Instruction/ maintenance manual of the product X-Eight HS Peavey
Go to page of 144
owner’ s manual X-Eight HS and R T mixing consoles.
X-Eight owner’ s manual HS block diagram 2 5 5 1 3 7 7.
1 2 3 4 5 groups HS p. 41 groups R T p. 59 master HS p. 73 6 master RT p. 101 7 micro muting system p. 125 8 power supply p. 141 stereo inputs p. 25 mono inputs p.
X-Eight owner’ s manual R T block diagram OFF SCL+ ∑ Ø 1 +8 2 3 4 LINE 1 IN L R L R L R L LF POST FADER CTRL FDR Σ Σ Σ Σ LR MUTE SCENE SELECT GC P 2 4 6 6 1 7 7.
how to use this manual conventions terms indicators or controls emplo yed on the X-Eight console will appear as: TERMS tasks are br oken do wn into steps 1 2 3 warnings indicators tips see see—references other sections of the manual containing supplementar y information on the cur rent topic or a related issue Prefered methods.
p. 6 X-Eight owner’ s manual mono input module module panel legend block dia gram 1.
p. 7 mono input module features phantom po wer —+48 V 48 volts DC is a pplied to pins 2 and 3 on the mic-input XLR con- nector . This option is used with condenser micr ophones and activ e dir ect box es that requir e an external DC voltage (phantom po wer) in order to operate.
p. 8 X-Eight owner’ s manual mono input module module panel legend block dia gram 1.
p. 9 mono input module features gain The Input gain contr ol range is closely related to the status of the PA D switch and the LINE switch. In order to establish pr oper gain structure in the console, input gain settings must be set corr ectl y . LINE —switch-up PA D —switch-up 15 to 75dB of gain can be added the mic-input signal.
1 p. 10 X-Eight owner’ s manual mono input module module legend block dia gram panel.
p. 11 mono input module EQ features Many audio signals coming into the console r equire some degr ee of cor- rectiv e eq in order to be part of a good sounding mix.
1 p. 12 X-Eight owner’ s manual mono input module module panel block dia gram.
p. 13 mono input module aux send features Eight auxiliar y AUX SENDS ar e a vailable f or cr eating individual output mix es. These mix es can be used for driving effects pr ocessors, pr oviding monitor mix es, cr eating broadcast or alternate sound r einfor cement mixes, or other special requir ements.
1 p. 14 X-Eight owner’ s manual mono input module module panel block dia gram.
p. 15 mono input module bus assignment features The Input bus assignment section offers considerable flexibility for cr eat- ing what ev entually becomes the main output mix. Such features as LCR , GR OUP P AN ON and eight-individual group assignments allow se veral appr oaches to building the desired mix.
1 p. 16 X-Eight owner’ s manual mono input module module panel block dia gram.
p. 17 mono input module bus assignment features safe pr evie w — LED Red steady This indicates that the mute has been activated by the micr o mute sec- tion and is part of the current mute scene.
1 p. 18 X-Eight owner’ s manual mono input module module panel block dia gram.
p. 19 mono input module level meter features le vel meter Each input includes a five-segment LED meter for visually monitoring signal le vels.This is essential for setting up and main- taining pr oper gain structur e. peak indicator —PK The input signal is monitored at se v eral points thr oughout the chan- nel.
1 p. 20 X-Eight owner’ s manual mono input module module panel block dia gram.
p. 21 mono input module bus assignment features mono assignment —M The signal is assigned to the discrete mono bus. When the LCR button is depressed, this switch is bypassed. left / right assignment —L-R The Input signal is assigned to the main Left and Right output buses, deriving its signal after the channels pan system.
