Instruction/ maintenance manual of the product MX1260 OSD Audio
Go to page of 5
MX-1260 OWNER’S MANUAL Multi Zone A mplifier ZONE.
TO PREVENT FIRE OR SHOCK HAZARD , DO NO T USE THIS PL UG WITH AN EXTENSION CORD , RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES C AN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD , DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE.
General Information and Features Front Panel Power Switch: This is used to turn the unit on or of f. LED Indicators: There is one LED indicator for the power and each of the six zones. When first turning the power on, the power LED will come on red and then switch to blue to indicate the amplifier is in a ready mode.
Connect the right or left output from the audio source to the right or left input of the zone you are bridging. Repeat this for each zone you want in bridged mode. The “BR/ST” switch should be in the bridged (BR) position. Make sure the switch is in this mode only on the zones you want bridged.
Conforms to UL Std 6500 Certified to CAN/CSA Std C22.2 No. 1 T ested to Comply with FCC Standards HOME OR OFFICE MX1260 Multi Zone Amplifier 5 775 Columbia St.Brea,CA 92821 562-697-2600 www.OSDAudio.com Limited W arranty OSD Audio warrants its audio products against defects in material and workmanship for a limited period of time.
An important point after buying a device OSD Audio MX1260 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought OSD Audio MX1260 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data OSD Audio MX1260 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, OSD Audio MX1260 you will learn all the available features of the product, as well as information on its operation. The information that you get OSD Audio MX1260 will certainly help you make a decision on the purchase.
If you already are a holder of OSD Audio MX1260, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime OSD Audio MX1260.
However, one of the most important roles played by the user manual is to help in solving problems with OSD Audio MX1260. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device OSD Audio MX1260 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
