Instruction/ maintenance manual of the product DX8UP-512MBRAM Pelco
Go to page of 12
C2612M (5/06) Digital Video Recorder DX8000 DX8UP-512MBRAM Installation Manual.
2 C2612M (5/06) Introduction The following instructions serve as a guide for the installation of the DX8UP-512MBRAM memory expansion module. PARTS LIST Qty Description 1 512 MB double data rate (DDR) dual inline memory module (DIMM) 1 Adhesive-backed upgrade part label Figure 1.
C2612M (5/06) 3 Getting Ready 1. Familiarize yourself with the instructions throughout this manual. 2. Check that you have all the necessary parts and tools.
4 C2612M (5/06) Figure 3. Removing Power Cord from Unit 5. Ensure that the DX8000 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit.
C2612M (5/06) 5 Prepare Unit for RAM Installation OPEN THE UNIT CHASSIS 1. If the DX8000 is mounted in a rack, remove it and transport it to an area that will provide full access to the unit chassis: a. Disconnect any cables or connections that might restrict access to or the removal of the unit.
6 C2612M (5/06) COMPONENT LAYOUT Figure 6 shows the location of your DX8000 Series DVR’ s major components. Certain cables and components have been omitted from the illustrations in this manual for the purpose of clarity .
C2612M (5/06) 7 Install the DX8UP-512MBRAM Memory Module 1. Carefully remove the DX8UP-512MBRAM DIMM module from its static-safe packaging. Handle the DIMM by its edges and avoid contact with the module’ s chips or conductive leads. 2. Locate the first empty DIMM socket.
8 C2612M (5/06) 3. Align the DIMM module with the socket so that the notch in the module lines up properly with the break in the DIMM socket. Refer to Figure 8. 4. Make sure that the white retaining clips are not in the locked position by pressing outward and down on each clip.
C2612M (5/06) 9 Reassemble the Unit 1. Replace the chassis cover using the same screws you removed from the side and rear of the unit. Refer to Figure 10. Figure 10. Replacing Chassis Cover 2. Attach the silver part label that came in your upgrade kit to the inside of your DVR’ s front door .
10 C2612M (5/06) INCREASE PAGING FILE MEMORY SIZE Pelco recommends that you increase the paging file memory size after the DX8UP-512MBRAM module is installed in the memory slot. To increase the paging file memory size: 1. T urn on the power switch and allow the unit to start up and find the new memory .
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco DX8UP-512MBRAM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco DX8UP-512MBRAM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco DX8UP-512MBRAM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco DX8UP-512MBRAM you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco DX8UP-512MBRAM will certainly help you make a decision on the purchase.
If you already are a holder of Pelco DX8UP-512MBRAM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco DX8UP-512MBRAM.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco DX8UP-512MBRAM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco DX8UP-512MBRAM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