1 p. 22 X-Eight owner’ s manual mono input module module panel block dia gram Direct Out Bal Line In Bal Mic In S e n d R e t u r n I n s e r t.
p. 23 mono input module rear panel featur es direct out 1/4" TRS jack The input channel's signal is a vailable at this output jack. The default signal r outing is deriv ed post-fader , post-eq and post-mute. This output jack is gr ound-compensated.
p. 24 X-Eight owner’ s manual ster eo input module module panel block dia gram 2.
p. 25 ster eo input module features The stereo input module can be configur ed to operate as either stereo or mono . When configured to operate in mono , many f eatures ar e identical to those of the mono input module. line select —Line 2 This switch determines selection of input signals fr om the three sets of rear panel connectors.
p. 26 X-Eight owner’ s manual ster eo input module module panel block dia gram 2.
p. 27 ster eo input module features input gain — GAIN This contr ol adjust the gain of the input pr eamp(s). Both left and right input signals are aff ected by this control. polarity re v erse —ø This switch in verts the polarity of the right input signal in relation to the left input signal.
2 p. 28 X-Eight owner’ s manual ster eo input module module panel block dia gram.
p. 29 ster eo input module four -band stereo EQ features Although left and right signals are pr ocessed separately , the parameters are set in tandem by common fr ont-panel controls. see— mono input module high frequency —HF 15dB boost and cut at 12kHz—shelving response.
2 p. 30 X-Eight owner’ s manual ster eo input module module panel block dia gram.
p. 31 ster eo input module aux send features The following descriptions a pply to the stereo line input module when configured f or stereo operation. see— mono input module for mono oper ation aux send 1– 8 controls These knobs adjust the amount of signal sent the AUX buses.
2 p. 32 X-Eight owner’ s manual ster eo input module module panel block dia gram.
p. 33 ster eo input module bus assignment features balance contr ol The Balance contr ol adjusts the Stereo balance for Left/Right and the Gr oup Assignment section when in Balance mode . When the Stereo Line Input module is being used as a Mono input, both (left and right select switches depr essed) the Balance control functions as a Pan contr ol.
2 p. 34 X-Eight owner’ s manual ster eo input module module panel block dia gram.
p. 35 ster eo input module bus assignment features peak indicator —A separate PK and SIG LED is provided f or left and right The input signal is monitored at se v eral points thr oughout the chan- nel. These points are the mic preamp , the EQ stage and the fader stage.
2 p. 36 X-Eight owner’ s manual ster eo input module module panel block dia gram.
p. 37 ster eo input module bus assignment features balance on —gr oups— BAL ON The left and right signals are summed as mono to mak e up the gr oup assignment signals. The left and right signals are assigned in ster eo to the groups in odd/e ven pairs.
2 p. 38 X-Eight owner’ s manual ster eo input module module panel Bal Line In 2 L R Bal Line In 1 L R Line In 2 L R block dia gram.
p. 39 ster eo input module rear panel featur es The stereo line-input module pr ovides connectors for thr ee stereo line- lev el signals. see— line 2 switch. balanced left and right line-in XLR connectors These two jacks accept balanced or unbalanced +4dB line le vel signals.
p. 40 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 41 gr oup HS module output eq features The HS output-section includes twelv e output-equalizers occup ying the upper portions of the eight GROUP sub-modules and the f our MASTER sub- modules.
p. 42 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 43 gr oup HS module output EQ features equalizer —EQ ON Equalizer is on . This s witch can be used to make A/B comparisons between "flat" and eq'd signals. gr oup equalization —per output channel— EQ T O GR OUP This switch selects the signal path for the eq.
p. 44 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 45 gr oup HS module matrix features The X-Eight HS includes four MA TRIX outputs. Each of these outputs can be made up of signals fr om the eight GR OUPS ; the left, right and mono buses; and an external sour ce.
p. 46 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 47 gr oup HS module aux master output features This section includes the standard output f eatures for AUX SENDS 1– 8. safe pr evie w LED see— mono input module for full descr iption mute see.
p. 48 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 49 gr oup HS module reverse aux / gr oup The REVERSE AUX / GR OUP feature is used to swa p the functions of the AU X MASTER contr ols and the GR OUP MASTER controls.
p. 50 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 51 gr oup HS module group assignment featur es mono assignment —fr om gr oup— MONO The GR OUP signal is assigned to the discrete mono bus. left/right assignment —fr om gr oup— L/R The GR OUP signal is assigned to the main left and right output buses.
