Instruction/ maintenance manual of the product 435103 ParaBody
Go to page of 11
I Serious Steel 435103 LEG PRESS ADAPTER. KIT I ASSEMBLY INSTRUCTIONS Part # 6747801 1 Revision: 09/25/97.
]IMPORTANT NOTES] WELCOME TO THE WORLD OF $~eiOU$ $~l~i!t Please note: * Thank you for purchasing the 435103 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
KEY 1 2 3 4 5 6 7 8 PART# DESCRIPTION 6747603 FRONT LEG 3116202 3-1/2" PULLEY 3108102 QUICK DISCONNECT LINK 6427101 KEYHOLE CLEVIS 3117305 CLEVIS PIN 3112901 COTTER PIN 6732901 TENSION CORD 6747901 LEGPRESS CABLE PARTS LIST QTY KEY PART# 1 9 6535301 2 10 3102501 1 11 3102802 1 12 3102502 1 13 3102801 1 14 3102933 1 15 3102910 1 DESCRIP’.
FIGURE 2 STEP 2 ¯ If the 445103 SECOND STACK OPTION is not installed, the rear SHROUD opening must be removed. AI?ply pressure to the bottom of the SHROUD where the "V" groove is and carefuly remove the weight stack opening on the SHROUD as shown in FIGURE 3.
3/8 X 2"~ BASE FIGURE 3 ¯ SECURELY attach one 3-1/2" PULLEY (2) to the FRONT LEG (1) using one 3/8 X 2" BOLT (14), two 3/8" WASH- ERS (10), and one 3/8" LOCK NUT (11). See FIGURE ¯ Attach the open end of PRESS LINK CABLE (8) to the QUICK DISCONNECT LINK (3).
1/2 X 3"(~ ~LEG PRESS FIGURE 5 STEP 5 ¯ SECURELY attach the LEG PRESS to the FRONT LEG (1) using two 1/2" X 3" BOLTS (15), two 1/2" WASHERS (12), and 1/2" LOCK NUTS (13).
BASE FIGURE 6 STEP 6 ¯ SECURELY attachthe FRONT LEG (1) to 425 BASEusing two 1/2 X 3" BOLTS (15), two 1/2" WASHERS (12) and two 1/2" NUTS (13).
FIGURE DETAIL 7 I / / LEG CABLE LEG PRESS CABLE CABLE CABLE STEP 7 ¯ Run the LEG PRESS CABLE (8) through the correct hole on the d-ring and attach one KEYHOLE CLEVIS (4) to the end of LEG PRESS CABLE (8).
LEG CABLE LEG CABLE ~ CABLE FIGURE 8 CABLE STEP 8 ¯ Attach one TENSION CORD (7) to the KEYHOLE CLEVIS (4) using one CLEVIS PIN (5) and one COTTER PIN (6) as FIGURE 8.
FIGURE 9 BOOM LEG PRESS CABLE STEP 9 ¯ CAREFULLY attach the TENSION CORD (7) to the corresponding small shaft on the TOP BOOM using one 1/4" CAP NUT (9) as shown in FIGURE 9.
3/8" X 1" BUTTON~"~ HEAD CAP SCREW SPRING PIN ADJUSTMENT 3/8",X 1" BUTTON HEAl3 CAP SCREW FIGURE 10 STEP 10 ¯ SECURELY attach the four previously removed 3/8 X 1" BUTTON HEAD CAP SCREWS to the rear S[]?,OUD. See FIGURE 10.
An important point after buying a device ParaBody 435103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ParaBody 435103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ParaBody 435103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ParaBody 435103 you will learn all the available features of the product, as well as information on its operation. The information that you get ParaBody 435103 will certainly help you make a decision on the purchase.
If you already are a holder of ParaBody 435103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ParaBody 435103.
However, one of the most important roles played by the user manual is to help in solving problems with ParaBody 435103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ParaBody 435103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
