Instruction/ maintenance manual of the product 2.6 C Peavey
Go to page of 16
.
A Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FRONT PANEL FEATURES DDTTM ACTIVE LED INDICATOR (1) Illuminates when DDTTM compression is taking place. This LED becomes a clip indicator when the rear panel DDTTM ENABLE/DEFEAT switch is in the DEFEAT position. OPERATION NOTE: It is normal for the DDT TM LED(s) to flash occasionally during amplifier operation.
Back Panel: 0 6 BACK PANEL FEATURES LINE CORD - 120 V products only (5) A For your safety, we have incorporated a three-wire line (mains) cable with proper grounding facilities.
SPECIFICATIONS Output Power: 4 ohms, 1 kHz at 1% THD: 130 W RMS 8 ohms, 1 kHz at 1% THD: 100 W RMS 2 ohms not recommended Rated Output Power: 4 ohms, 20 Hz to 20 kHz, 0.
WIRING DIAGRAMS STEREO OPERATIO N BOTH INPUT PLUGS FULLY INSERTED Ei SIGNAL 4 W A SIGNAL INPUT S INPUT A INDEPENDENT CHANNE L 130W RM S 4 OHM S q A SPEAKER JACK S SPEAKER JACK S WIRED IN PARALLE L WIR.
Consulte 10s diagramas de1 panel delantero en la seccih de inglks de este manual. FUNCIONES DE TABLERO FRONTAL DDTTM ACTIVE LED (Indicador de actividad de DDTTM) (1) Se ilumina cuando el compresion DDTTM esta funcionando.
Tablero Trasero: FUNCIONES DEL TABLERO TRASERO REMOVABLE LINE CORD (Cable de corriente para 120 V solamente) (5) A Para su protection hemos incorporado un cable de 3 polos con polo a tierra. No es recomendable remover la pata del polo a tierra bajo ninguna circunstancia, se recomienda un adaptador en case necesario.
Veuillez vous rbfbrer au “front panel art” situ6 dans la section en langue anglaise de ce manuel. CARACTERISTIQUES DU PANNEAU AVANT DDTTM ACTIVE LED (DEL tkmoin de DDTTM) (1) S’allume lorsque le circuit de compression DDT intervient.
Panneau Arriere : la sortie (cable en court-circuit ou impedance de charge totale trop faible) ou dune ventilation insuffisante. CARACTBRISTIQUES DU PANNEAU ARRIBRE REMOVABLE LINE CORD (Cordon d’ali.
Siehe Diagramm der Frontplatte im englischen Teil des Handbuchs. BESCHREIBUNG DER FRONTPLATTE DDTTM ACTIVE LED (DDTTM aktiv LED) (1) Leuchtet auf, sobald die DDT-Schaltung durch entsprechende Pegel aktiviert wird.
Riickplatte: 0 6 BESCHREIBUNG DER RiiCKPLATTE REMOVABLE LINE CORD (Nur bei 120 Volt-Geraten) (5) A Zu ihrer Sicherheit haben wir das Gerat mit einem dreiadrigen geerdeten Netzkabel versehen. Es ist unter keinen Umstanden empfehlenswert den Erdungskontakt des AnschluBkabels zu l&en.
For further information on other Peavey products, ask your Authorized Peavey Dealer for the appropriate Peavey catalog/publication. Bass Guitars Guitars Bass Amplification Guitar Amplification Sound R.
THIS LIMITED WARRANTY VALID ONLY WHEN PURCHASED AND REGISTERED IN THE UNITED STATES OR CANADA. ALL EXPORTED PRODUCTS ARE SUBJECT TO WARRANTY AND SERVICES TO BE SPECIFIED AND PROVIDED BY THE AUTHORIZED DISTRIBUTOR FOR EACH COUNTRY. Ces clauses de garantie ne sont vaiables qu’aux Eta&-Unis et au Canada.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. 1. 2. 3. 4. 5. 6. Read all safety and operating instructions before using this product. All safety and operating instructions should be retained for future reference.
0 UL Commercial AUdirJ Equipment @ 25E9 WXED Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Street / Meridian, MS 39301 I U.
An important point after buying a device Peavey 2.6 C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey 2.6 C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey 2.6 C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey 2.6 C you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey 2.6 C will certainly help you make a decision on the purchase.
If you already are a holder of Peavey 2.6 C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey 2.6 C.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey 2.6 C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey 2.6 C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center