card with the gold coloured contacts facing down in the moulded SIM card holder . Insert the battery . The gold coloured contacts on the battery must face towards the top left. Press lightly on the bottom end of the battery until it snaps into place.
14 Mains power outlet Getting Started Charging the battery Before starting to charge the battery , ensure that it has been installed properly . Do not remove the battery while it is being charged. This could damage the phone. When charging the battery for the fi rst time, it should be charged for at least 4 hours.
15 Getting Started Charging via the optional desktop charger Plug the connector on the AC adaptor cable in the mini USB port on the desk top charger . Place the phone into the charging cradle.
16 Getting Started Battery status warning When the battery charge is low, a warning message appears in the display . Charge the battery . In cases where the battery charge is extremely low, it is possible that the back-lighting no longer works and certain functions are no longer available.
17 Keep the battery contacts clean and free of dust and dirt. The battery can be charged/discharged hundreds of times but its service life is limited. Replace the battery when the battery no longer holds suffi cient charge for normal use.
18 Setting the time and date 1. During standby mode, press M1 to enter the setup menu. 2. Use i / j to select Clock & Alarm . Press M1 to confi rm. 3. Use i / j to select Time & Date , press M1 to confi rm. Set Home City 4. Use i / j to select Set Home City , press M1 to confi rm.
19 3 Y our Oricom phone and controls Y our Oricom phone and controls 14 15 10 11 12 13 8 1 2 3 4 7 6 5 9.
20 Y our Oricom phone and controls 1 Earpiece 2 One-touch dialling buttons / Softkeys 3 On/Off button / On-hook button 4 Scroll up/down button 5 Microphone 6 Digit keys 7 Call button 8 LED 9 Loudspeak.
21 1 Earpiece The voice of the caller can be heard here when no headset is being worn or the handsfree equipment has not been installed, activated and the device set to Handsfree mode.
22 Y our Oricom phone and controls 5 Microphone Is activated during a call 6 - Digit keys Enter phone numbers and names or write a text. 7 Call button T ake a call or dial a number . Open the call list. 8 LED Indicates the phone operating status. 9 Loudspeaker Y ou can hear the caller’ s voice from here when the phone is in Handsfree mode.
23 Y our Oricom phone and controls 15 Headset socket Y ou can connect an optional headset (Part No: KESP-5185-P). The earpiece, loudspeaker and microphone are deactivated. Y ou can only hear and speak via the headset. There is no guarantee that headsets from other manufacturers will work properly .
24 T elephone Operation 4 T elephone Operation Description of operating sequences in the manual Display Description Displays the contour of buttons Press the button depicted briefl y 2 sec.
25 Icons and texts in the handset display Icon Description Displays the battery capacity . Running-through segments, the batter y is being charged. Signal strength of the phone connection Alarm1 and/o.
26 Ringing tone only is activated Vibration alert only is activated Vibration alert is activated fi rst, then ringing tone Vibration alert and ringing tone are activated 1 Roaming calls: Outgoing or incoming international calls subject to special charges.
27 T elephone Operation Standby mode All descriptions in this operating manual assume that the mobile phone is in Standby mode. The system switches to Standby mode by pressing the button, several times if necessary . It may be necessary to deactivate the key lock function.
28 T elephone Operation Button In Standby mode In a menu M1 Open the main menu Various functions M3 Initiate release of the key lock function Various functions Navigating in the menu All the functions can be accessed via the various menus.
29 T elephone Operation Entering Data The digit keys are also labelled with letters for the entry of text. The phone provides various methods by which text can be entered. These are used when entering or editing contacts in the phone book, when searching for names in the phone book and when writing SMS text messages.
30 Multitap upper case Multitap lower case Digits T o switch between the input modes, press the button. Punctuation and special characters T o access Editing mode, press the button. Punctuation marks and special characters are displayed. Use the i / j buttons to select the required character and insert it by pressing the M1 .
31 4. Use i / j to select To SIM or To Phone , press M1 to confi rm. 5. Use i / j to select options ( Name, Phone Number , Home Number , Company Name, Email Address, Offi ce Number ) and press M1 to confi rm and enter the edit mode. 6. Use the keypad to enter the information, press M1 to confi rm.
32 Call Functions 5 Call Functions T aking a call When there is an incoming call, is shown on the display , press to take the call. Rejecting a call When there is an incoming call, is shown on the display , press to reject the call. Ending a call During a call, press to end the call.
