Instruction/ maintenance manual of the product ST 630-S Peerless Industries
Go to page of 7
Max UL Load Capacity: 80 lb (36.3 kg) 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.
2 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 Note: Read entire instruction sheet before you start inst allation and assembly . T ools Needed for Assembly • stud finder ("edge to edge&q.
3 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 G C D E F A B H S T 630P S T 630P -S S T 630 S T 630-S De s cri p ti o n Qty P a rt # P a r t # P a r t # P a rt # A adapter plat e 1 095-1 346 09.
4 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 Inst allation to Single Wood S tud W all 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on its edges, draw a vertical line down the stud’ s center .
5 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 Inst allation to Solid Concrete or Cinder Block 1 Make sure that tilt assembly ( B ) is level, use it as a template to mark two mounting holes. Drill two 1/4" (6 mm) dia. holes to a minimum depth of 2-1/2" (64 mm).
6 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 F *For screens with a hole pattern in a pocket , spacers ( F ) go between adapter plate ( A ) and screen. FOR VESA ® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate ( A ) to back of screen using four M4 x 10 mm screws ( D ) as shown below.
7 of 7 ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09 Attach screen to tilt assembly ( B ). Tighten M5 x 6 mm screw ( H ) to lock screen to tilt assembly . Note: For security models, use security driver ( I ) to tighten M5 x 6 mm screws ( H ). T o remove screen from mount, loosen screw ( H ) and lift screen off of mount.
An important point after buying a device Peerless Industries ST 630-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peerless Industries ST 630-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peerless Industries ST 630-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peerless Industries ST 630-S you will learn all the available features of the product, as well as information on its operation. The information that you get Peerless Industries ST 630-S will certainly help you make a decision on the purchase.
If you already are a holder of Peerless Industries ST 630-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peerless Industries ST 630-S.
However, one of the most important roles played by the user manual is to help in solving problems with Peerless Industries ST 630-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peerless Industries ST 630-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
