Instruction/ maintenance manual of the product Net2 Entry Paxton
Go to page of 8
Page 1 05/11/2012 Ins-30202 Net2 Entry - Monitor Technical Support T echnical help is av ailable: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) 01273 811011 support@paxton.co.uk Documentation on all Paxton products can be found on our website - http://www .
Page 2 Installation A desk mount stand is also av ailable (PN: 337-847) See also : AN1127 - Net2 Entry - Planning and installation < http://paxton.info/1896 > Determine where the monitor will be sited. The top right corner of the unit is regarded as the reference point for drilling and measurements.
Page 3 Once PoE power is a vailable at the unit, touch the screen to activate the menu. Where it is not practical to run a patch cable to the rear of the unit, it can be directly wired to the network cable via the supplied IDC module.
Page 4 Conguration When the monitor is rst connected to the network it will not have a Monitor ID number . 3. Touch the 'Installer settings' option. Next, if the system has an Engineer code it must be entered. 4. Touch the 'Enter monitor ID' option.
Page 5 2. Incoming call 3. Answering a call 4. Unlock the door When a visitor calls a monitor , it will sound its ring tone until it is answered or it times out. The 'open door' button will illuminate green and the video image will be displayed.
Page 6 2. Select the camera (if more than one) 1. Select 'View video' mode Operation - Viewing a camera If more than one panel is installed, this screen will display . Use the up and down arrows to select the required camera and touch ' Accept'.
Page 7 Volume settings Q Allows the volume of the speaker and ringtone to be adjusted. Call ring tone Q Allows a choice of ringtone. Ring time Q Sets the period the monitor will ring unless the call is answered. Sound Settings Monitor settings Sound settings Q Displays the Sound settings.
Page 8 Operation - Do not disturb mode Visitors can be stopped from calling the monitor by putting it into 'Do not disturb' mode. If the screen is blank, touch the screen to display the menu. T ouch the 'Do not disturb' option. The button will illuminate red.
An important point after buying a device Paxton Net2 Entry (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Paxton Net2 Entry yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Paxton Net2 Entry - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Paxton Net2 Entry you will learn all the available features of the product, as well as information on its operation. The information that you get Paxton Net2 Entry will certainly help you make a decision on the purchase.
If you already are a holder of Paxton Net2 Entry, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Paxton Net2 Entry.
However, one of the most important roles played by the user manual is to help in solving problems with Paxton Net2 Entry. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Paxton Net2 Entry along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