33 Dialling numbers from the phone book Y ou must have already stored phone numbers in the phone book. 1. During standby mode, press j to open the phone book. 2. Use i / j buttons to select the entry and press to dial the number . If you have assigned several phone numbers to the entry , select the number required.
34 T alk time display The duration of a call is displayed during a call in hours, minutes and seconds. Handsfree This function is used to listen to the caller via the loudspeaker . 1. When "H-Free" is shown on the display , the handsfree mode is activated.
35 Calls can still be taken in the normal way even when the keypad lock function is activated. 2. Press M3 and then to activate the keypad lock function immediately after unlock the keypad. Deactivating the ringing melody The ringing melody can be deactivated.
36 When a call is put on hold, the menu option changes to "Retrieve". 2. T o retrieve the call put on hold, use i / j to select Retrieve , and press M1 to resume the call. Handsfree 1. Use i / j to select H-Free , press M1 to confi rm and set the handsfree mode on or off.
37 Emergenc y Call Function 6 Emergenc y Call Function This mobile phone is equipped with a convenient emergency call function. Up to 5 phone numbers can be entered for emergency calls.
38 Emergenc y Call Function 4. Use i / j to select options ( Help No.1 to Help No.5 ), press M1 to confi rm. 5. Use i / j to select From Phonebook, press M1 to confi rm and open the phone book and select an entry . Select View and press M1 to confi rm and view the entry .
39 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Help Setting , press M1 to confi rm. 3. Use i / j to select Help Call Duration , press M1 to confi rm. 4. Use i / j to select Off or 1 min . to 5 min ., press M1 to confi rm.
40 Emergenc y Call Function, Examples 7 Emergenc y Call Function, Examples The emergency call function is explained here using two realistic examples. If no SIM card is installed and the emergency call switch is activated, the emergency call number 000 is automatically dialled.
41 Emergenc y Call Function, Examples 6. Use i / j to select emergency call center and press M1 to confi rm. 7. In the Set Help Numbers menu, use i / j to select Reach Setting and press M1 to confi rm. 8. Use i / j to select Reach One Only and press M1 to confi rm.
42 Emergenc y Call Function, Examples Emergenc y call to several numbers The required phone numbers must be stored in the phone book (relatives/friends). Proceed as follows: 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Help Setting , press M1 to confi rm.
43 Emergenc y Call Function, Examples After max. 5 emergency numbers have been dialled 1. In the Set Help Number menu, use i / j to select Reach Setting and press M1 to confi rm. 2. Use i / j to select Reach All and press M1 to confi rm. 3. Back to the Help Setting menu, use i / j to select Help Call Duration and press M1 to confi rm.
44 Starting/Ending the Emergenc y Call Function 8 Starting/Ending the Emergenc y Call Function Starting the emergenc y call Slide the emergenc y call switch upwards. An acoustic signal is issued when the corresponding function is activated. The mobile phone dials the assigned number and switches to handsfree mode.
45 Phone Book 9 Phone Book Up to 500 entries (names with several related phone numbers) can be stored in the phone book. Always enter the area code with all the phone • numbers. When the memory capacity is used up, the • corresponding message appears when an attempt is made to store another entry .
46 Phone Book Entering names The digit keys are also labelled with letters for the entry of names. Press the corresponding button the respective number of times to enter letters. Information on ways of entering text; Page 29. 1. During entering, press 0 to enter a space.
47 Complete any further information regarding this name according to the procedure described. When all the necessary information has been entered: 1. Press M3 to confi rm the settings. 2. Press M1 to save the entries, press M3 to reject the entries. Saving in Standb y mode 1.
48 Modifying , editing, deleting phone book entries 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Phonebook , press M1 to confi rm. 3. Use i / j to select Search , press M1 to confi rm. Search for the required entry as described at the beginning of this chapter .
49 Editing or deleting all entries 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Phonebook , press M1 to confi rm. 3. Use i / j to select Delete All or Copy All , press M1 to confi rm. Select Delete All to delete all the entries from the SIM or phone.
50 Phone Book 3. Use i / j to select Caller Group , press M1 to confi rm. 4. Use i / j to select Family , press M1 to confi rm. 5. Use i / j to select Member List , press M1 to confi rm. If there are no entries in the Member List , only the Add menu option is available.