p. 52 X-Eight owner’ s manual gr oup HS module module panel block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT SEND XFORMER OPTION +10 F ADER AMP PEAK GROUP BAL OUT GROUP PA N POST GR.
p. 53 gr oup HS module group / aux level featur es signal/peak LED ’s This dual color LED responds to the pr e-fader signal. It illuminates green with varying brightness in proportion to the audio signal. When the signal appr oaches clipping, either pre or post fader , the LED illuminates r ed.
p. 54 X-Eight owner’ s manual gr oup HS module module panel 1 Group Out AUX 1 Out Insert Send Return Insert Send Return Group In 1 block dia gram MONO L-R ∑ CABLE - 50 WA Y SIGNAL PRESENT INSERT S.
p. 55 gr oup HS module rear panel featur es gr oup output This balanced male XLR connector carries the GR OUP output signal. see— group fader , front-panel descr iption gr oup insert point Separate 1/4" TRS jacks provide the ability to insert an external signal pr ocessor into the signal path of the GR OUP .
p. 56 X-Eight owner’ s manual gr oup HS module module panel lamp dim / meterbridge connectors 1 Group Out AUX 1 Out Insert Send Return Insert Send Return Group In 1 Meter Bridge Lamp Dim block dia g.
p. 57 gr oup HS module rear panel featur es auxiliar y 1– 8 output XLR’ s This balanced male XLR connector carries the AUX output signal. These outputs are contr olled by their r espective AUX output level contr ols.
p. 58 X-Eight owner’ s manual gr oup R T module module panel block dia gram 4.
p. 59 gr oup R T module group output contr ol featur es This section contr ols signals sent to the GR OUP OUTPUT XLR on the rear panel. safe pr evie w — LED see— mono input module mute see— mono input module gr oup output le v el contr ol This contr ol is used to adjust the signal level at the GR OUP OUTPUT XLR.
p. 60 X-Eight owner’ s manual gr oup R T module module panel block dia gram 4.
p. 61 gr oup R T module matrix features The X-Eight R T includes four MA TRIX outputs. Each MA TRIX mix can dra w signals fr om the eight GR OUP buses; the left, right, and mono buses; and an external sour ce. matrix 1–4 le vel contr ols These lev el contr ols are used to mix the GR OUP ' S signal into the cor- responding MA TRIX .
p. 62 X-Eight owner’ s manual gr oup R T module module panel block dia gram 4.
p. 63 gr oup R T module exter nal tape input assignment featur es Each of the eight GR OUP sub-modules includes a T APE - IN section, although this section is not directl y associated with the GR OUPS . Its function is to pr ovide a line return (or input) that can be assigned to the left, right and mono outputs.
4 p. 64 X-Eight owner’ s manual gr oup R T module module panel block dia gram.
p. 65 gr oup R T module aux / group assignment featur es aux sends 5–8 This section is used to send signals to AUXES 5 thr ough 8. The aux signals can originate fr om the T APE - IN section or the GR OUP section, pre- or post- fader depending on settings of the switches below .
4 p. 66 X-Eight owner’ s manual gr oup R T module module panel block dia gram.
p. 67 gr oup R T module group / aux level features left-center -right —LCR The post-fader GR OUP signal is assigned to the left, right and mono/center buses. Relative amounts of the signal fed to each bus is deter- mined by the position of the PA N pot.
4 p. 68 X-Eight owner’ s manual gr oup R T module module panel Matrix In 1 S e n d R e t u r n Group 1 Out T ape In 1 I n s e r t block dia gram.
p. 69 gr oup R T module rear panel featur es tape/line-input jack A +4dBu line-lev el signal, balanced or unbalanced, is brought in thr ough this jack. see— tape-in , front-panel description insert point Separate 1/4" TRS jacks allow inser tion of an external signal pr ocessor into the signal path of the GR OUP .