51 Settings 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Phonebook, press M1 to confi rm. 3. Use i / j to select Settings , press M1 to confi rm. 4. The following functions are available: Select Memory Status to display the status of the SIM and phone.
52 Call List 10 Call List The mobile phone is equipped with a call list. Y our mobile phone stores the last phone numbers dialled, taken and received but missed. If one of the phone numbers received matches an entry in the phone book, the associated name appears.
53 The following functions are available: Select Clear to delete the entry , Select Save to save the entry on the SIM or phone. Select Call to dial the entry . Select Edit to edit the entry . Select Delete All to delete the calls list. Use i / j to select the above options and press M1 to confi rm.
54 11 SMS − T ext Messages Writing an SMS text A text message can contain up to 612 characters, including spaces. 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Messages , press M1 to confi rm. 3. Use i / j to select Write Message , press M1 to confi rm.
55 4. Select Send T o Many and press M1 to confi rm. The message can be sent to several recipients selected from the phone book. 5. Select Send By Group and press M1 to confi rm. The SMS text is sent to all the members of a group. SMS text messages sent and received T exts received are indicated by a ringing tone which you have set.
56 Select Reply to reply to the number from which the text was sent. Select Forward to Forward the text to a different number . Select Send to send the SMS text. Select Edit to edit the SMS text. Select Clear to delete the SMS text. Select Copy to SIM/Copy to Phone to copy the SMS text.
57 12 V oice Mail It is possible that not all functions described are supported by every network ser vice provider . Therefore, please contact your local mobile phone network service provider for details. Fees and charges may apply for network services.
58 If a number is already available, it appears instead of "Empty". 6. Use keypad to enter or edit the Voice Mail number and press M1 to confi rm and save it. The following functions are available in the "Voice Mail" menu. Select Clear and press M1 to confi rm, the Voice Mail number is deleted.
59 13 Network ser vices It is possible that not all functions described are supported by every network ser vice provider . Therefore, please contact your local mobile phone network service provider for details. Fees and charges may apply for network services.
60 3. Use i / j to select the setting for which calls should be redirected: All Voice Calls , If Unreachable, If No Answer , If Busy , press M1 to confi rm. 4. Use i / j to select Activate and press M1 to confi rm, use keypad to enter the number or select from the phone book.
61 Changing the network passwor d This service must be requested from the telephone network provider . The provider then makes the corresponding numeric code available. Navigate to the "Call Setting" menu. 1. Use i / j to select Call Barring , press M1 to confi rm.
62 14 Settings One−touch dialling buttons It is possible to assign phone numbers to the one-touch dialling buttons M1 , M2 or M3 which are then dialled directly by pressing and holding the corresponding button. Each number you want to defi ne as a one-touch dialling number must be stored in the phone book.
63 Settings Clock and alarm This menu option can be used to set and change the date, time and alarms. Open the menu: 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Clock & Alarm , press M1 to confi rm. Time & Date 1.
64 Settings Set Alarm 1. In the Clock & Alarm menu, use i / j to select Set Alarm , press M1 to confi rm. 2. Use keypad to enter the time, press M1 to confi rm. Show Time & Date 1. In the Clock & Alarm menu, use i / j to select Show Time & Date , press M1 to confi rm.
65 Settings Flashing keypad Use this menu to select whether the keypad back lighting should fl ash in the event of incoming calls. 1. During standby mode, press M1 to enter the main menu. 2. Use i / j to select Phone Setting , press M1 to confi rm. 3.
66 Settings 5. Use i / j to select Calendar , press M1 to confi rm. In the example above, the calender is opened when the 4 button is pressed for longer than 3 seconds when in Standby mode. Security settings This menu is used to defi ne which functions on the phone or SIM card should be protected by a password/ PIN.
67 Settings SIM Lock The password is supplied together with the SIM card. If you deactivate the SIM lock, you need not enter the PIN after switching the mobile phone on. It is recommended to leave the SIM lock on to prevent unauthorized persons from using the mobile phone.
68 Settings 1. Use i / j to select Display Setting , press M1 to confi rm. 2. Use i / j to select options, press M1 to confi rm. Select Language to set the display language Select Greeting T ext to edit the text displayed when the phone is switched on.
69 Settings Select Set Volume to select specifi c volumes for the various alert ringing signals. Select Alert T ype to select whether you are alerted of incoming calls via a ringing tone or vibration.
70 15 Advanced Settings SMS − T ext Messages It is possible that not all functions described are supported by every provider . Therefore, please contact your local mobile phone network service provider for details. 1. During standby mode, press M1 to enter the main menu.
71 3. Use keypad to enter or edit the MSC number and press M1 to confi rm. V alidity Y ou can use this feature to defi ne how long an attempt should be made to deliver a message which you have sent. Navigate to the "Profi le Setting" menu.
72 1. Use i / j to select Profi le Setting , press M1 to confi rm. 2. Use i / j to select Common Setting , press M1 to confi rm. 3. Use i / j to select Delivery Report or Reply Path , press M1 to confi rm and use i / j to switch it on or off. Memor y status Navigate to the "Profi le Setting" menu.
73 Broadcast messages Y ou mobile phone supports receiving broadcast 2 messages. Y ou receive information on: broadcast messages, charge rates, data and offers are from your network service provider . 1. During standby mode, press M1 to enter the main menu.
74 Network setting Network selection: This menu can be used to select mobile telecommunication networks other than your own mobile network provider . However , the corresponding agreements must have been concluded. Preferred networks: Y ou can select the mobile telecommunication networks prescribed on the SIM card and edit them.
75 T roubleshooting 16 T roubleshooting Problems and solutions Problems Solutions The mobile phone can not be switched on. − Insert battery , charge and try again. The display is "locked" when the mobile phone is switched on. − Enter the PUK to "unlock" the SIM card.
76 T roubleshooting Keypad does not function or only functions very slowly . − The operating speed of the display is reduced in the case of low temperatures. This is normal. Use the phone in a warmer location. A message appears in the display for some functions, indicating execution/use is not possible.
77 T roubleshooting No connection to the mobile telecommunication network. − Contact your network service provider . The "Insert SIM" message appears in the display . − Ensure that the SIM card has been installed correctly . Contact your network service provider , if necessary .
78 T echnical Properties 16 T echnical Properties T echnical data Feature V alue Standard GSM 1 900, 1800 MHz Dual-band Dimensions 50 x 128 x 16.5 mm (W x H x D) Weight < 100 g incl. battery Power supply Input: 100−240 V , 50−60 Hz, 0.2 A Output: Mini-USB 5 V , 800 mA Battery Model: KEBT -5057 3.
79 17 This oricom mobile phone meets the guidelines for exposure to r adio waves The Australian safety standard for electromagnetic emissions (EME) is set by the Australian Radiation Protection and Nuclear Safety Agency (ARP ANSA) and regulated by the Australian Communications and Media Authority (ACMA).
80 Warr anty (Australia) (a) W arranty Oricom International Pty Ltd (Oricom) warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty under the T rade Practices Act 1974 or any other similar legislation.
81 (iii) Any un-controlled external cause to the product not functioning including but not limited to electricity failure, lighting, over voltage; (iv) Non adherence by you to the warnings in the User.
82 Customer Support If you feel this product is not working correctly please consult the user guide and ensure that you are using the product in accordance with the instructions.
83 Index A AC power adaptor ......................................................................................... 8 Areas of use ................................................................................................. 5 Automatic redialling .
84 D Deactivating the ringing melody ...................................................................35 Deactivating the ringing tone for the current call ........................................... 35 Description of operating sequences in the manual.
85 H Handsfree ...................................................................................................34 I Icons and texts in the handset display .......................................................... 25 If your phone is lost or stolen .
86 P Passwords ..................................................................................................10 Phone security ..............................................................................................9 Phone settings .........
87 SIM T oolkit ..................................................................................................72 SMS service center ..................................................................................... 70 SMS Settings .............
Customer Support Email: suppor t@oricom.com.au W eb: www .oricom.com.au Phone: (02) 4574 8888 F ax: (02) 4574 8898 A ustralia Oricom Inter national Pty Ltd Lock ed Bag 658 South Windsor , NSW 2756.
An important point after buying a device Oricom EZY100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oricom EZY100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oricom EZY100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oricom EZY100 you will learn all the available features of the product, as well as information on its operation. The information that you get Oricom EZY100 will certainly help you make a decision on the purchase.
If you already are a holder of Oricom EZY100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oricom EZY100.
However, one of the most important roles played by the user manual is to help in solving problems with Oricom EZY100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oricom EZY100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