4 p. 70 X-Eight owner’ s manual gr oup R T module module block dia gram panel Matrix In 1 S e n d R e t u r n Group 1 Out T ape In 1 I n s e r t MIDI/DC po wer detail lamp dim/meterbridge connector .
p. 71 gr oup R T module rear panel featur es matrix in 1–4 located on the back of the GROUP 1–4 block These 1/4"TRS jacks accept balanced or unbalanced +4dBu line level sig- nals.
p. 72 X-Eight owner’ s manual master HS module module block dia gram 5 panel.
p. 73 master HS module output EQ features On the MASTER module block, the default sour ces for the four output eq’ s are the MA TRIX 1–4 masters. By using designated assignment switches, source for the first thr ee output eq’ s can be switched ov er to the left, right and mono masters.
p. 74 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 75 master HS module output EQ features lo w frequency —LF Selectable frequency range of 20Hz to 400Hz. The response is bell-sha ped with a fixed Q of 1.5. 15 dB boost/cut. equalizer — EQ ON Equalizer is on . This switch can be used to mak e A/B comparisons between flat and eq’ d signals.
p. 76 X-Eight owner’ s manual master HS module module 5 block dia gram panel.
p. 77 master HS module matrix features The X-Eight HS includes four MA TRIX mix es. Each of these outputs can be made up of signals fr om the eight GR OUPS , left, right, mono and an external sour ce .
p. 78 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 79 master HS module matrix output features safe pr evie w LED see— mono input module mute see— mono input module master output le vels —MTX 1–4 These are the MASTER output le vel contr ols for the MA TRIX section. They contr ol the lev els that appear at the corr esponding MA TRIX output connectors on the rear -panel.
p. 80 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 81 master HS module alter nate out featur es The AL TERNA TE output section allows assignment of the left and right MASTER signals (plus center—if LCR - TO - OUTPUTS is selected) to a separate pair of bal- anced male XLR connectors on the rear -panel.
p. 82 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 83 master HS module alter nate out featur es talkback alternate —T ALK T O AL T OUT The T ALKB A CK system output is added to the left and right AL T out- puts.The level of the T ALKB A CK signal is set by the T ALKB A CK lev el control in the MASTER section.
p. 84 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 85 master HS module left and right level features left and right master faders These faders gov ern the main left and right output lev els. signal/peak LED —SIG/PEAK This dual-color LED responds to the combined pre-fader ster eo sig- nal. It illuminates green with var ying brightness in pr oportion to the audio signal.
p. 86 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 87 master HS module monitor output features The MONIT OR output section contr ols the audio feed for the console oper- ator . Featur es are similar to those of AL T OUT section, except that the MON - IT OR section is normally used to access the SOLO system as w ell as main outputs.
p. 88 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 89 master HS module local monitor output features talkback mono —T ALK T O MONO The T ALKB A CK system output is added to the mono MASTER output. The lev el of the T ALKB A CK signal is set by the T ALKBACK le v el control in the MASTER section.
p. 90 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 91 master HS module mono master level features mono master fader This fader gov erns the mono output lev el. solo Pressing this s witch will include or exclude the mono signal fr om the console's SOLO system.
p. 92 X-Eight owner’ s manual master HS module module panel 5 block dia gram.
p. 93 master HS module talkback features The T ALKBACK system pr ovides facilities for assigning an external signal (usually the console operator's micr ophone) to any of the console's out- puts. Other signals can be r outed through the T ALKBACK system including an external tone oscillator or the built in PINK NOISE generator .
p. 94 X-Eight owner’ s manual master HS module module panel 5 block digram.
p. 95 master HS module solo control featur es headphone le vel This contr ol governs the le vel at the headphone jack located in the fr ont of the console under the arm r est. solo clear When this switch is lit, it indicates that at least one SOLO on the console is active.
p. 96 X-Eight owner’ s manual master HS module module panel Matrix 1 Alt L Out Insert Send Return Left Out In Out 5 block dia gram.
p. 97 master HS module rear panel featur es left and right alternate output XLR ’s This pair of balanced male XLR connectors carries the left and right AL T OUT signals.
5 p. 98 X-Eight owner’ s manual master HS module module Alt R Out Insert Send Return Right Out In Out MIDI/DC po wer detail MIDI In Out DC In block dia gram panel.
p. 99 master HS module rear panel featur es insert points —left, right, and mono Separate 1/4" TRS jacks provide the ability to insert external signal proces- sor into the signal paths of the left, right and mono MASTERS . insert sends —left, right, and mono These jacks connect to the input of signal pr ocessors.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 100 X-Eight owner’ s manual master R T module module panel 6.
p. 101 master R T module matrix master output features This section includes the standard output f eatur es for MA TRIX 1–4 . safe pr evie w LED see— mono input module mute see— mono input module matrix output le vels — MTX 1–4 These are the MASTER output le vel contr ols for the MA TRIX section.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 102 X-Eight owner’ s manual master R T module module panel 6.
p. 103 master R T module matrix level control featur es matrix 1–4 le vels —left, right, and mono These lev el controls mix the left, right and mono signals into the cor- responding matrix. external matrix 1–4 input le vels contr ols These lev el controls ar e used to mix the external MA TRIX input signals into the corr esponding matrix.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 104 X-Eight owner’ s manual master R T module module panel 6.
p. 105 master R T module aux master output features This section includes the standard output f eatures for A UX SENDS 1– 8 . safe pr evie w LED see— mono input module mute see— mono input modul.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 106 X-Eight owner’ s manual master R T module module panel 6.
p. 107 master R T module alter nate output featur es The alternate output section allows assignment of the left and right master signals to a separate pair of balanced male XLR jacks on the rear -panel. By utilizing the mode switches located below the AL T OUT level contr ol, these signals can be derived in a n umber of wa ys.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 108 X-Eight owner’ s manual master R T module module panel 6.
p. 109 master R T module left / right master fader features talkback left/right — T ALK T O L/R The T ALKB A CK system output is added to the left and right MASTER output.The level of the T ALKB A CK signal is set by the T ALKBACK le vel contr ol in the master section.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 110 X-Eight owner’ s manual master R T module module panel 6.
p. 111 master R T module local monitor output features The local MONIT OR output section contr ols the audio feed f or the console operator . Features ar e similar to those of AL T OUT section, except that the MONIT OR section is normally used to access the SOLO system as w ell as MAIN outputs.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 112 X-Eight owner’ s manual master R T module module panel 6.
p. 113 master R T module features monitor talkback —T ALK T O MONIT OR OUT The T ALKB A CK system output is added to the left and right MONIT OR outputs. The lev el of the T ALKB A CK signal is set by the T ALKBACK le vel con- tr ol in the MASTER section.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 114 X-Eight owner’ s manual master R T module module panel 6.
p. 115 master R T module mono master level features mono talkback —T ALK T O MONO The T ALKB A CK system output is added to the mono MASTER output. The lev el of the T ALKB A CK signal is set by the T ALKBACK le v el control in the MASTER section.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 116 X-Eight owner’ s manual master R T module module panel 6.
p. 117 master R T module talkback features The T ALKBACK system pr ovides facilities for assigning an external signal (usually the console operator's micr ophone) to any of the console's out- puts. Other signals can be r outed through the T ALKBACK system including an external tone oscillator or the built-in PINK NOISE generator .
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 118 X-Eight owner’ s manual master R T module module panel 6.
p. 119 master R T module solo control featur es headphone le vel This contr ol governs the le vel at the headphone jack located in the fr ont of the console under the arm r est. solo clear When this switch is lit, it indicates that at least one SOLO on the console is active.
block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ p. 120 X-Eight owner’ s manual master R T module module panel Matrix.
p. 121 master R T module rear panel featur es matrix 1– 4 output XLR ’s This gr oup of four balanced male XLR connectors carries the MA TRIX 1–4 output signals.
Matrix Out 4 Aux 4 A 3 Aux 8 A 7 A Mon Out L Mon Out R Ext Mon In L Ext Mon In R block dia gram MA TRIX LEVEL MONO SOLO L-R SOLO LEFT POST FADER GC +10 ∑ AUX LEVEL AUX BAL OUT +10 TALK T O AUX TAL K TO AUX Σ 6 p.
p. 123 master R T module rear panel featur es left, right, and mono output XLR ’s This gr oup of three balanced male XLR jacks carries the left, right and mono output signals.
p. 124 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 125 micr opr ocessor muting system features Crest Audio X-Eight consoles are equipped with a MICR OPR OCESSOR MUTE CONTR OLLER which permits the user to set-up a series of MUTE SCENES , each contr olling any combination of channels and outputs.
p. 126 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 127 micr opr ocessor muting system features mute contr oller E — SINGLE SCENE There ar e nine MUTE sources a vailable from the MUTE CONTR OLLER : the eight MANUAL MUTE SCENES H , and the MICR O SCENE G . Normall y any or all of these nine sour ces can be active at-one-time, which allows the operator to combine differ ent mute patterns.
p. 128 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 129 micr opr ocessor muting system features channel mute contr ols J — ST A TUS LED This bi-color LED , associated with each controlled-m ute , shows the con- dition of that mute. One-of-five possible states is possible: 1 OFF —The channel is not controlled b y the MUTE CONTR OLLER .
p. 130 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 131 micr opr ocessor muting system features mute scenes There ar e nine possible scene sources: MANUAL MUTE SCENES 1–8 , and the MICR O SCENE . The MICR O SCENE button G is the enable-switch for the 128 possible SEQUENCED SCENES .
p. 132 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 133 micr opr ocessor muting system features cop ying a mute scene MUTE SCENES can be copied fr om a SEQUENCED SCENE ( P A TCH ) to a MANUAL MUTE SCENE . Man ual MUTES cannot be copied to sequenced scenes or to each other . T o cop y a SEQUENCED SCENE into a MANUAL MUTE SCENE , follow the steps outlined below .
p. 134 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 135 micr opr ocessor muting system features safe scene There ma y be occasions when a channel needs to be made SAFE from all pr ogrammed mutes. This ma y occur during a show when an on-stage micr ophone needs to be used as an announcer’ s mic, or a switch-o ver has to be made to a backup-channel due to some technical difficulty .
p. 136 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 137 micr opr ocessor muting system features utilities The MUTE CONTR OLLER has a number of parameters that the user can change. A UTILITY mode is provided f or accessing these settings. The fol- lowing is a curr ent list of parameters, along with their default and other possible settings.
p. 138 X-Eight owner’ s manual micr opr ocessor muting system module mute contr ol panel typical channel block dia gram LR LR ∑ ∑ 7.
p. 139 micr opr ocessor muting system features changing/re viewing utility settings The UTILITY settings can be accessed b y entering UTILITY mode . Once there, the differ ent parameters can be changed to suit user’ s prefer ences.
p. 140 X-Eight owner’ s manual power supply HS master rear -panel DC In Alt R Out Alt L Out Insert Send Return Right Out Insert Send Return Left Out In In R T group r ear -panel S e n d R e t u r n .
p. 141 power supply power supply usage supply identification The type of pow er supply can be identified by the model number sho wn on the back of the chassis and panel label. po wer r equirements The X-Eight pow er supplies ha v e certain electrical requir ements for pr oper operation.
p. 142 X-Eight owner’ s manual power supply HS master rear -panel DC In Alt R Out Alt L Out Insert Send Return Right Out Insert Send Return Left Out In In R T group r ear -panel S e n d R e t u r n .
p. 143 power supply power supply usage console and po wer supply gr ounding Console chassis gr ound is electrically connected to: the audio ground, pin- 1 of XLR connectors, the sleev es of 1/4” sock ets, and to the terminal CON - SOLE GR OUND at the rear of the po wer supply .
v . 3.0 D7000009 12 / 21 / 99.
An important point after buying a device Peavey X-Eight HS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peavey X-Eight HS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peavey X-Eight HS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peavey X-Eight HS you will learn all the available features of the product, as well as information on its operation. The information that you get Peavey X-Eight HS will certainly help you make a decision on the purchase.
If you already are a holder of Peavey X-Eight HS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peavey X-Eight HS.
However, one of the most important roles played by the user manual is to help in solving problems with Peavey X-Eight HS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peavey X-Eight HS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
